On 04/07/2014 07:11 AM, Pawel Osciak wrote:
> On Tue, Mar 11, 2014 at 6:20 AM, Hans Verkuil <hverk...@xs4all.nl> wrote:
>> From: Hans Verkuil <hans.verk...@cisco.com>
>>
>> The videobuf2-core did not zero the reserved array of v4l2_plane as it
>> should.
>>
>> More serious is the fact that data_offset was not handled correctly:
>>
>> - for capture devices it was never zeroed, which meant that it was
>> uninitialized. Unless the driver sets it it was a completely random
>> number.
>>
>> - __qbuf_dmabuf had a completely incorrect length check that included
>> data_offset.
>>
>> - in the single-planar case data_offset was never correctly set to 0.
>> The single-planar API doesn't support data_offset, so setting it
>> to 0 is the right thing to do.
>>
>> All these issues were found with v4l2-compliance.
>>
>> Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
>> ---
>> drivers/media/v4l2-core/videobuf2-core.c | 19 ++++++++++---------
>> 1 file changed, 10 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/media/v4l2-core/videobuf2-core.c
>> b/drivers/media/v4l2-core/videobuf2-core.c
>> index f9059bb..1a09442 100644
>> --- a/drivers/media/v4l2-core/videobuf2-core.c
>> +++ b/drivers/media/v4l2-core/videobuf2-core.c
>> @@ -1141,6 +1141,12 @@ static void __fill_vb2_buffer(struct vb2_buffer *vb,
>> const struct v4l2_buffer *b
>> unsigned int plane;
>>
>> if (V4L2_TYPE_IS_MULTIPLANAR(b->type)) {
>> + for (plane = 0; plane < vb->num_planes; ++plane) {
>> + memset(v4l2_planes[plane].reserved, 0,
>> + sizeof(v4l2_planes[plane].reserved));
>> + v4l2_planes[plane].data_offset = 0;
>> + }
>> +
>
> Perhaps we should just memset the whole v4l2_planes array to 0 over
> all elements (ARRAY_SIZE)?
You can't do that here since in the mmap case the v4l2_planes array has already
fields filled in. However, by doing a memset in __qbuf_userptr and
__qbuf_dmabuf,
before calling __fill_vb2_buffer, this can be solved neatly and correctly.
> Also I would extract this above the if and zero out everything for
> both multi and singleplanar.
> You shouldn't need to zero it out below then.
>
>> /* Fill in driver-provided information for OUTPUT types */
>> if (V4L2_TYPE_IS_OUTPUT(b->type)) {
>> /*
>> @@ -1169,8 +1175,6 @@ static void __fill_vb2_buffer(struct vb2_buffer *vb,
>> const struct v4l2_buffer *b
>> b->m.planes[plane].m.fd;
>> v4l2_planes[plane].length =
>> b->m.planes[plane].length;
>> - v4l2_planes[plane].data_offset =
>> - b->m.planes[plane].data_offset;
I've added an explicit explanation for this change to the commit log as
well:
- in __fill_vb2_buffer in the DMABUF case the data_offset field was
unconditionally copied from v4l2_buffer to v4l2_plane when this
should only happen in the output case.
Regards,
Hans
>> }
>> }
>> } else {
>> @@ -1180,10 +1184,10 @@ static void __fill_vb2_buffer(struct vb2_buffer *vb,
>> const struct v4l2_buffer *b
>> * In videobuf we use our internal V4l2_planes struct for
>> * single-planar buffers as well, for simplicity.
>> */
>> - if (V4L2_TYPE_IS_OUTPUT(b->type)) {
>> + if (V4L2_TYPE_IS_OUTPUT(b->type))
>> v4l2_planes[0].bytesused = b->bytesused;
>> - v4l2_planes[0].data_offset = 0;
>> - }
>> + /* Single-planar buffers never use data_offset */
>> + v4l2_planes[0].data_offset = 0;
>>
>> if (b->memory == V4L2_MEMORY_USERPTR) {
>> v4l2_planes[0].m.userptr = b->m.userptr;
>> @@ -1193,9 +1197,7 @@ static void __fill_vb2_buffer(struct vb2_buffer *vb,
>> const struct v4l2_buffer *b
>> if (b->memory == V4L2_MEMORY_DMABUF) {
>> v4l2_planes[0].m.fd = b->m.fd;
>> v4l2_planes[0].length = b->length;
>> - v4l2_planes[0].data_offset = 0;
>> }
>> -
>> }
>>
>> /* Zero flags that the vb2 core handles */
>> @@ -1374,8 +1376,7 @@ static int __qbuf_dmabuf(struct vb2_buffer *vb, const
>> struct v4l2_buffer *b)
>> if (planes[plane].length == 0)
>> planes[plane].length = dbuf->size;
>>
>> - if (planes[plane].length < planes[plane].data_offset +
>> - q->plane_sizes[plane]) {
>> + if (planes[plane].length < q->plane_sizes[plane]) {
>
> Good catch!
>
>> dprintk(1, "qbuf: invalid dmabuf length for plane
>> %d\n",
>> plane);
>> ret = -EINVAL;
>> --
>> 1.9.0
>>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
