Hi Mauro, I like all of your changes.
Acked-By: Patrick Boettcher <pboettc...@kernellabs.com> regards, Patrick. On Fri, 4 Jul 2014 14:15:26 -0300 Mauro Carvalho Chehab <m.che...@samsung.com> wrote: > While testing two dvb devices: > - Mygica S870 (dib8096 based); > - Pixelview PV-D231U (RN-F) > > I noticed several bugs: > - It doesn't lock on any layer with Interleave > 2; > - It doesn't lock in mode 2 (4 K FFT); > - ADC OFF settings is wrong, with causes wrong ADC > adjustments and cause locking issues; > - the ADC gain table was not right; > - There are some troubles when used with CONFIG_HZ = 1000. > > This patch series addresses the above bugs. While here, it also > improves some debug messages and ad a few other improvements. > > For the patches that change the sleep time, I opted to be > conservative, e. g. to reproduce the worse case (e. g. > CONFIG_HZ = 100), so enforcing that the minimal state machine > delays to be 10ms. That assures that no regression will be > introduced, and that machines configured with HZ equal to > 250, 300 or 1000 will work just like the ones configured with > HZ equal to 100. > > Please notice that the Windows driver for Mygica S870 does a > different setup than what's there at the Linux driver. While > I have a patch changing it, I opted to remove it from this patch > series, as I didn't notice any improvements with the patch here. > Such patch is already in patchwork: > https://patchwork.linuxtv.org/patch/24586/ > and we might resurrect it latter if needed. > > Mauro Carvalho Chehab (14): > dib8000: Fix handling of interleave bigger than 2 > dib8000: Fix ADC OFF settings > dib8000: Fix alignments at dib8000_tune() > dib8000: Fix: add missing 4K mode > dib8000: remove a double call for dib8000_get_symbol_duration() > dib8000: In auto-search, try first with partial reception enabled > dib8000: Restart sad during dib8000_reset > dib0700: better document struct init > dib8000: Fix the sleep time at the state machine > dib0090: Fix the sleep time at the state machine > dib8000: use jifies instead of current_kernel_time() > dib8000: Update the ADC gain table > dib8000: improve debug messages > dib8000: improve the message that reports per-layer locks > > drivers/media/dvb-frontends/dib0090.c | 15 +- > drivers/media/dvb-frontends/dib8000.c | 645 > +++++++++++++++------------- > drivers/media/usb/dvb-usb/dib0700_devices.c | 148 ++++--- 3 files > changed, 436 insertions(+), 372 deletions(-) > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html