Hi Srinivas, Thanks for the patch. Several nits below.
On Fri, Sep 27, 2013 at 2:32 PM, Srinivas KANDAGATLA <srinivas.kandaga...@st.com> wrote: > From: Srinivas Kandagatla <srinivas.kandaga...@st.com> > > This patch adds support to ST RC driver, which is basically a IR/UHF > receiver and transmitter. This IP (IRB) is common across all the ST > parts for settop box platforms. IRB is embedded in ST COMMS IP block. > It supports both Rx & Tx functionality. > > This driver adds only Rx functionality via LIRC codec. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@st.com> > Acked-by: Sean Young <s...@mess.org> > --- > Hi Chehab, > > This is a very simple rc driver for IRB controller found in STi SOCs. > This driver is a raw driver which feeds data to lirc codec for the user lircd > to decode the keys. > > This patch is based on v3.12-rc1. > > Changes since v4: > - updated dt bindings doc with suggestions from Stephen W. > > Changes since v3: > - updated dt bindings doc with suggestions from Mark R. > > Changes since v2: > - Updated Kconfig dependencies as suggested by Sean and Chehab. > - Fixed a logical check spoted by Sean. > > Changes since v1: > - Device tree bindings cleaned up as suggested by Mark and Pawel > - use ir_raw_event_reset under overflow conditions as suggested by > Sean. > - call ir_raw_event_handle in interrupt handler as suggested by Sean. > - correct allowed_protos flag with RC_BIT_ types as suggested by Sean. > - timeout and rx resolution added as suggested by Sean. > > Thankyou all for reviewing and commenting. > > Thanks, > srini > Documentation/devicetree/bindings/media/st-rc.txt | 27 ++ > drivers/media/rc/Kconfig | 10 + > drivers/media/rc/Makefile | 1 + > drivers/media/rc/st_rc.c | 396 > +++++++++++++++++++++ > 4 files changed, 434 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/st-rc.txt > create mode 100644 drivers/media/rc/st_rc.c > > diff --git a/Documentation/devicetree/bindings/media/st-rc.txt > b/Documentation/devicetree/bindings/media/st-rc.txt > new file mode 100644 > index 0000000..797ef39 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/st-rc.txt > @@ -0,0 +1,27 @@ > +Device-Tree bindings for ST IRB IP > + > +Required properties: > + - compatible: Should contain "st,comms-irb". > + - reg: Base physical address of the controller and length of memory > + mapped region. > + - interrupts: interrupt-specifier for the sole interrupt generated by > + the device. The interrupt specifier format depends on the interrupt > + controller parent. > + - rx-mode: can be "infrared" or "uhf". rx-mode should be present iff > + the rx pins are wired up. > + - tx-mode: should be "infrared". tx-mode should be present iff the tx > + pins are wired up. > + > +Optional properties: > + - pinctrl-names, pinctrl-0: the pincontrol settings to configure > muxing > + properly for IRB pins. > + - clocks : phandle with clock-specifier pair for IRB block. > + > +Example node: > + > + rc: rc@fe518000 { > + compatible = "st,comms-irb"; > + reg = <0xfe518000 0x234>; > + interrupts = <0 203 0>; > + rx-mode = "infrared"; > + }; > diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig > index 11e84bc..557afc5 