Use the generic PHY API to control the DP PHY.
Signed-off-by: Jingoo Han <jg1....@samsung.com>
Reviewed-by: Tomasz Figa <t.f...@samsung.com>
---
.../devicetree/bindings/video/exynos_dp.txt | 18 +++++++++---------
drivers/video/exynos/exynos_dp_core.c | 16 ++++++++++++----
drivers/video/exynos/exynos_dp_core.h | 1 +
3 files changed, 22 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt
b/Documentation/devicetree/bindings/video/exynos_dp.txt
index c60da67..e2874ae 100644
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -6,10 +6,10 @@ We use two nodes:
-dptx-phy node(defined inside dp-controller node)
For the DP-PHY initialization, we use the dptx-phy node.
-Required properties for dptx-phy:
- -reg:
+Required properties for dptx-phy: deprecated, use phys and phy-names
+ -reg: deprecated
Base address of DP PHY register.
- -samsung,enable-mask:
+ -samsung,enable-mask: deprecated
The bit-mask used to enable/disable DP PHY.
For the Panel initialization, we read data from dp-controller node.
@@ -21,6 +21,10 @@ Required properties for dp-controller:
of memory mapped region.
-interrupts:
interrupt combiner values.
+ -phys:
+ from general PHY binding: the phandle for the PHY device.
+ -phy-names:
+ from general PHY binding: Should be "dp".
-interrupt-parent:
phandle to Interrupt combiner node.
-samsung,color-space:
@@ -61,12 +65,8 @@ SOC specific portion:
reg = <0x145b0000 0x10000>;
interrupts = <10 3>;
interrupt-parent = <&combiner>;
-
- dptx-phy {
- reg = <0x10040720>;
- samsung,enable-mask = <1>;
- };
-
+ phys = <&dp_phy>;
+ phy-names = "dp";
};
Board Specific portion:
diff --git a/drivers/video/exynos/exynos_dp_core.c
b/drivers/video/exynos/exynos_dp_core.c
index 05fed7d..5e1a715 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -19,6 +19,7 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/of.h>
+#include <linux/phy/phy.h>
#include "exynos_dp_core.h"
@@ -960,8 +961,11 @@ static int exynos_dp_dt_parse_phydata(struct
exynos_dp_device *dp)
dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
if (!dp_phy_node) {
- dev_err(dp->dev, "could not find dptx-phy node\n");
- return -ENODEV;
+ dp->phy = devm_phy_get(dp->dev, "dp");
+ if (IS_ERR(dp->phy))
+ return PTR_ERR(dp->phy);
+ else
+ return 0;
}
if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
@@ -992,7 +996,9 @@ err:
static void exynos_dp_phy_init(struct exynos_dp_device *dp)
{
- if (dp->phy_addr) {
+ if (dp->phy) {
+ phy_power_on(dp->phy);
+ } else if (dp->phy_addr) {
u32 reg;
reg = __raw_readl(dp->phy_addr);
@@ -1003,7 +1009,9 @@ static void exynos_dp_phy_init(struct exynos_dp_device
*dp)
static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
{
- if (dp->phy_addr) {
+ if (dp->phy) {
+ phy_power_off(dp->phy);
+ } else if (dp->phy_addr) {
u32 reg;
reg = __raw_readl(dp->phy_addr);
diff --git a/drivers/video/exynos/exynos_dp_core.h
b/drivers/video/exynos/exynos_dp_core.h
index 56cfec8..607e36d 100644
--- a/drivers/video/exynos/exynos_dp_core.h
+++ b/drivers/video/exynos/exynos_dp_core.h
@@ -151,6 +151,7 @@ struct exynos_dp_device {
struct video_info *video_info;
struct link_train link_train;
struct work_struct hotplug_work;
+ struct phy *phy;
};
/* exynos_dp_reg.c */
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
