Em Wed, 16 Apr 2014 17:51:21 +0900 Sat <satt...@aim.com> escreveu: > Hi Roberto, > > Did you check if the device id of your tuner is included in smsusb.c? > id can be gotten by lsusb command. > > Thanks, > Satoshi > > (2014/04/16 8:28), Roberto Alcantara wrote: > > Guys, > > > > I’m trying enable Siano SMS2270 ISDB-T tuner in development board with > > Allwinner A20 SoC. > > > > I recompiled kernel with modules I can load them but something seems wrong. > > After insert USB Sms2270 dongle I only see: > > > > Jan 1 00:15:20 awsom kernel: [ 922.645502] usb 1-1.4: new high-speed USB > > device number 6 using sw-ehci > > Jan 1 00:15:20 awsom mtp-probe: checking bus 1, device 6: > > "/sys/devices/platform/sw-ehci.1/usb1/1-1/1-1.4" > > Jan 1 00:15:20 awsom mtp-probe: bus: 1, device: 6 was not an MTP device > > > > and no more logs. > > > > smsusb was loaded with debug=2. > > > > The usb dongle is plugged on usb powered hub and other devices like > > keyboard are working fine with this hub port. > > > > What I missing here? Thanks for all tips ! :-)
I suspect that it is trying to load this device via smsdio driver, but I'm not sure. Those MTP probe messages look weird to me. I suspect that it didn't even called the USB probing method for this device, but I'm not a MTP expert. Regards, Mauro > > > > Best regards, > > - Roberto > > > > > > root@awsom:/home/linaro# lsmod > > Module Size Used by > > sunxi_cedar_mod 10284 0 > > smsdvb 13909 0 > > smsusb 8936 0 > > smsmdtv 28266 2 smsdvb,smsusb > > disp_ump 854 0 > > mali_drm 2638 1 > > mali 113459 0 > > ump 56392 4 disp_ump,mali > > lcd 3646 0 > > > > root@awsom:/home/linaro# lsusb > > Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > Bus 001 Device 003: ID 0e8f:0021 GreenAsia Inc. Multimedia Keyboard > > Controller > > Bus 001 Device 004: ID 187f:0600 Siano Mobile Silicon > > > > root@awsom:/home/linaro# uname -a > > Linux awsom 3.4.75.sun7i_CRAFF+ #4 SMP PREEMPT Thu Apr 10 01:17:47 BRT 2014 > > armv7l armv7l armv7l GNU/Linux > > > > > > > > > > root@awsom:/home/linaro# lsusb -v > > > > Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub > > Device Descriptor: > > bLength 18 > > bDescriptorType 1 > > bcdUSB 2.00 > > bDeviceClass 9 Hub > > bDeviceSubClass 0 Unused > > bDeviceProtocol 1 Single TT > > bMaxPacketSize0 64 > > idVendor 0x058f Alcor Micro Corp. > > idProduct 0x6254 USB Hub > > bcdDevice 1.00 > > iManufacturer 0 > > iProduct 1 USB2.0Hub > > iSerial 0 > > bNumConfigurations 1 > > Configuration Descriptor: > > bLength 9 > > bDescriptorType 2 > > wTotalLength 25 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 > > bmAttributes 0xe0 > > Self Powered > > Remote Wakeup > > MaxPower 100mA > > Interface Descriptor: > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 1 > > bInterfaceClass 9 Hub > > bInterfaceSubClass 0 Unused > > bInterfaceProtocol 0 Full speed (or root) hub > > iInterface 0 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 EP 1 IN > > bmAttributes 3 > > Transfer Type Interrupt > > Synch Type None > > Usage Type Data > > wMaxPacketSize 0x0001 1x 1 bytes > > bInterval 12 > > Hub Descriptor: > > bLength 9 > > bDescriptorType 41 > > nNbrPorts 4 > > wHubCharacteristic 0x0080 > > Ganged power switching > > Ganged overcurrent protection > > TT think time 8 FS bits > > Port indicators > > bPwrOn2PwrGood 50 * 2 milli seconds > > bHubContrCurrent 100 milli Ampere > > DeviceRemovable 0x00 > > PortPwrCtrlMask 0xff > > Hub Port Status: > > Port 1: 0000.0303 lowspeed power enable