On 11/02/2013 10:15 PM, Mauro Carvalho Chehab wrote:
> Em Sat, 02 Nov 2013 18:25:19 +0100
> Hans Verkuil <hverk...@xs4all.nl> escreveu:
>
>> Hi Mauro,
>>
>> I'll review this series more carefully on Monday,
>
> Thanks!
>
>> but for now I want to make
>> a suggestion for the array checks:
>>
>> On 11/02/2013 02:31 PM, Mauro Carvalho Chehab wrote:
>>> Dynamic static allocation is evil, as Kernel stack is too low, and
>>> compilation complains about it on some archs:
>>>
>>> drivers/media/tuners/e4000.c:50:1: warning: 'e4000_wr_regs' uses
>>> dynamic stack allocation [enabled by default]
>>> drivers/media/tuners/e4000.c:83:1: warning: 'e4000_rd_regs' uses
>>> dynamic stack allocation [enabled by default]
>>> drivers/media/tuners/fc2580.c:66:1: warning:
>>> 'fc2580_wr_regs.constprop.1' uses dynamic stack allocation [enabled by
>>> default]
>>> drivers/media/tuners/fc2580.c:98:1: warning:
>>> 'fc2580_rd_regs.constprop.0' uses dynamic stack allocation [enabled by
>>> default]
>>> drivers/media/tuners/tda18212.c:57:1: warning: 'tda18212_wr_regs' uses
>>> dynamic stack allocation [enabled by default]
>>> drivers/media/tuners/tda18212.c:90:1: warning:
>>> 'tda18212_rd_regs.constprop.0' uses dynamic stack allocation [enabled by
>>> default]
>>> drivers/media/tuners/tda18218.c:60:1: warning: 'tda18218_wr_regs' uses
>>> dynamic stack allocation [enabled by default]
>>> drivers/media/tuners/tda18218.c:92:1: warning:
>>> 'tda18218_rd_regs.constprop.0' uses dynamic stack allocation [enabled by
>>> default]
>>>
>>> Instead, let's enforce a limit for the buffer. Considering that I2C
>>> transfers are generally limited, and that devices used on USB has a
>>> max data length of 80, it seem safe to use 80 as the hard limit for all
>>> those devices. On most cases, the limit is a way lower than that, but
>>> 80 is small enough to not affect the Kernel stack, and it is a no brain
>>> limit, as using smaller ones would require to either carefully each
>>> driver or to take a look on each datasheet.
>>>
>>> Signed-off-by: Mauro Carvalho Chehab <m.che...@samsung.com>
>>> Cc: Antti Palosaari <cr...@iki.fi>
>>> ---
>>> drivers/media/tuners/e4000.c | 18 ++++++++++++++++--
>>> drivers/media/tuners/fc2580.c | 18 ++++++++++++++++--
>>> drivers/media/tuners/tda18212.c | 18 ++++++++++++++++--
>>> drivers/media/tuners/tda18218.c | 18 ++++++++++++++++--
>>> 4 files changed, 64 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/drivers/media/tuners/e4000.c b/drivers/media/tuners/e4000.c
>>> index ad9309da4a91..235e90251609 100644
>>> --- a/drivers/media/tuners/e4000.c
>>> +++ b/drivers/media/tuners/e4000.c
>>> @@ -24,7 +24,7 @@
>>> static int e4000_wr_regs(struct e4000_priv *priv, u8 reg, u8 *val, int len)
>>> {
>>> int ret;
>>> - u8 buf[1 + len];
>>> + u8 buf[80];
>>> struct i2c_msg msg[1] = {
>>> {
>>> .addr = priv->cfg->i2c_addr,
>>> @@ -34,6 +34,13 @@ static int e4000_wr_regs(struct e4000_priv *priv, u8
>>> reg, u8 *val, int len)
>>> }
>>> };
>>>
>>> + if (1 + len > sizeof(buf)) {
>>> + dev_warn(&priv->i2c->dev,
>>> + "%s: i2c wr reg=%04x: len=%d is too big!\n",
>>> + KBUILD_MODNAME, reg, len);
>>> + return -EREMOTEIO;
>>> + }
>>> +
>>
>> I think this can be greatly simplified to:
>>
>> if (WARN_ON(len + 1 > sizeof(buf))
>> return -EREMOTEIO;
>>
>> This should really never happen, and it is a clear driver bug if it does.
>> WARN_ON
>> does the job IMHO.
>
> Works for me. I'll wait for more comments, and go for it on v3.
>
>> I also don't like the EREMOTEIO error: it has nothing to do with
>> an I/O problem. Wouldn't EMSGSIZE be much better here?
>
>
> EMSGSIZE is not used yet at drivers/media. So, it is probably not the
> right error code.
>
> I remember that there's an error code for that on I2C (EOPNOTSUPP?).
>
> In any case, I don't think we should use an unusual error code here.
> In theory, this error should never happen, but we don't want to break
> userspace because of it. That's why I opted to use EREMOTEIO: this is
> the error code that most of those drivers return when something gets
> wrong during I2C transfers.
The problem I have is that EREMOTEIO is used when the i2c transfer fails,
i.e. there is some sort of a hardware or communication problem.
That's not the case here, it's an argument error. So EINVAL would actually
be better, but that's perhaps overused which is why I suggested EMSGSIZE.
I personally don't think EIO or EREMOTEIO should be used for something that
is not hardware related. I'm sure there are some gray areas, but this
particular situation is clearly not hardware-related.
So if EMSGSIZE won't work for you, then I prefer EINVAL over EREMOTEIO.
ENOMEM is also an option (you are after all 'out of buffer memory').
A bit more exotic, but still sort of in the area, is EPROTO.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
