On Friday 28 March 2014 01:08:56 David Härdeman wrote: > On Thu, Mar 27, 2014 at 11:21:23PM +0000, James Hogan wrote: > >Hi David, > > > >On Thursday 27 March 2014 22:00:37 David Härdeman wrote: > >> This reverts 18bc17448147e93f31cc9b1a83be49f1224657b2 > >> > >> The patch ignores the fact that NEC32 scancodes are generated not only in > >> the NEC raw decoder but also directly in some drivers. Whichever approach > >> is chosen it should be consistent across drivers and this patch needs > >> more > >> discussion. > > > >Fair enough. For reference which drivers are you referring to? > > The ones I'm aware of right now are:
Thanks, I hadn't looked properly outside of drivers/media/rc/ :( > drivers/media/usb/dvb-usb/dib0700_core.c AFAICT this only seems to support 16bit and 24bit NEC, so NEC-32 doesn't affect it. I may have missed something subtle. > drivers/media/usb/dvb-usb-v2/az6007.c > drivers/media/usb/dvb-usb-v2/af9035.c > drivers/media/usb/dvb-usb-v2/rtl28xxu.c > drivers/media/usb/dvb-usb-v2/af9015.c > drivers/media/usb/em28xx/em28xx-input.c Note, it appears none of these do any bit reversing for the 32bit case compared to 16/24 bit, so they're already different to the NEC32 scancode encoding that the raw nec decoder and tivo keymap were using, which used a different bitorder (!!) between the 32-bit and the 24/16-bit cases. > > >> Furthermore, I'm convinced that we have to stop playing games trying to > >> decipher the "meaning" of NEC scancodes (what's the > >> customer/vendor/address, which byte is the MSB, etc). > > > >Well when all the buttons on a remote have the same address, and the > >numeric buttons are sequential commands only in a certain bit/byte order, > >then I think the word "decipher" is probably a bit of a stretch. > > I think you misunderstood me. "decipher" is a bit of a stretch when > talking of one remote control (I'm guessing you're referring to the Tivo > remote). It's not that much of a stretch if we're referring to trying to > derive a common meaning from the encoding used for *all* remote controls > out there. > > The discussion about the 24-bit version of NEC and whether the address > bytes were in MSB or LSB order was a good example. Andy Walls cited a > NEC manual which stated one thing and people also referred to > http://www.sbprojects.com/knowledge/ir/nec.php which stated the opposite > (while referring to an unnamed VCR service manual). > > As a third example...I've read a Samsung service manual which happily > stated that the remote (which used the NEC protocol) sent IR commands > starting with the address x 2 (and looking at the raw NEC command, it > did start with something like 0x07 0x07). > > So don't get me wrong, I wasn't referring to your analysis of the Tivo > remote but more the general approach that has been taken until now wrt. > the NEC protocol in the kernel drivers. Okay, thanks for the clarification. > > >Nevertheless I don't have any attachment to 32-bit NEC. If it's likely to > >change again I'd prefer img-ir-nec just not support it for now, so please > >could you add the following hunks to your patch (or if the original patch > >is > >to be dropped this could be squashed into the img-ir-nec patch): > I'd rather show you my complete proposal first before doing something > radical with your driver. But it was a good reminder that I need to keep > the NEC32 parsing in your driver in mind as well. Okay no problem. I had assumed you were aiming for a short term fix to prevent the encoding change hitting mainline or an actual release (v3.15). Cheers James > > >> I'll post separate proposals to that effect later. > > > >Great, please do Cc me > > > >(I have a work in progress branch to unify NEC scancodes, but I'm not sure > >I'd have time to complete it any time soon anyway) > > That is what I'm working on as well at the moment. It's actually to > solve two problems...both to unify NEC scancodes (by simply using 32 bit > scancodes everywhere and some fallback code...I'm not 100% sure it's > doable but I hope so since it's the only sane solution I can think of in > the long run)...and to make sure that protocol information actually gets > used in keymaps, etc. > > I hope to post patches soon that'll make it clearer. > > Regards, > David > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
signature.asc
Description: This is a digitally signed message part.