100644 > --- a/drivers/media/rc/Kconfig > +++ b/drivers/media/rc/Kconfig > @@ -322,4 +322,14 @@ config IR_GPIO_CIR > To compile this driver as a module, choose M here: the module will > be called gpio-ir-recv. > > +config RC_ST > + tristate "ST remote control receiver" > + depends on ARCH_STI && RC_CORE > + help > + Say Y here if you want support for ST remote control driver > + which allows both IR and UHF RX. > + The driver passes raw pluse and space information to the LIRC > decoder. > + s/pluse/pulse > + If you're not sure, select N here. > + > endif #RC_DEVICES > diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile > index 56bacf0..f4eb32c 100644 > --- a/drivers/media/rc/Makefile > +++ b/drivers/media/rc/Makefile > @@ -30,3 +30,4 @@ obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o > obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o > obj-$(CONFIG_IR_IGUANA) += iguanair.o > obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o > +obj-$(CONFIG_RC_ST) += st_rc.o > diff --git a/drivers/media/rc/st_rc.c b/drivers/media/rc/st_rc.c > new file mode 100644 > index 0000000..e2dad9c > --- /dev/null > +++ b/drivers/media/rc/st_rc.c > @@ -0,0 +1,396 @@ > +/* > + * Copyright (C) 2013 STMicroelectronics Limited > + * Author: Srinivas Kandagatla <srinivas.kandaga...@st.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + */ > +#include <linux/kernel.h> > +#include <linux/clk.h> > +#include <linux/interrupt.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > +#include <media/rc-core.h> > +#include <linux/pinctrl/consumer.h> > + > +struct st_rc_device { > + struct device *dev; > + int irq; > + int irq_wake; > + struct clk *sys_clock; > + void *base; /* Register base address */ > + void *rx_base;/* RX Register base address > */ > + struct rc_dev *rdev; > + bool overclocking; > + int sample_mult; > + int sample_div; > + bool rxuhfmode; > +}; > + > +/* Registers */ > +#define IRB_SAMPLE_RATE_COMM 0x64 /* sample freq divisor*/ > +#define IRB_CLOCK_SEL 0x70 /* clock select */ > +#define IRB_CLOCK_SEL_STATUS 0x74 /* clock status */ > +/* IRB IR/UHF receiver registers */ > +#define IRB_RX_ON 0x40 /* pulse time capture */ > +#define IRB_RX_SYS 0X44 /* sym period capture */ > +#define IRB_RX_INT_EN 0x48 /* IRQ enable (R/W) */ > +#define IRB_RX_INT_STATUS 0x4C /* IRQ status (R/W) */ > +#define IRB_RX_EN 0x50 /* Receive enablei */ s/enablei/enable > +#define IRB_MAX_SYM_PERIOD 0x54 /* max sym value */ > +#define IRB_RX_INT_CLEAR 0x58 /* overrun status */ > +#define IRB_RX_STATUS 0x6C /* receive status */ > +#define IRB_RX_NOISE_SUPPR 0x5C /* noise suppression */ > +#define IRB_RX_POLARITY_INV 0x68 /* polarity inverter */ > + generally smaller case hex letters are preferred > +/** > + * IRQ set: Enable full FIFO 1 -> bit 3; > + * Enable overrun IRQ 1 -> bit 2; > + * Enable last symbol IRQ 1 -> bit 1: > + * Enable RX interrupt 1 -> bit 0; > + */ > +#define IRB_RX_INTS 0x0f > +#define IRB_RX_OVERRUN_INT 0x04 > + /* maximum symbol period (microsecs),timeout to detect end of symbol train > */ > +#define MAX_SYMB_TIME 0x5000 > +#define IRB_SAMPLE_FREQ 10000000 > +#define IRB_FIFO_NOT_EMPTY 0xff00 > +#define