On 08/21/2014 06:07 PM, Sean Young wrote:
On Thu, Aug 21, 2014 at 05:24:44PM +0800, Zhangfei Gao wrote:
From: Guoxiong Yan <yanguoxi...@huawei.com>
+ rdev->driver_type = RC_DRIVER_IR_RAW;
+ rdev->allowed_protocols = RC_BIT_ALL;
+ rdev->priv = priv;
+ rdev->open = hix5hd2_ir_open;
+ rdev->close = hix5hd2_ir_close;
+ rdev->driver_name = IR_HIX5HD2_NAME;
+ rdev->map_name = RC_MAP_LIRC;
I'm not sure RC_MAP_LIRC is appropriate. If the hardware has no implicit
remote, can this be stored in device tree like the sunxi-cir.c driver does?
OK， got it.
Will set optional property "linux,rc-map-name" for the map_name.
We usually use user space lirc decoder, so this optional property may
not need to be set in dts.
+ rdev->input_name = "Hisilicon hix5hd2 Remote Control Receiver";
It would be useful is rdev->input_phys, rdev->input_id,
rdev->timeout, rdev->rx_resolution are set correctly.
OK, will set rdev->timeout, rdev->rx_resolution
Not sure the usage of rdev->input_id, why is it required?
Thanks for the suggestion.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
