On Thu, Nov 7, 2013 at 3:40 AM, Hans Verkuil <hverk...@xs4all.nl> wrote:
> On 11/05/2013 03:18 PM, edubez...@gmail.com wrote:
>> Dinesh
>>
>> On Tue, Oct 15, 2013 at 11:24 AM, Dinesh Ram <dinesh....@cern.ch> wrote:
>>> This is the USB driver for the Silicon Labs development board.
>>> It contains the Si4713 FM transmitter chip.
>>>
>>
>> I tried this driver again. The system attempts to probe the device but
>> it fails because the product revision read out of the USB device is
>> wrong.
>> [ 220.855158] usb 2-1.3.3: new full-speed USB device number 10 using
>> ehci-pci
>> [ 220.949677] usb 2-1.3.3: New USB device found, idVendor=10c4,
>> idProduct=8244
>> [ 220.949683] usb 2-1.3.3: New USB device strings: Mfr=1, Product=2,
>> SerialNumber=3
>> [ 220.949688] usb 2-1.3.3: Product: Si47xx Baseboard
>> [ 220.949691] usb 2-1.3.3: Manufacturer: SILICON LABORATORIES INC.
>> [ 220.949695] usb 2-1.3.3: SerialNumber: CBDA8-00-0
>> [ 220.950157] usbhid 2-1.3.3:1.0: couldn't find an input interrupt endpoint
>> [ 1014.981012] radio-usb-si4713 2-1.3.3:1.0: Si4713 development board
>> discovered: (10C4:8244)
>> [ 1015.870984] si4713 12-0063: IRQ not configured. Using timeouts.
>> [ 1015.943551] si4713 12-0063: Invalid product number <<< Here is
>> the code without modification
>> [ 1015.943556] si4713 12-0063: Failed to probe device information.
>> [ 1015.943568] si4713: probe of 12-0063 failed with error -22
>> [ 1015.943613] radio-usb-si4713 2-1.3.3:1.0: cannot get v4l2 subdevice
>> [ 1015.943672] usbcore: registered new interface driver radio-usb-si4713
>> [ 1274.419987] perf samples too long (2504 > 2500), lowering
>> kernel.perf_event_max_sample_rate to 50000
>> [ 1308.851059] usbcore: deregistering interface driver radio-usb-si4713
>> [ 1500.478308] radio-usb-si4713 2-1.3.3:1.0: Si4713 development board
>> discovered: (10C4:8244)
>> [ 1500.612240] si4713 12-0063: IRQ not configured. Using timeouts.
>> [ 1500.683489] si4713 12-0063: Invalid product number 0x15 <<< Here it
>> prints the PN read
>> [ 1500.683495] si4713 12-0063: Failed to probe device information.
>> [ 1500.683509] si4713: probe of 12-0063 failed with error -22
>> [ 1500.683558] radio-usb-si4713 2-1.3.3:1.0: cannot get v4l2 subdevice
>> [ 1500.683624] usbcore: registered new interface driver radio-usb-si4713
>>
>> Here is simple diff of what I used to print the PN value:
>> diff --git a/drivers/media/radio/si4713/si4713.c
>> b/drivers/media/radio/si4713/si4713.c
>> index aadecb5..ee53584 100644
>> --- a/drivers/media/radio/si4713/si4713.c
>> +++ b/drivers/media/radio/si4713/si4713.c
>> @@ -464,7 +464,7 @@ static int si4713_checkrev(struct si4713_device *sdev)
>> v4l2_info(&sdev->sd, "chip found @ 0x%02x (%s)\n",
>> client->addr << 1, client->adapter->name);
>> } else {
>> - v4l2_err(&sdev->sd, "Invalid product number\n");
>> + v4l2_err(&sdev->sd, "Invalid product number 0x%X\n",
>> resp[1]);
>> rval = -EINVAL;
>> }
>> return rval;
>>
>> It is expected to be 0x0D instead of 0x15, if I am not mistaken.
>
> What are the markings on the si471x chip on your USB board? Perhaps you have
> a slightly different version of the chip?
>
> A value of 0x15 suggests a si4721 transceiver instead of a si4713 transmitter.
> Which might actually still work with this driver (although with the TX
> functionality only, of course), so you might try accepting the 0x15 value.
>
In fact I have a si4721 board :-(. Sorry for the noise. I am gonna
give it a shot any way by hacking the kernel and allowing it to be
recognized.
> Regards,
>
> Hans
>
>>
>>> Signed-off-by: Dinesh Ram <dinesh....@cern.ch>
>>> ---
>>> drivers/media/radio/si4713/Kconfig | 15 +
>>> drivers/media/radio/si4713/Makefile | 1 +
>>> drivers/media/radio/si4713/radio-usb-si4713.c | 540
>>> +++++++++++++++++++++++++
>>> 3 files changed, 556 insertions(+)
>>> create mode 100644 drivers/media/radio/si4713/radio-usb-si4713.c
>
--
Eduardo Bezerra Valentin
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
