When extracting multiple bits from a single register read the register
once and extract the bits on the read value.
Signed-off-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verk...@cisco.com>
---
drivers/media/i2c/adv7604.c | 33 ++++++++++++++++++++-------------
1 file changed, 20 insertions(+), 13 deletions(-)
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index da256dd..f9503d2 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -1207,6 +1207,8 @@ static int stdi2dv_timings(struct v4l2_subdev *sd,
static int read_stdi(struct v4l2_subdev *sd, struct stdi_readback *stdi)
{
+ u8 polarity;
+
if (no_lock_stdi(sd) || no_lock_sspd(sd)) {
v4l2_dbg(2, debug, sd, "%s: STDI and/or SSPD not locked\n",
__func__);
return -1;
@@ -1219,11 +1221,12 @@ static int read_stdi(struct v4l2_subdev *sd, struct
stdi_readback *stdi)
stdi->interlaced = io_read(sd, 0x12) & 0x10;
/* read SSPD */
- if ((cp_read(sd, 0xb5) & 0x03) == 0x01) {
- stdi->hs_pol = ((cp_read(sd, 0xb5) & 0x10) ?
- ((cp_read(sd, 0xb5) & 0x08) ? '+' : '-') : 'x');
- stdi->vs_pol = ((cp_read(sd, 0xb5) & 0x40) ?
- ((cp_read(sd, 0xb5) & 0x20) ? '+' : '-') : 'x');
+ polarity = cp_read(sd, 0xb5);
+ if ((polarity & 0x03) == 0x01) {
+ stdi->hs_pol = polarity & 0x10
+ ? (polarity & 0x08 ? '+' : '-') : 'x';
+ stdi->vs_pol = polarity & 0x40
+ ? (polarity & 0x20 ? '+' : '-') : 'x';
} else {
stdi->hs_pol = 'x';
stdi->vs_pol = 'x';
@@ -1881,6 +1884,8 @@ static int adv7604_log_status(struct v4l2_subdev *sd)
struct v4l2_dv_timings timings;
struct stdi_readback stdi;
u8 reg_io_0x02 = io_read(sd, 0x02);
+ u8 edid_enabled;
+ u8 cable_det;
static const char * const csc_coeff_sel_rb[16] = {
"bypassed", "YPbPr601 -> RGB", "reserved", "YPbPr709 -> RGB",
@@ -1910,20 +1915,22 @@ static int adv7604_log_status(struct v4l2_subdev *sd)
v4l2_info(sd, "-----Chip status-----\n");
v4l2_info(sd, "Chip power: %s\n", no_power(sd) ? "off" : "on");
+ edid_enabled = rep_read(sd, 0x7d);
v4l2_info(sd, "EDID enabled port A: %s, B: %s, C: %s, D: %s\n",
- ((rep_read(sd, 0x7d) & 0x01) ? "Yes" : "No"),
- ((rep_read(sd, 0x7d) & 0x02) ? "Yes" : "No"),
- ((rep_read(sd, 0x7d) & 0x04) ? "Yes" : "No"),
- ((rep_read(sd, 0x7d) & 0x08) ? "Yes" : "No"));
+ ((edid_enabled & 0x01) ? "Yes" : "No"),
+ ((edid_enabled & 0x02) ? "Yes" : "No"),
+ ((edid_enabled & 0x04) ? "Yes" : "No"),
+ ((edid_enabled & 0x08) ? "Yes" : "No"));
v4l2_info(sd, "CEC: %s\n", !!(cec_read(sd, 0x2a) & 0x01) ?
"enabled" : "disabled");
v4l2_info(sd, "-----Signal status-----\n");
+ cable_det = io_read(sd, 0x6f);
v4l2_info(sd, "Cable detected (+5V power) port A: %s, B: %s, C: %s, D:
%s\n",
- ((io_read(sd, 0x6f) & 0x10) ? "Yes" : "No"),
- ((io_read(sd, 0x6f) & 0x08) ? "Yes" : "No"),
- ((io_read(sd, 0x6f) & 0x04) ? "Yes" : "No"),
- ((io_read(sd, 0x6f) & 0x02) ? "Yes" : "No"));
+ ((cable_det & 0x10) ? "Yes" : "No"),
+ ((cable_det & 0x08) ? "Yes" : "No"),
+ ((cable_det & 0x04) ? "Yes" : "No"),
+ ((cable_det & 0x02) ? "Yes" : "No"));
v4l2_info(sd, "TMDS signal detected: %s\n",
no_signal_tmds(sd) ? "false" : "true");
v4l2_info(sd, "TMDS signal locked: %s\n",
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
