From: Mats Randgaard <matra...@cisco.com>
May also be wrong if the receiver is connected to more than one connector.
Signed-off-by: Mats Randgaard <matra...@cisco.com>
Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
---
drivers/media/i2c/adv7842.c | 4 ----
include/media/adv7842.h | 3 ---
2 files changed, 7 deletions(-)
diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c
index 60f2320..8e75c3b 100644
--- a/drivers/media/i2c/adv7842.c
+++ b/drivers/media/i2c/adv7842.c
@@ -82,7 +82,6 @@ struct adv7842_state {
bool is_cea_format;
struct workqueue_struct *work_queues;
struct delayed_work delayed_work_enable_hotplug;
- bool connector_hdmi;
bool hdmi_port_a;
/* i2c clients */
@@ -2164,8 +2163,6 @@ static int adv7842_cp_log_status(struct v4l2_subdev *sd)
v4l2_info(sd, "-----Chip status-----\n");
v4l2_info(sd, "Chip power: %s\n", no_power(sd) ? "off" : "on");
- v4l2_info(sd, "Connector type: %s\n", state->connector_hdmi ?
- "HDMI" : (is_digital_input(sd) ? "DVI-D" : "DVI-A"));
v4l2_info(sd, "HDMI/DVI-D port selected: %s\n",
state->hdmi_port_a ? "A" : "B");
v4l2_info(sd, "EDID A %s, B %s\n",
@@ -2799,7 +2796,6 @@ static int adv7842_probe(struct i2c_client *client,
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &adv7842_ops);
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
- state->connector_hdmi = pdata->connector_hdmi;
state->mode = pdata->mode;
state->hdmi_port_a = pdata->input == ADV7842_SELECT_HDMI_PORT_A;
diff --git a/include/media/adv7842.h b/include/media/adv7842.h
index c12de2d..24fed11 100644
--- a/include/media/adv7842.h
+++ b/include/media/adv7842.h
@@ -139,9 +139,6 @@ struct adv7842_sdp_io_sync_adjustment {
/* Platform dependent definition */
struct adv7842_platform_data {
- /* connector - HDMI or DVI? */
- unsigned connector_hdmi:1;
-
/* chip reset during probe */
unsigned chip_reset:1;
--
1.8.4.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
