Hi,

On 06/28/2013 12:27 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 12:35 Fri 28 Jun     , Felipe Balbi wrote:
>> > On Fri, Jun 28, 2013 at 04:18:23PM +0900, Jingoo Han wrote:
>>> > > Use the generic PHY API instead of the platform callback to control
>>> > > the DP PHY. The 'phy_label' field is added to the platform data
>>> > > structure to allow PHY lookup on non-dt platforms.
>>> > > 
>>> > > Signed-off-by: Jingoo Han <jg1....@samsung.com>
>>> > > ---
[...]
>>> > > diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt 
>>> > > b/Documentation/devicetree/bindings/video/exynos_dp.txt
>>> > > index 84f10c1..a8320e3 100644
>>> > > --- a/Documentation/devicetree/bindings/video/exynos_dp.txt
>>> > > +++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
>>> > > @@ -1,17 +1,6 @@
>>> > >  The Exynos display port interface should be configured based on
>>> > >  the type of panel connected to it.
>>> > >  
>>> > > -We use two nodes:
>>> > > -       -dp-controller node
>>> > > -       -dptx-phy node(defined inside dp-controller node)
>>> > > -
>>> > > -For the DP-PHY initialization, we use the dptx-phy node.
>>> > > -Required properties for dptx-phy:
>>> > > -       -reg:
>>> > > -               Base address of DP PHY register.
>>> > > -       -samsung,enable-mask:
>>> > > -               The bit-mask used to enable/disable DP PHY.
>>> > > -
>>> > >  For the Panel initialization, we read data from dp-controller node.
>>> > >  Required properties for dp-controller:
>>> > >         -compatible:
>>> > > @@ -67,12 +56,6 @@ SOC specific portion:
>>> > >                 interrupt-parent = <&combiner>;
>>> > >                 clocks = <&clock 342>;
>>> > >                 clock-names = "dp";
>>> > > -
>>> > > -               dptx-phy {
>>> > > -                       reg = <0x10040720>;
>>> > > -                       samsung,enable-mask = <1>;
>>> > > -               };
>
> I've an issue here you break dt compatibilty

Indeed. Ideally the PHYs should be detachable from the controllers.
I'd assume such a change could be acceptable, given that the driver
still supports the original binding.

--
Thanks,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to