Currently the rotator unit is used to copy decoded frames out into buffers
provided by videobuf2. Since the CODA reports the I/P/B frame type of the
last decoded frame, and this frame will be copied out in a later device_run,
depending on display order, we have to store the frame type until such time.
This patch also adds the B-frame type.
Signed-off-by: Philipp Zabel <p.za...@pengutronix.de>
---
drivers/media/platform/coda.c | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)
diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c
index b178379..a7c5ac5 100644
--- a/drivers/media/platform/coda.c
+++ b/drivers/media/platform/coda.c
@@ -209,6 +209,7 @@ struct coda_ctx {
struct coda_aux_buf psbuf;
struct coda_aux_buf slicebuf;
struct coda_aux_buf internal_frames[CODA_MAX_FRAMEBUFFERS];
+ u32 frame_types[CODA_MAX_FRAMEBUFFERS];
struct coda_aux_buf workbuf;
int num_internal_frames;
int idx;
@@ -2693,15 +2694,6 @@ static void coda_finish_decode(struct coda_ctx *ctx)
q_data_dst = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
- val = coda_read(dev, CODA_RET_DEC_PIC_TYPE);
- if ((val & 0x7) == 0) {
- dst_buf->v4l2_buf.flags |= V4L2_BUF_FLAG_KEYFRAME;
- dst_buf->v4l2_buf.flags &= ~V4L2_BUF_FLAG_PFRAME;
- } else {
- dst_buf->v4l2_buf.flags |= V4L2_BUF_FLAG_PFRAME;
- dst_buf->v4l2_buf.flags &= ~V4L2_BUF_FLAG_KEYFRAME;
- }
-
val = coda_read(dev, CODA_RET_DEC_PIC_ERR_MB);
if (val > 0)
v4l2_err(&dev->v4l2_dev,
@@ -2748,6 +2740,14 @@ static void coda_finish_decode(struct coda_ctx *ctx)
} else if (decoded_idx < 0 || decoded_idx >= ctx->num_internal_frames) {
v4l2_err(&dev->v4l2_dev,
"decoded frame index out of range: %d\n", decoded_idx);
+ } else {
+ val = coda_read(dev, CODA_RET_DEC_PIC_TYPE) & 0x7;
+ if (val == 0)
+ ctx->frame_types[decoded_idx] = V4L2_BUF_FLAG_KEYFRAME;
+ else if (val == 1)
+ ctx->frame_types[decoded_idx] = V4L2_BUF_FLAG_PFRAME;
+ else
+ ctx->frame_types[decoded_idx] = V4L2_BUF_FLAG_BFRAME;
}
if (display_idx == -1) {
@@ -2770,6 +2770,11 @@ static void coda_finish_decode(struct coda_ctx *ctx)
dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
dst_buf->v4l2_buf.sequence = ctx->osequence++;
+ dst_buf->v4l2_buf.flags &= ~(V4L2_BUF_FLAG_KEYFRAME |
+ V4L2_BUF_FLAG_PFRAME |
+ V4L2_BUF_FLAG_BFRAME);
+ dst_buf->v4l2_buf.flags |= ctx->frame_types[ctx->display_idx];
+
vb2_set_plane_payload(dst_buf, 0, width * height * 3 / 2);
v4l2_m2m_buf_done(dst_buf, success ? VB2_BUF_STATE_DONE :
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
