The patch adds the DT binding documentation for Samsung
Exynos5 SoC series imaging subsystem (FIMC-IS).
Signed-off-by: Arun Kumar K <arun...@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawro...@samsung.com>
Acked-by: Mark Rutland <mark.rutl...@arm.com>
---
.../devicetree/bindings/media/exynos5-fimc-is.txt | 113 ++++++++++++++++++++
1 file changed, 113 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/exynos5-fimc-is.txt
diff --git a/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt
b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt
new file mode 100644
index 0000000..658d4a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt
@@ -0,0 +1,113 @@
+Samsung EXYNOS5 SoC series Imaging Subsystem (FIMC-IS)
+------------------------------------------------------
+
+The camera subsystem on Samsung Exynos5 SoC has some changes relative
+to previous SoC versions. Exynos5 has almost similar MIPI-CSIS and
+FIMC-LITE IPs but has a much improved version of FIMC-IS which can
+handle sensor controls and camera post-processing operations. The
+Exynos5 FIMC-IS has a dedicated ARM Cortex A5 processor, many
+post-processing blocks (ISP, DRC, FD, ODC, DIS, 3DNR) and two
+dedicated scalers (SCC and SCP).
+
+fimc-is node
+------------
+
+Required properties:
+
+- compatible : should contain "samsung,exynos5250-fimc-is"
+- reg : physical base address and size of the memory mapped
+ registers
+- interrupts : interrupt-specifier for the fimc-is interrupt
+- clocks : list of clock specifiers, corresponding to entries in
+ clock-names property
+- clock-names : must contain "isp", "mcu_isp", "isp_div0", "isp_div1",
+ "isp_divmpwm", "mcu_isp_div0", "mcu_isp_div1" entries,
+ matching entries in the clocks property
+- samsung,pmu : phandle to the Power Management Unit (PMU) node
+
+i2c-isp (ISP I2C bus controller) nodes
+--------------------------------------
+The i2c-isp nodes should be children of the fimc-is node.
+
+Required properties:
+
+- compatible : must contain "samsung,exynos4212-i2c-isp" for Exynos4212,
+ Exynos4412 and Exynos5250 SoCs
+- reg : physical base address and length of the registers set
+- clocks : should contain gate clock specifier for this controller
+- clock-names : should contain "i2c_isp" for the gate clock
+- pinctrl-0 : phandle of the pinctrl node for the i2c isp
+- pinctrl-names : must contain "default"
+
+ranges, #address-cells, and #size-cells should be present as appropriate.
+
+Device tree nodes of the image sensors controlled directly by the FIMC-IS
+firmware must be child nodes of their corresponding ISP I2C bus controller
node.
+The data link of these image sensors must be specified using the common video
+interfaces bindings, defined in video-interfaces.txt.
+
+Example:
+
+ fimc_is: fimc-is@13000000 {
+ compatible = "samsung,exynos5250-fimc-is";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ reg = <0x13000000 0x200000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <19 1>;
+ clocks = <&clock 346>, <&clock 347>, <&clock 512>,
+ <&clock 513>, <&clock 514>, <&clock 515>,
+ <&clock 516>;
+ clock-names = "isp", "mcu_isp", "isp_div0", "isp_div1",
+ "isp_divmpwm", "mcu_isp_div0",
+ "mcu_isp_div1";
+ samsung,pmu = <&pmu>;
+
+ i2c0_isp: i2c-isp@13130000 {
+ compatible = "samsung,exynos4212-i2c-isp";
+ reg = <0x13130000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock 352>;
+ clock-names = "i2c_isp";
+ pinctrl-0 = <&cam_i2c0_bus>;
+ pinctrl-names = "default";
+ };
+
+ i2c1_isp: i2c-isp@13140000 {
+ compatible = "samsung,exynos4212-i2c-isp";
+ reg = <0x13140000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock 353>;
+ clock-names = "i2c_isp";
+ pinctrl-0 = <&cam_i2c1_bus>;
+ pinctrl-names = "default";
+ };
+ };
+
+In the board specific file the sensor nodes can be provided. For the sensor
+node documentation for s5k4e5, please refer to samsung-s5k4e5.txt
+
+ fimc-is@13000000 {
+ status = "okay";
+
+ i2c-isp@13130000 {
+ s5k4e5@20 {
+ compatible = "samsung,s5k4e5";
+ reg = <0x20>;
+ reset-gpios = <&gpx1 2 1>;
+ clock-frequency = <24000000>;
+ clocks = <&clock 129>;
+ clock-names = "extclk";
+ svdda-supply = <&vdd>;
+ svddio-supply = <&vdd>;
+ port {
+ is_s5k4e5_ep: endpoint {
+ remote-endpoint = <&csis0_ep>;
+ };
+ };
+ };
+ };
+ };
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
