Em Sun, 05 Jan 2014 12:03:51 +0100
Frank Schäfer <fschaefer....@googlemail.com> escreveu:
> Am 04.01.2014 11:55, schrieb Mauro Carvalho Chehab:
> > The I2C wait completion/timeout logic currently assumes that
> > msleep(5) will wait exaclty 5 ms. This is not true at all,
> > as it depends on CONFIG_HZ.
> >
> > Convert it to use jiffies, in order to not wait for more time
> > than needed.
> >
> > Signed-off-by: Mauro Carvalho Chehab <m.che...@samsung.com>
> > ---
> > drivers/media/usb/em28xx/em28xx-i2c.c | 65
> > ++++++++++++++++++-----------------
> > 1 file changed, 34 insertions(+), 31 deletions(-)
> >
> > diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c
> > b/drivers/media/usb/em28xx/em28xx-i2c.c
> > index 9e6a11d01858..9fa7ed51e5b1 100644
> > --- a/drivers/media/usb/em28xx/em28xx-i2c.c
> > +++ b/drivers/media/usb/em28xx/em28xx-i2c.c
> > @@ -26,6 +26,7 @@
> > #include <linux/kernel.h>
> > #include <linux/usb.h>
> > #include <linux/i2c.h>
> > +#include <linux/jiffies.h>
> >
> > #include "em28xx.h"
> > #include "tuner-xc2028.h"
> > @@ -48,8 +49,8 @@ MODULE_PARM_DESC(i2c_debug, "enable debug messages
> > [i2c]");
> > */
> > static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16
> > len)
> > {
> > + unsigned long timeout = jiffies +
> > msecs_to_jiffies(EM2800_I2C_XFER_TIMEOUT);
> > int ret;
> > - int write_timeout;
> > u8 b2[6];
> >
> > if (len < 1 || len > 4)
> > @@ -74,15 +75,15 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8
> > addr, u8 *buf, u16 len)
> > return (ret < 0) ? ret : -EIO;
> > }
> > /* wait for completion */
> > - for (write_timeout = EM2800_I2C_XFER_TIMEOUT; write_timeout > 0;
> > - write_timeout -= 5) {
> > + while (time_is_after_jiffies(timeout)) {
> AFAIU, it must be time_is_before_jiffies(timeout).
This is tricky, but it is right.
See its description at jiffies.h:
/* time_is_after_jiffies(a) return true if a is after jiffies */
#define time_is_after_jiffies(a) time_before(jiffies, a)
>
> > ret = dev->em28xx_read_reg(dev, 0x05);
> > - if (ret == 0x80 + len - 1) {
> > + if (ret == 0x80 + len - 1)
> > return len;
> > - } else if (ret == 0x94 + len - 1) {
> > + if (ret == 0x94 + len - 1) {
> > em28xx_warn("R05 returned 0x%02x: I2C timeout", ret);
> > return -ENODEV;
> > - } else if (ret < 0) {
> > + }
> > + if (ret < 0) {
> > em28xx_warn("failed to get i2c transfer status from
> > bridge register (error=%i)\n",
> > ret);
> > return ret;
> > @@ -99,9 +100,9 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8
> > addr, u8 *buf, u16 len)
> > */
> > static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16
> > len)
> > {
> > + unsigned long timeout = jiffies +
> > msecs_to_jiffies(EM2800_I2C_XFER_TIMEOUT);
> > u8 buf2[4];
> > int ret;
> > - int read_timeout;
> > int i;
> >
> > if (len < 1 || len > 4)
> > @@ -118,15 +119,15 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev,
> > u8 addr, u8 *buf, u16 len)
> > }
> >
> > /* wait for completion */
> > - for (read_timeout = EM2800_I2C_XFER_TIMEOUT; read_timeout > 0;
> > - read_timeout -= 5) {
> > + while (time_is_after_jiffies(timeout)) {
> The same here...
>
> > ret = dev->em28xx_read_reg(dev, 0x05);
> > - if (ret == 0x84 + len - 1) {
> > + if (ret == 0x84 + len - 1)
> > break;
> > - } else if (ret == 0x94 + len - 1) {
> > + if (ret == 0x94 + len - 1) {
> > em28xx_warn("R05 returned 0x%02x: I2C timeout", ret);
> > return -ENODEV;
> > - } else if (ret < 0) {
> > + }
> > + if (ret < 0) {
> > em28xx_warn("failed to get i2c transfer status from
> > bridge register (error=%i)\n",
> > ret);
> > return ret;
> > @@ -170,7 +171,8 @@ static int em2800_i2c_check_for_device(struct em28xx
> > *dev, u8 addr)
> > static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
> > u16 len, int stop)
> > {
> > - int write_timeout, ret;
> > + unsigned long timeout = jiffies +
> > msecs_to_jiffies(EM2800_I2C_XFER_TIMEOUT);
> > + int ret;
> >
> > if (len < 1 || len > 64)
> > return -EOPNOTSUPP;
> > @@ -193,17 +195,18 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev,
> > u16 addr, u8 *buf,
> > }
> > }
> >
> > - /* Check success of the i2c operation */
> > - for (write_timeout = EM2800_I2C_XFER_TIMEOUT; write_timeout > 0;
> > - write_timeout -= 5) {
> > + /* wait for completion */
> > + while (time_is_after_jiffies(timeout)) {
> ... and here.
>
> > ret = dev->em28xx_read_reg(dev, 0x05);
> > - if (ret == 0) { /* success */
> > + if (ret == 0) /* success */
> > return len;
> > - } else if (ret == 0x10) {
> > - em28xx_warn("I2C transfer timeout on writing to addr
> > 0x%02x", addr);
> > + if (ret == 0x10) {
> > + em28xx_warn("I2C transfer timeout on writing to addr
> > 0x%02x",
> > + addr);
> > return -ENODEV;
> > - } else if (ret < 0) {
> > - em28xx_warn("failed to read i2c transfer status from
> > bridge (error=%i)\n",
> > + }
> > + if (ret < 0) {
> > + em28xx_warn("failed to get i2c transfer status from
> > bridge register (error=%i)\n",
> > ret);
> > return ret;
> > }
> > @@ -214,6 +217,7 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev,
> > u16 addr, u8 *buf,
> > * (even with high payload) ...
> > */
> > }
> > +
> > em28xx_warn("write to i2c device at 0x%x timed out\n", addr);
> > return -EIO;
> > }
> > @@ -251,21 +255,20 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev,
> > u16 addr, u8 *buf, u16 len)
> >
> > /* Check success of the i2c operation */
> > ret = dev->em28xx_read_reg(dev, 0x05);
> > + if (ret == 0) /* success */
> > + return len;
> > if (ret < 0) {
> > - em28xx_warn("failed to read i2c transfer status from bridge
> > (error=%i)\n",
> > + em28xx_warn("failed to get i2c transfer status from bridge
> > register (error=%i)\n",
> > ret);
> > return ret;
> > }
> > - if (ret > 0) {
> > - if (ret == 0x10) {
> > - em28xx_warn("I2C transfer timeout on read from addr
> > 0x%02x", addr);
> > - return -ENODEV;
> > - } else {
> > - em28xx_warn("unknown i2c error (status=%i)\n", ret);
> > - return -EIO;
> > - }
> > + if (ret == 0x10) {
> > + em28xx_warn("I2C transfer timeout on read from addr 0x%02x",
> > addr);
> > + return -ENODEV;
> > }
> > - return len;
> > +
> > + em28xx_warn("unknown i2c error (status=%i)\n", ret);
> > + return -EIO;
> > }
> >
> > /*
>
--
Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