IRB_OVERFLOW 0x4 > +#define IRB_TIMEOUT 0xffff > +#define IR_ST_NAME "st-rc" > + > +static void st_rc_send_lirc_timeout(struct rc_dev *rdev) > +{ > + DEFINE_IR_RAW_EVENT(ev); > + ev.timeout = true; > + ir_raw_event_store(rdev, &ev); > +} > + > +/** > + * RX graphical example to better understand the difference between ST IR > block > + * output and standard definition used by LIRC (and most of the world!) > + * > + * mark mark > + * |-IRB_RX_ON-| |-IRB_RX_ON-| > + * ___ ___ ___ ___ ___ ___ _ > + * | | | | | | | | | | | | | > + * | | | | | | space 0 | | | | | | space 1 | > + * _____| |__| |__| |____________________________| |__| |__| |_____________| > + * > + * |--------------- IRB_RX_SYS -------------|------ IRB_RX_SYS -------| > + * > + * |------------- encoding bit 0 -----------|---- encoding bit 1 -----| > + * > + * ST hardware returns mark (IRB_RX_ON) and total symbol time (IRB_RX_SYS), > so > + * convert to standard mark/space we have to calculate > space=(IRB_RX_SYS-mark) > + * The mark time represents the amount of time the carrier (usually 36-40kHz) > + * is detected.The above examples shows Pulse Width Modulation encoding where > + * bit 0 is represented by space>mark. > + */ > + > +static irqreturn_t st_rc_rx_interrupt(int irq, void *data) > +{ > + unsigned int symbol, mark = 0; > + struct st_rc_device *dev = data; > + int last_symbol = 0; > + u32 status; > + DEFINE_IR_RAW_EVENT(ev); > + > + if (dev->irq_wake) > + pm_wakeup_event(dev->dev, 0); > + > + status = readl(dev->rx_base + IRB_RX_STATUS); > + > + while (status & (IRB_FIFO_NOT_EMPTY | IRB_OVERFLOW)) { > + u32 int_status = readl(dev->rx_base + IRB_RX_INT_STATUS); > + if (unlikely(int_status & IRB_RX_OVERRUN_INT)) { > + /* discard the entire collection in case of errors! > */ > + ir_raw_event_reset(dev->rdev); > + dev_info(dev->dev, "IR RX overrun\n"); > + writel(IRB_RX_OVERRUN_INT, > + dev->rx_base + IRB_RX_INT_CLEAR); > + continue; > + } > + > + symbol = readl(dev->rx_base + IRB_RX_SYS); > + mark = readl(dev->rx_base + IRB_RX_ON); > + > + if (symbol == IRB_TIMEOUT) > + last_symbol = 1; > + > + /* Ignore any noise */ > + if ((mark > 2) && (symbol > 1)) { > + symbol -= mark; > + if (dev->overclocking) { /* adjustments to timings */ > + symbol *= dev->sample_mult; > + symbol /= dev->sample_div; > + mark *= dev->sample_mult; > + mark /= dev->sample_div; > + } > + > + ev.duration = US_TO_NS(mark); > + ev.pulse = true; > + ir_raw_event_store(dev->rdev, &ev); > + > + if (!last_symbol) { > + ev.duration = US_TO_NS(symbol); > + ev.pulse = false; > + ir_raw_event_store(dev->rdev, &ev); > + } else { > + st_rc_send_lirc_timeout(dev->rdev); > + } > + > + } > + last_symbol = 0; > + status = readl(dev->rx_base + IRB_RX_STATUS); > + } > + > + writel(IRB_RX_INTS, dev->rx_base + IRB_RX_INT_CLEAR); > + > + /* Empty software fifo */ > + ir_raw_event_handle(dev->rdev); > + return IRQ_HANDLED; > +} > + > +static void st_rc_hardware_init(struct st_rc_device *dev) > +{ > + int baseclock, freqdiff; > + unsigned int rx_max_symbol_per = MAX_SYMB_TIME; > + unsigned int rx_sampling_freq_div; > + > + clk_prepare_enable(dev->sys_clock); > + baseclock = clk_get_rate(dev->sys_clock); > + > + /* IRB