Em Mon, 18 Aug 2014 12:33:39 +0000
Hans Verkuil <hverk...@xs4all.nl> escreveu:
> On 08/18/2014 11:51 AM, Mauro Carvalho Chehab wrote:
> > Right now, the au0828 driver uses .tuner to detect if analog
> > tv is being used or not. By not filling .tuner fields at the
> > board struct, the I2C core can't do decisions based on it.
> >
> > So, add a field to explicitly tell when analog TV is supported.
> >
> > No functional changes.
> >
> > Signed-off-by: Mauro Carvalho Chehab <m.che...@samsung.com>
> > ---
> > drivers/media/usb/au0828/au0828-cards.c | 10 +++-------
> > drivers/media/usb/au0828/au0828.h | 1 +
> > 2 files changed, 4 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/media/usb/au0828/au0828-cards.c
> > b/drivers/media/usb/au0828/au0828-cards.c
> > index 2c6b7da137ed..8f2fc2fe6a89 100644
> > --- a/drivers/media/usb/au0828/au0828-cards.c
> > +++ b/drivers/media/usb/au0828/au0828-cards.c
> > @@ -46,6 +46,7 @@ struct au0828_board au0828_boards[] = {
> > .name = "Hauppauge HVR850",
> > .tuner_type = TUNER_XC5000,
> > .tuner_addr = 0x61,
> > + .has_analog = 1,
> > .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
> > .input = {
> > {
> > @@ -72,12 +73,7 @@ struct au0828_board au0828_boards[] = {
> > .tuner_type = TUNER_XC5000,
> > .tuner_addr = 0x61,
> > .has_ir_i2c = 1,
> > - /* The au0828 hardware i2c implementation does not properly
> > - support the xc5000's i2c clock stretching. So we need to
> > - lower the clock frequency enough where the 15us clock
> > - stretch fits inside of a normal clock cycle, or else the
> > - au0828 fails to set the STOP bit. A 30 KHz clock puts the
> > - clock pulse width at 18us */
>
> Why was this comment block dropped? The commit message makes no mention of it.
It is a left-over. There's a similar comment similar to that at the
au0828-i2c, where it actually drops the speed to 20 kHz (and not 30 kHz as
stated on the above comment).
> > + .has_analog = 1,
> > .i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
See, despite the above comment, it is setting the speed to 250 kHz here.
> > .input = {
> > {
> > @@ -232,7 +228,7 @@ void au0828_card_analog_fe_setup(struct au0828_dev *dev)
> > }
> >
> > /* Setup tuners */
> > - if (dev->board.tuner_type != TUNER_ABSENT) {
> > + if (dev->board.tuner_type != TUNER_ABSENT && dev->board.has_analog) {
>
> This tests against TUNER_ABSENT and, even after applying patch 2, the 'Unknown
> Board' struct still specifies UNSET instead of TUNER_ABSENT. Can you change
> that as well in patch 2?
>
> This UNSET/TUNER_ABSENT confusion is similar to what I found in cx23885. I
> think
> there are several drivers that are all inconsistent in how they handle this.
>
> Regards,
>
> Hans
>
> > /* Load the tuner module, which does the attach */
> > sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
> > "tuner", dev->board.tuner_addr, NULL);
> > diff --git a/drivers/media/usb/au0828/au0828.h
> > b/drivers/media/usb/au0828/au0828.h
> > index 96bec05d7dac..20b82ba5be6c 100644
> > --- a/drivers/media/usb/au0828/au0828.h
> > +++ b/drivers/media/usb/au0828/au0828.h
> > @@ -89,6 +89,7 @@ struct au0828_board {
> > unsigned char tuner_addr;
> > unsigned char i2c_clk_divider;
> > unsigned char has_ir_i2c:1;
> > + unsigned char has_analog:1;
> > struct au0828_input input[AU0828_MAX_INPUT];
> >
> > };
> >
>
--
Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
