On Mon, Mar 3, 2014 at 5:05 AM, Mauro Carvalho Chehab <m.che...@samsung.com> wrote: > This patch series finally merge a long waited driver, for Micronas/Trident > DRX-J ATSC frontends. > > It is based on a previous work from Devin, who made the original port > of the Trident driver and got license to ship the firmware. > > Latter, it got some attention from Patrick that tried to upstream it. > > However, this driver had very serious issues, and didn't fit into Linux > Kernel code quality standards. > > So, I made some patches, back in 2012, in order to try helping to get > this driver merged, but, as I didn't have the device, and Patrick never > sent a final tested version, the patches got hibernated for a long time. > > Finally, this year, I got one hardware for me, and one for Shuah, as > she offered her help to fix suspend/resume issues at the subsystem. > > This series is a result of this work: the driver got major cleanups, > and several relevant bug fixes. The most serious one is that the > device was not fully initializing the struct that was enabling the > MPEG output. Worse than that, the routine that was setting the MPEG > output was also rewriting the default values for a dirty set. > > The type of output was also wrong: on this board, PCTV 80e is wired > for serial MPEG transfer, but the driver was initialized to parallel. > > All those bugs got fixed, and, at least on my tests with a PCTV > 80e model 01134, the device is now properly working. > > Not sure if all patches will arrive the ML, as there are some very big > ones here that could be biger than VGER's max limit for posts. > > Anyway, all patches can be found at: > > http://git.linuxtv.org/mchehab/experimental.git/shortlog/refs/heads/drx-j-v3 > > Have fun! > Mauro > > Devin Heitmueller (2): > [media] drx-j: add a driver for Trident drx-j frontend > [media] drx-j: put under 3-clause BSD license > > Mauro Carvalho Chehab (74): > [media] drx-j: CodingStyle fixes > [media] drx-j: Fix compilation and un-comment it > [media] drx-j: Fix CodingStyle > [media] drx-j: get rid of the typedefs on bsp_i2c.h > [media] drx-j: remove the "const" annotate on HICommand() > [media] drx-j: get rid of the integer typedefs > [media] drx-j: get rid of the other typedefs at bsp_types.h > [media] drx-j: get rid of the bsp*.h headers > [media] drx-j: get rid of most of the typedefs > [media] drx-j: fix whitespacing on pointer parmameters > [media] drx-j: Use checkpatch --fix to solve several issues > [media] drx-j: Don't use CamelCase > [media] drx-j: do more CodingStyle fixes > [media] drx-j: remove the unused tuner_i2c_write_read() function > [media] drx-j: Remove a bunch of unused but assigned vars > [media] drx-j: Some minor CodingStyle fixes at headers > [media] drx-j: make a few functions static > [media] drx-j: Get rid of drx39xyj/bsp_tuner.h > [media] drx-j: get rid of typedefs in drx_driver.h > [media] drx-j: Get rid of typedefs on drxh.h > [media] drx-j: a few more CodingStyle fixups > [media] drx-j: Don't use buffer if an error occurs > [media] drx-j: replace the ugly CHK_ERROR() macro > [media] drx-j: don't use parenthesis on return > [media] drx-j: Simplify logic expressions > [media] drx-j: More CamelCase fixups > [media] drx-j: Remove typedefs in drxj.c > [media] drx-j: CodingStyle fixups on drxj.c > [media] drx-j: Use the Linux error codes > [media] drx-j: Replace printk's by pr_foo() > [media] drx-j: get rid of some ugly macros > [media] drx-j: remove typedefs at drx_driver.c > [media] drx-j: remove drxj_options.h > [media] drx-j: make checkpatch.pl happy > [media] drx-j: remove the useless microcode_size > [media] drx-j: Fix release and error path on drx39xxj.c > [media] drx-j: Be sure that all allocated data are properly initialized > [media] drx-j: dynamically load the firmware > [media] drx-j: Split firmware size check from the main routine > [media] em28xx: add support for PCTV 80e remote controller > [media] drx-j: remove unused code from drx_driver.c > [media] drx-j: get rid of its own be??