Hi Laurent,
thank you very much for your help.
The problem is cross talk on the camera flex cable of the Gumstix Overo.
The XCLKA signal is beside PCLK and VS. Additionally the OV5647 camera
tristate all outputs by default. This leads to HS_VS_IRQ interrupts. I
wasn't aware of the interrupts enable during the isp_xclk_prepare.
Am 01.08.2014 15:57, schrieb Laurent Pinchart:
On Thursday 31 July 2014 10:29:37 Stefan Herbrechtsmeier wrote:
Am 31.07.2014 01:10, schrieb Laurent Pinchart:
On Tuesday 15 July 2014 12:04:09 Stefan Herbrechtsmeier wrote:
Hi Laurent,
I have some problems with the omap3isp driver. At the moment I use a
linux-stable 3.14.5 with your fixes for omap3xxx-clocks.dtsi.
1. If I change the clock rate to 24 MHz in my camera driver the whole
system freeze at the clk_prepare_enable. The first enable and disable
works without any problem. The system freeze during a systemd / udev
call of media-ctl.
I've never seen that before. Where does your sensor get its clock from ?
Is it connected to the ISP XCLKA or XCLKB output ?
XCLKA
What happens if you don't change the clock rate to 24 MHz ? What rate is
it set to in that case ?
It works if I use a clock rate of 12 MHz or 36 MHz.
I use the following lines during power enable in the driver:
clk_set_rate(ov5647->clk, 24000000);
clk_prepare_enable(ov5647->clk);
This works during probe, but the second time I try to power up the
device the system stall after clk_prepare_enable.
Just to make sure I understand properly, if you change the above frequency
value to 12000000 or 36000000 without modifying anything else, the problem
doesn't occur ?
Yes.
Do you start streaming at all at any point ?
No, it stops in s_power.
I see the following dump:
[snip]
Looks like the CPU spends all its time processing interrupts. Could you
please try the following patch ? It should disable the ISP interrupt after
100000 occurrences, and create an isr_account property in sysfs that will
report the number of interrupts generated for each source. If my guess is
correct, you will hit the 100000 interrupts limit very quickly and the system
will unfreeze. If so, please report the content of /proc/interrupts
...
40: 100001 INTC 24 omap-iommu.0, OMAP3 ISP
...
and of
the isr_account property (if I remember correctly it should be located in
/sys/class/video4linux/video0/device/media0/ but you might need to search for
it).
0 0
...
30 0
31 100001
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
