Replace clk_enable by clock_enable_prepare and clk_disable with 
clk_disable_unprepare.
Clock prepare is required by Clock Common Framework, and old clock driver 
didn`t support it.
Without it Common Clock Framework prints a warning.

Signed-off-by: Mateusz Krawczuk <m.krawc...@partner.samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
---
 drivers/media/platform/s5p-tv/sdo_drv.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/s5p-tv/sdo_drv.c 
b/drivers/media/platform/s5p-tv/sdo_drv.c
index e49ac6c..17272e1 100644
--- a/drivers/media/platform/s5p-tv/sdo_drv.c
+++ b/drivers/media/platform/s5p-tv/sdo_drv.c
@@ -208,9 +208,9 @@ static int sdo_streamon(struct sdo_device *sdev)
        clk_get_rate(sdev->fout_vpll));
        /* enable clock in SDO */
        sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_CLOCK_ON);
-       ret = clk_enable(sdev->dacphy);
+       ret = clk_prepare_enable(sdev->dacphy);
        if (ret < 0) {
-               dev_err(sdev->dev, "clk_enable(dacphy) failed\n");
+               dev_err(sdev->dev, "clk_prepare_enable(dacphy) failed\n");
                goto fail;
        }
        /* enable DAC */
@@ -229,7 +229,7 @@ static int sdo_streamoff(struct sdo_device *sdev)
        int tries;
 
        sdo_write_mask(sdev, SDO_DAC, 0, SDO_POWER_ON_DAC);
-       clk_disable(sdev->dacphy);
+       clk_disable_unprepare(sdev->dacphy);
        sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_CLOCK_ON);
        for (tries = 100; tries; --tries) {
                if (sdo_read(sdev, SDO_CLKCON) & SDO_TVOUT_CLOCK_READY)
@@ -273,7 +273,7 @@ static int sdo_runtime_suspend(struct device *dev)
        dev_info(dev, "suspend\n");
        regulator_disable(sdev->vdet);
        regulator_disable(sdev->vdac);
-       clk_disable(sdev->sclk_dac);
+       clk_disable_unprepare(sdev->sclk_dac);
        return 0;
 }
 
@@ -285,7 +285,7 @@ static int sdo_runtime_resume(struct device *dev)
 
        dev_info(dev, "resume\n");
 
-       ret = clk_enable(sdev->sclk_dac);
+       ret = clk_prepare_enable(sdev->sclk_dac);
        if (ret < 0)
                return ret;
 
@@ -318,7 +318,7 @@ static int sdo_runtime_resume(struct device *dev)
 vdac_r_dis:
        regulator_disable(sdev->vdac);
 dac_clk_dis:
-       clk_disable(sdev->sclk_dac);
+       clk_disable_unprepare(sdev->sclk_dac);
        return ret;
 }
 
@@ -424,7 +424,11 @@ static int sdo_probe(struct platform_device *pdev)
        }
 
        /* enable gate for dac clock, because mixer uses it */
-       clk_enable(sdev->dac);
+       ret = clk_prepare_enable(sdev->dac);
+       if (ret < 0) {
+               dev_err(dev, "clk_prepare_enable(dac) failed\n");
+               goto fail_fout_vpll;
+       }
 
        /* configure power management */
        pm_runtime_enable(dev);
@@ -463,7 +467,7 @@ static int sdo_remove(struct platform_device *pdev)
        struct sdo_device *sdev = sd_to_sdev(sd);
 
        pm_runtime_disable(&pdev->dev);
-       clk_disable(sdev->dac);
+       clk_disable_unprepare(sdev->dac);
        clk_put(sdev->fout_vpll);
        clk_put(sdev->dacphy);
        clk_put(sdev->dac);
-- 
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to