_to_cpu() implementation > [media] drx-j: reset the DVB scan configuration at powerup > [media] drx-j: Allow standard selection > [media] drx-j: Some cleanups at drx_driver.c source > [media] drx-j: prepend function names with drx_ at drx_driver.c > [media] drx-j: get rid of drx_driver.c > [media] drx-j: Avoid any regressions by preserving old behavior > [media] drx-j: Remove duplicated firmware upload code > [media] drx-j: get rid of drx_ctrl > [media] drx-j: get rid of the remaining drx generic functions > [media] drx-j: move drx39xxj into drxj.c > [media] drx-j: get rid of drxj_ctrl() > [media] drx-j: comment or remove unused code > [media] drx-j: remove some ugly bindings from drx39xxj_dummy.c > [media] drx-j: get rid of tuner dummy get/set frequency > [media] drx-j: be sure to use tuner's IF > [media] drx-j: avoid calling power_down_foo twice > [media] drx-j: call ctrl_set_standard even if a standard is powered > [media] drx-j: use the proper timeout code on scu_command > [media] drx-j: remove some unused data > [media] drx-j: Fix qam/256 mode > [media] drx-j: Get rid of I2C protocol version > [media] drx-j: get rid of function prototypes at drx_dap_fasi.c > [media] drx-j: get rid of drx_dap_fasi.c > [media] drx-j: get rid of struct drx_dap_fasi_funct_g > [media] drx-j: get rid of function wrappers > [media] drx-j: Allow userspace control of LNA > [media] drx-j: Use single master mode > [media] drx-j: be sure to send the powerup command at device open > [media] drx-j: be sure to do a full software reset > [media] drx-j: disable OOB > [media] drx-j: Properly initialize mpeg struct before using it > [media] drx-j: set it to serial mode by default > > Shuah Khan (3): > [media] drx-j: fix pr_dbg undefined compile errors when DJH_DEBUG is defined > [media] drx-j: remove return that prevents DJH_DEBUG code to run > [media] drx-j: fix boot failure due to null pointer dereference > > Documentation/video4linux/CARDLIST.em28xx | 1 + > drivers/media/dvb-frontends/Kconfig | 2 + > drivers/media/dvb-frontends/Makefile | 1 + > drivers/media/dvb-frontends/drx39xyj/Kconfig | 7 + > drivers/media/dvb-frontends/drx39xyj/Makefile | 6 + > drivers/media/dvb-frontends/drx39xyj/bsp_i2c.h | 139 + > drivers/media/dvb-frontends/drx39xyj/drx39xxj.h | 39 + > .../media/dvb-frontends/drx39xyj/drx_dap_fasi.h | 256 + > drivers/media/dvb-frontends/drx39xyj/drx_driver.h | 2367 +++ > .../dvb-frontends/drx39xyj/drx_driver_version.h | 72 + > drivers/media/dvb-frontends/drx39xyj/drxj.c | 20867 > +++++++++++++++++++ > drivers/media/dvb-frontends/drx39xyj/drxj.h | 680 + > drivers/media/dvb-frontends/drx39xyj/drxj_map.h | 15055 +++++++++++++ > drivers/media/usb/em28xx/Kconfig | 1 + > drivers/media/usb/em28xx/em28xx-cards.c | 21 + > drivers/media/usb/em28xx/em28xx-dvb.c | 27 + > drivers/media/usb/em28xx/em28xx.h | 1 + > 17 files changed, 39542 insertions(+) > create mode 100644 drivers/media/dvb-frontends/drx39xyj/Kconfig > create mode 100644 drivers/media/dvb-frontends/drx39xyj/Makefile > create mode 100644 drivers/media/dvb-frontends/drx39xyj/bsp_i2c.h > create mode 100644 drivers/media/dvb-frontends/drx39xyj/drx39xxj.h > create mode 100644 drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h > create mode 100644 drivers/media/dvb-frontends/drx39xyj/drx_driver.h > create mode 100644 drivers/media/dvb-frontends/drx39xyj/drx_driver_version.h > create mode 100644 drivers/media/dvb-frontends/drx39xyj/drxj.c > create mode 100644 drivers/media/dvb-frontends/drx39xyj/drxj.h > create mode 100644 drivers/media/dvb-frontends/drx39xyj/drxj_map.h > > -- > 1.8.5.3 >
Acked-by: Devin Heitmueller <dheitmuel...@kernellabs.com> -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html