input pins are inverted internally from high to low. */ > + writel(1, dev->rx_base + IRB_RX_POLARITY_INV); > + > + rx_sampling_freq_div = baseclock / IRB_SAMPLE_FREQ; > + writel(rx_sampling_freq_div, dev->base + IRB_SAMPLE_RATE_COMM); > + > + freqdiff = baseclock - (rx_sampling_freq_div * IRB_SAMPLE_FREQ); > + if (freqdiff) { /* over clocking, workout the adjustment factors */ > + dev->overclocking = true; > + dev->sample_mult = 1000; > + dev->sample_div = baseclock / (10000 * rx_sampling_freq_div); > + rx_max_symbol_per = (rx_max_symbol_per * > 1000)/dev->sample_div; > + } > + > + writel(rx_max_symbol_per, dev->rx_base + IRB_MAX_SYM_PERIOD); > +} > + > +static int st_rc_remove(struct platform_device *pdev) > +{ > + struct st_rc_device *rc_dev = platform_get_drvdata(pdev); > + clk_disable_unprepare(rc_dev->sys_clock); > + rc_unregister_device(rc_dev->rdev); > + return 0; > +} > + > +static int st_rc_open(struct rc_dev *rdev) > +{ > + struct st_rc_device *dev = rdev->priv; > + unsigned long flags; > + local_irq_save(flags); > + /* enable interrupts and receiver */ > + writel(IRB_RX_INTS, dev->rx_base + IRB_RX_INT_EN); > + writel(0x01, dev->rx_base + IRB_RX_EN); > + local_irq_restore(flags); > + > + return 0; > +} > + > +static void st_rc_close(struct rc_dev *rdev) > +{ > + struct st_rc_device *dev = rdev->priv; > + /* disable interrupts and receiver */ > + writel(0x00, dev->rx_base + IRB_RX_EN); > + writel(0x00, dev->rx_base + IRB_RX_INT_EN); > +} > + > +static int st_rc_probe(struct platform_device *pdev) > +{ > + int ret = -EINVAL; > + struct rc_dev *rdev; > + struct device *dev = &pdev->dev; > + struct resource *res; > + struct st_rc_device *rc_dev; > + struct device_node *np = pdev->dev.of_node; > + const char *rx_mode; > + > + rc_dev = devm_kzalloc(dev, sizeof(struct st_rc_device), GFP_KERNEL); > + > + if (!rc_dev) > + return -ENOMEM; > + > + rdev = rc_allocate_device(); > + > + if (!rdev) > + return -ENOMEM; > + > + if (np && !of_property_read_string(np, "rx-mode", &rx_mode)) { > + > + if (!strcmp(rx_mode, "uhf")) { > + rc_dev->rxuhfmode = true; > + } else if (!strcmp(rx_mode, "infrared")) { > + rc_dev->rxuhfmode = false; > + } else { > + dev_err(dev, "Unsupported rx mode [%s]\n", rx_mode); > + goto err; > + } > + > + } else { > + goto err; > + } > + > + rc_dev->sys_clock = devm_clk_get(dev, NULL); > + if (IS_ERR(rc_dev->sys_clock)) { > + dev_err(dev, "System clock not found\n"); > + ret = PTR_ERR(rc_dev->sys_clock); > + goto err; > + } > + > + rc_dev->irq = platform_get_irq(pdev, 0); > + if (rc_dev->irq < 0) { > + ret = rc_dev->irq; > + goto clkerr; > + } > + > + ret = -ENODEV; Not required > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) > + goto clkerr; > + This check is not required. > + rc_dev->base = devm_ioremap_resource(dev, res); > + if (IS_ERR(rc_dev->base)) > + goto clkerr; > + In case of error assin ret to PTR_ERR(rc_dev->base) > + if (rc_dev->rxuhfmode) > + rc_dev->rx_base = rc_dev->base + 0x40; > + else > + rc_dev->rx_base = rc_dev->base; > + > + rc_dev->dev = dev; > + platform_set_drvdata(pdev, rc_dev); > + st_rc_hardware_init(rc_dev); > + > + rdev->driver_type = RC_DRIVER_IR_RAW; > + rdev->allowed_protos = RC_BIT_ALL; > + /* rx sampling rate is 10Mhz */ > + rdev->rx_resolution = 100; > + rdev->timeout = US_TO_NS(MAX_SYMB_TIME); > + rdev->priv = rc_dev; > + rdev->open = st_rc_open; > + rdev->close = st_rc_close; > + rdev->driver_name = IR_ST_NAME; > + rdev->map_name = RC_MAP_LIRC; > + rdev->input_name = "ST Remote Control Receiver"; > + > + /* enable wake via this device */ > + device_set_wakeup_capable(dev, true); > + device_set_wakeup_enable(dev, true); > + > + ret = rc_register_device(rdev); > + if (ret < 0) > + goto clkerr; > + > + rc_dev->rdev = rdev; > + if (devm_request_irq(dev, rc_dev->irq, st_rc_rx_interrupt, > + IRQF_NO_SUSPEND, IR_ST_NAME, rc_dev) < 0) { > + dev_err(dev, "IRQ %d register failed\n", rc_dev->irq); > + ret = -EINVAL; > + goto rcerr; > + } > + > + /** > + * for LIRC_MODE_MODE2 or LIRC_MODE_PULSE or LIRC_MODE_RAW > + * lircd expects a long space first before a signal train to sync. > + */ > + st_rc_send_lirc_timeout(rdev); > + > + dev_info(dev, "setup in %s mode\n", rc_dev->rxuhfmode ? "UHF" : "IR"); > + > + return ret; > +rcerr: > + rc_unregister_device(rdev); > + rdev = NULL; > +clkerr: > + clk_disable_unprepare(rc_dev->sys_clock); > +err: > + rc_free_device(rdev); > + dev_err(dev, "Unable to register device (%d)\n", ret); > + return ret; > +} > + > +#ifdef CONFIG_PM > +static int st_rc_suspend(struct device *dev) > +{ > + struct st_rc_device *rc_dev = dev_get_drvdata(dev); > + > + if (device_may_wakeup(dev)) { > + if (!enable_irq_wake(rc_dev->irq)) > + rc_dev->irq_wake = 1; > + else > + return -EINVAL; > + } else { > + pinctrl_pm_select_sleep_state(dev); > + writel(0x00, rc_dev->rx_base + IRB_RX_EN); > + writel(0x00, rc_dev->rx_base + IRB_RX_INT_EN); > + clk_disable_unprepare(rc_dev->sys_clock); > + } > + > + return 0; > +} > + > +static int st_rc_resume(struct device *dev) > +{ > + struct st_rc_device *rc_dev = dev_get_drvdata(dev); > + struct rc_dev *rdev = rc_dev->rdev; > + > + if (rc_dev->irq_wake) { > + disable_irq_wake(rc_dev->irq); > + rc_dev->irq_wake = 0; > + } else { > + pinctrl_pm_select_default_state(dev); > + st_rc_hardware_init(rc_dev); > + if (rdev->users) { > + writel(IRB_RX_INTS, rc_dev->rx_base + IRB_RX_INT_EN); > + writel(0x01, rc_dev->rx_base + IRB_RX_EN); > + } > + } > + > + return 0; > +} > + > +static SIMPLE_DEV_PM_OPS(st_rc_pm_ops, st_rc_suspend, st_rc_resume); > +#endif > + > +#ifdef CONFIG_OF > +static struct of_device_id st_rc_match[] = { > + { .compatible = "st,comms-irb", }, > + {}, > +}; > + > +MODULE_DEVICE_TABLE(of, st_rc_match); > +#endif > + > +static struct platform_driver st_rc_driver = { > + .driver = { > + .name = IR_ST_NAME, > + .owner = THIS_MODULE, > + .of_match_table = of_match_ptr(st_rc_match), > +#ifdef CONFIG_PM > + .pm = &st_rc_pm_ops, > +#endif > + }, > + .probe = st_rc_probe, > + .remove = st_rc_remove, > +}; > + > +module_platform_driver(st_rc_driver); > + > +MODULE_DESCRIPTION("RC Transceiver driver for STMicroelectronics platforms"); > +MODULE_AUTHOR("STMicroelectronics (R&D) Ltd"); > +MODULE_LICENSE("GPL"); > -- Regards, --Prabhakar Lad -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html