On Wed, Jan 22, 2014 at 05:46:28PM +0200, Antti Seppälä wrote: > On 21 January 2014 14:28, Sean Young <s...@mess.org> wrote: > > On Mon, Jan 20, 2014 at 09:39:43PM +0200, Antti Seppälä wrote: > >> This patch series introduces a simple sysfs file interface for reading > >> and writing wakeup scancodes to rc drivers. > >> > >> This is an improved version of my previous patch for nuvoton-cir which > >> did the same thing via module parameters. This is a more generic > >> approach allowing other drivers to utilize the interface as well. > >> > >> I did not port winbond-cir to this method of wakeup scancode setting yet > >> because I don't have the hardware to test it and I wanted first to get > >> some comments about how the patch series looks. I did however write a > >> simple support to read and write scancodes to rc-loopback module. > > > > Doesn't the nuvoton-cir driver need to know the IR protocol for wakeup? > > > > This is needed for winbond-cir; I guess this should be another sysfs > > file, something like "wakeup_protocol". Even if the nuvoton can only > > handle one IR protocol, maybe it should be exported (readonly) via > > sysfs? > > > > I'm happy to help with a winbond-cir implementation; I have the hardware. > > > > > > Sean > > Nuvoton-cir doesn't care about the IR protocol because the hardware > compares raw IR pulse lengths and wakes the system if received pulse > is within certain tolerance of the one pre-programmed to the HW. This > approach is agnostic to the used IR protocol.
Your patch talks about scancodes which is something entirely different. This should be renamed to something better. So with the nuvoton you program a set of pulses and spaces; with the winbond you set the protocol and the scancode. I don't think there is any shared code here. Maybe it's better to implement the wakeup sysfs files in the drivers themselves rather than in rcdev, I guess that depends on whether there are other devices that implement similar functionality. Sean > I glanced over the winbond-cir driver and porting the driver to use > sysfs for wakeup scancodes looks doable. Also a new sysfs entry for > setting the wakeup protocol would indeed be needed... I will take a > closer look at this when I have some more time. > > -Antti > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html