connect > > Port 2: 0000.0100 power > > Port 3: 0000.0100 power > > Port 4: 0000.0503 highspeed power enable connect > > Device Qualifier (for other device speed): > > bLength 10 > > bDescriptorType 6 > > bcdUSB 2.00 > > bDeviceClass 9 Hub > > bDeviceSubClass 0 Unused > > bDeviceProtocol 0 Full speed (or root) hub > > bMaxPacketSize0 64 > > bNumConfigurations 1 > > Device Status: 0x0001 > > Self Powered > > > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > Device Descriptor: > > bLength 18 > > bDescriptorType 1 > > bcdUSB 2.00 > > bDeviceClass 9 Hub > > bDeviceSubClass 0 Unused > > bDeviceProtocol 0 Full speed (or root) hub > > bMaxPacketSize0 64 > > idVendor 0x1d6b Linux Foundation > > idProduct 0x0002 2.0 root hub > > bcdDevice 3.04 > > iManufacturer 3 Linux 3.4.75.sun7i_CRAFF+ ehci_hcd > > iProduct 2 SW USB2.0 'Enhanced' Host Controller (EHCI) > > Driver > > iSerial 1 sw-ehci > > bNumConfigurations 1 > > Configuration Descriptor: > > bLength 9 > > bDescriptorType 2 > > wTotalLength 25 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 > > bmAttributes 0xe0 > > Self Powered > > Remote Wakeup > > MaxPower 0mA > > Interface Descriptor: > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 1 > > bInterfaceClass 9 Hub > > bInterfaceSubClass 0 Unused > > bInterfaceProtocol 0 Full speed (or root) hub > > iInterface 0 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 EP 1 IN > > bmAttributes 3 > > Transfer Type Interrupt > > Synch Type None > > Usage Type Data > > wMaxPacketSize 0x0004 1x 4 bytes > > bInterval 12 > > Hub Descriptor: > > bLength 9 > > bDescriptorType 41 > > nNbrPorts 1 > > wHubCharacteristic 0x000a > > No power switching (usb 1.0) > > Per-port overcurrent protection > > bPwrOn2PwrGood 10 * 2 milli seconds > > bHubContrCurrent 0 milli Ampere > > DeviceRemovable 0x00 > > PortPwrCtrlMask 0xff > > Hub Port Status: > > Port 1: 0000.0503 highspeed power enable connect > > Device Status: 0x0001 > > Self Powered > > > > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > Device Descriptor: > > bLength 18 > > bDescriptorType 1 > > bcdUSB 1.10 > > bDeviceClass 9 Hub > > bDeviceSubClass 0 Unused > > bDeviceProtocol 0 Full speed (or root) hub > > bMaxPacketSize0 64 > > idVendor 0x1d6b Linux Foundation > > idProduct 0x0001 1.1 root hub > > bcdDevice 3.04 > > iManufacturer 3 Linux 3.4.75.sun7i_CRAFF+ ohci_hcd > > iProduct 2 SW USB2.0 'Open' Host Controller (OHCI) Driver > > iSerial 1 sw-ohci > > bNumConfigurations 1 > > Configuration Descriptor: > > bLength 9 > > bDescriptorType 2 > > wTotalLength 25 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 > > bmAttributes 0xe0 > > Self Powered > > Remote Wakeup > > MaxPower 0mA > > Interface Descriptor: > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 1 > > bInterfaceClass 9 Hub > > bInterfaceSubClass 0 Unused > > bInterfaceProtocol 0 Full speed (or root) hub > > iInterface 0 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 EP 1 IN > > bmAttributes 3 > > Transfer Type Interrupt > > Synch Type None > > Usage Type Data > > wMaxPacketSize 0x0002 1x 2 bytes > > bInterval 255 > > Hub Descriptor: > > bLength 9 > > bDescriptorType 41 > > nNbrPorts 1 > > wHubCharacteristic 0x0012 > > No power switching (usb 1.0) > > No overcurrent protection > > bPwrOn2PwrGood 2 * 2 milli seconds > > bHubContrCurrent 0 milli Ampere > > DeviceRemovable 0x00 > > PortPwrCtrlMask 0xff > > Hub Port Status: > > Port 1: 0000.0100 power > > Device Status: 0x0001 > > Self Powered > > > > Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > Device Descriptor: > > bLength 18 > > bDescriptorType 1 > > bcdUSB 2.00 > > bDeviceClass 9 Hub > > bDeviceSubClass 0 Unused > > bDeviceProtocol 0 Full speed (or root) hub > > bMaxPacketSize0 64 > > idVendor 0x1d6b Linux Foundation > > idProduct 0x0002 2.0 root hub > > bcdDevice 3.04 > > iManufacturer 3 Linux 3.4.75.sun7i_CRAFF+ ehci_hcd > > iProduct 2 SW USB2.0 'Enhanced' Host Controller (EHCI) > > Driver > > iSerial 1 sw-ehci > > bNumConfigurations 1 > > Configuration Descriptor: > > bLength 9 > > bDescriptorType 2 > > wTotalLength 25 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 > > bmAttributes 0xe0 > > Self Powered > > Remote Wakeup > > MaxPower 0mA > > Interface Descriptor: > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 1 > > bInterfaceClass 9 Hub > > bInterfaceSubClass 0 Unused > > bInterfaceProtocol 0 Full speed (or root) hub > > iInterface 0 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 EP 1 IN > > bmAttributes 3 > > Transfer Type Interrupt > > Synch Type None > > Usage Type Data > > wMaxPacketSize 0x0004 1x 4 bytes > > bInterval 12 > > Hub Descriptor: > > bLength 9 > > bDescriptorType 41 > > nNbrPorts 1 > > wHubCharacteristic 0x000a > > No power switching (usb 1.0) > > Per-port overcurrent protection > > bPwrOn2PwrGood 10 * 2 milli seconds > > bHubContrCurrent 0 milli Ampere > > DeviceRemovable 0x00 > > PortPwrCtrlMask 0xff > > Hub Port Status: > > Port 1: 0000.0100 power > > Device Status: 0x0001 > > Self Powered > > > > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > Device Descriptor: > > bLength 18 > > bDescriptorType 1 > > bcdUSB 1.10 > > bDeviceClass 9 Hub > > bDeviceSubClass 0 Unused > > bDeviceProtocol 0 Full speed (or root) hub > > bMaxPacketSize0 64 > > idVendor 0x1d6b Linux Foundation > > idProduct 0x0001 1.1 root hub > > bcdDevice 3.04 > > iManufacturer 3 Linux 3.4.75.sun7i_CRAFF+ ohci_hcd > > iProduct 2 SW USB2.0 'Open' Host Controller (OHCI) Driver > > iSerial 1 sw-ohci > > bNumConfigurations 1 > > Configuration Descriptor: > > bLength 9 > > bDescriptorType 2 > > wTotalLength 25 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 > > bmAttributes 0xe0 > > Self Powered > > Remote Wakeup > > MaxPower 0mA > > Interface Descriptor: > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 1 > > bInterfaceClass 9 Hub > > bInterfaceSubClass 0 Unused > > bInterfaceProtocol 0 Full speed (or root) hub > > iInterface 0 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 EP 1 IN > > bmAttributes 3 > > Transfer Type Interrupt > > Synch Type None > > Usage Type Data > > wMaxPacketSize 0x0002 1x 2 bytes > > bInterval 255 > > Hub Descriptor: > > bLength 9 > > bDescriptorType 41 > > nNbrPorts 1 > > wHubCharacteristic 0x0012 > > No power switching (usb 1.0) > > No overcurrent protection > > bPwrOn2PwrGood 2 * 2 milli seconds > > bHubContrCurrent 0 milli Ampere > > DeviceRemovable 0x00 > > PortPwrCtrlMask 0xff > > Hub Port Status: > > Port 1: 0000.0100 power > > Device Status: 0x0001 > > Self Powered > > > > Bus 001 Device 003: ID 0e8f:0021 GreenAsia Inc. Multimedia Keyboard > > Controller > > Device Descriptor: > > bLength 18 > > bDescriptorType 1 > > bcdUSB 1.10 > > bDeviceClass 0 (Defined at Interface level) > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 8 > > idVendor 0x0e8f GreenAsia Inc. > > idProduct 0x0021 Multimedia Keyboard Controller > > bcdDevice 2.07 > > iManufacturer 1 CZW > > iProduct 2 USB Keyboard > > iSerial 0 > > bNumConfigurations 1 > > Configuration Descriptor: > > bLength 9 > > bDescriptorType 2 > > wTotalLength 59 > > bNumInterfaces 2 > > bConfigurationValue 1 > > iConfiguration 0 > > bmAttributes 0xa0 > > (Bus Powered) > > Remote Wakeup > > MaxPower 100mA > > Interface Descriptor: > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 1 > > bInterfaceClass 3 Human Interface Device > > bInterfaceSubClass 1 Boot Interface Subclass > > bInterfaceProtocol 1 Keyboard > > iInterface 0 > > HID Device Descriptor: > > bLength 9 > > bDescriptorType 33 > > bcdHID 1.10 > > bCountryCode 0 Not supported > > bNumDescriptors 1 > > bDescriptorType 34 Report > > wDescriptorLength 62 > > Report Descriptors: > > ** UNAVAILABLE ** > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 EP 1 IN > > bmAttributes 3 > > Transfer Type Interrupt > > Synch Type None > > Usage Type Data > > wMaxPacketSize 0x0008 1x 8 bytes > > bInterval 10 > > Interface Descriptor: > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 1 > > bAlternateSetting 0 > > bNumEndpoints 1 > > bInterfaceClass 3 Human Interface Device > > bInterfaceSubClass 0 No Subclass > > bInterfaceProtocol 0 None > > iInterface 1 CZW > > HID Device Descriptor: > > bLength 9 > > bDescriptorType 33 > > bcdHID 1.10 > > bCountryCode 0 Not supported > > bNumDescriptors 1 > > bDescriptorType 34 Report > > wDescriptorLength 50 > > Report Descriptors: > > ** UNAVAILABLE ** > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x82 EP 2 IN > > bmAttributes 3 > > Transfer Type Interrupt > > Synch Type None > > Usage Type Data > > wMaxPacketSize 0x0008 1x 8 bytes > > bInterval 10 > > Device Status: 0x0000 > > (Bus Powered) > > > > Bus 001 Device 004: ID 187f:0600 Siano Mobile Silicon > > Device Descriptor: > > bLength 18 > > bDescriptorType 1 > > bcdUSB 2.00 > > bDeviceClass 0 (Defined at Interface level) > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 64 > > idVendor 0x187f Siano Mobile Silicon > > idProduct 0x0600 > > bcdDevice 0.08 > > iManufacturer 1 MDTV Receiver > > iProduct 2 MDTV Receiver > > iSerial 0 > > bNumConfigurations 1 > > Configuration Descriptor: > > bLength 9 > > bDescriptorType 2 > > wTotalLength 32 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 > > bmAttributes 0x80 > > (Bus Powered) > > MaxPower 100mA > > Interface Descriptor: > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 2 > > bInterfaceClass 255 Vendor Specific Class > > bInterfaceSubClass 255 Vendor Specific Subclass > > bInterfaceProtocol 255 Vendor Specific Protocol > > iInterface 0 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 EP 1 IN > > bmAttributes 2 > > Transfer Type Bulk > > Synch Type None > > Usage Type Data > > wMaxPacketSize 0x0200 1x 512 bytes > > bInterval 0 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x02 EP 2 OUT > > bmAttributes 2 > > Transfer Type Bulk > > Synch Type None > > Usage Type Data > > wMaxPacketSize 0x0200 1x 512 bytes > > bInterval 0 > > Device Qualifier (for other device speed): > > bLength 10 > > bDescriptorType 6 > > bcdUSB 2.00 > > bDeviceClass 255 Vendor Specific Class > > bDeviceSubClass 255 Vendor Specific Subclass > > bDeviceProtocol 255 Vendor Specific Protocol > > bMaxPacketSize0 64 > > bNumConfigurations 1 > > Device Status: 0x0000 > > (Bus Powered) > > root@awsom:/home/linaro# > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-media" in > > the body of a message to majord...@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Regards, Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
