Hi Hans,
On Tuesday 04 March 2014 11:42:20 Hans Verkuil wrote:
> From: Hans Verkuil <[email protected]>
>
> In commit 02f142ecd24aaf891324ffba8527284c1731b561 support was added to
> start_streaming to return -ENOBUFS if insufficient buffers were queued
> for the DMA engine to start. The vb2 core would attempt calling
> start_streaming again if another buffer would be queued up.
>
> Later analysis uncovered problems with the queue management if
> start_streaming would return an error: the buffers are enqueued to the
> driver before the start_streaming op is called, so after an error they are
> never returned to the vb2 core. The solution for this is to let the driver
> return them to the vb2 core in case of an error while starting the DMA
> engine. However, in the case of -ENOBUFS that would be weird: it is not a
> real error, it just says that more buffers are needed. Requiring
> start_streaming to give them back only to have them requeued again the next
> time the application calls QBUF is inefficient.
>
> This patch changes this mechanism: it adds a 'min_buffers_needed' field
> to vb2_queue that drivers can set with the minimum number of buffers
> required to start the DMA engine. The start_streaming op is only called
> if enough buffers are queued. The -ENOBUFS handling has been dropped in
> favor of this new method.
>
> Drivers are expected to return buffers back to vb2 core with state QUEUED
> if start_streaming would return an error. The vb2 core checks for this
> and produces a warning if that didn't happen and it will forcefully
> reclaim such buffers to ensure that the internal vb2 core state remains
> consistent and all buffer-related resources have been correctly freed
> and all op calls have been balanced.
>
> __reqbufs() has been updated to check that at least min_buffers_needed
> buffers could be allocated. If fewer buffers were allocated then __reqbufs
> will free what was allocated and return -ENOMEM. Based on a suggestion from
> Pawel Osciak.
>
> __create_bufs() doesn't do that check, since the use of __create_bufs
> assumes some advance scenario where the user might want more control.
> Instead streamon will check if enough buffers were allocated to prevent
> streaming with fewer than the minimum required number of buffers.
>
> Signed-off-by: Hans Verkuil <[email protected]>
> ---
> drivers/media/platform/davinci/vpbe_display.c | 6 +-
> drivers/media/platform/davinci/vpif_capture.c | 7 +-
> drivers/media/platform/davinci/vpif_display.c | 7 +-
> drivers/media/platform/s5p-tv/mixer_video.c | 6 +-
> drivers/media/v4l2-core/videobuf2-core.c | 146 ++++++++++++++-------
> drivers/staging/media/davinci_vpfe/vpfe_video.c | 3 +-
> include/media/videobuf2-core.h | 14 ++-
> 7 files changed, 116 insertions(+), 73 deletions(-)
[snip]
> diff --git a/drivers/media/v4l2-core/videobuf2-core.c
> b/drivers/media/v4l2-core/videobuf2-core.c index 07cce7f..1f6eccf 100644
> --- a/drivers/media/v4l2-core/videobuf2-core.c
> +++ b/drivers/media/v4l2-core/videobuf2-core.c
[snip]
> @@ -1890,18 +1939,23 @@ static void __vb2_queue_cancel(struct vb2_queue *q)
> {
> unsigned int i;
>
> - if (q->retry_start_streaming) {
> - q->retry_start_streaming = 0;
> - q->streaming = 0;
> - }
> -
> /*
> * Tell driver to stop all transactions and release all queued
> * buffers.
> */
> - if (q->streaming)
> + if (q->start_streaming_called)
> call_qop(q, stop_streaming, q);
> q->streaming = 0;
> + q->start_streaming_called = 0;
> + q->queued_count = 0;
> +
> + if (WARN_ON(atomic_read(&q->owned_by_drv_count))) {
What's the rationale for a WARN_ON() here ? Wouldn't it simplify drivers to
handle buffer completion inside vb2 when stopping the stream ?
> + for (i = 0; i < q->num_buffers; ++i)
> + if (q->bufs[i]->state == VB2_BUF_STATE_ACTIVE)
> + vb2_buffer_done(q->bufs[i],
> VB2_BUF_STATE_ERROR);
> + /* Must be zero now */
> + WARN_ON(atomic_read(&q->owned_by_drv_count));
> + }
>
> /*
> * Remove all buffers from videobuf's list...
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html