Le 2014-09-02 05:02, Kamil Debski a écrit
This limitation in MFC causes an important conflict between old
videobuf and new videobuf2 drivers. Old videobuf driver (before Hans G.
proposed
patch) refuse REQBUFS(0). As MFC code has this bug that refuse
REBBUFS(N) if buffers are already allocated, it makes all this
completely incompatible. This open_mfc call seems to be the only reason
REQBUFS() cannot be called multiple time, though I must say you are
better placed then me to figure this out.
After MFCs decoding is initialized it has a fixed number of buffers.
Changing
this can be done when the stream changes its properties and resolution
change is initiated. Even then all buffers have to be
unmapped/reallocated/mapped.
There is a single hardware call that is a part of hardware initialization
that sets the buffers' addresses.
Changing the number of buffers during decoding without explicit reason to do
so (resolution change/stream properties change) would be problematic. For
hardware it is very close to reinitiating decoding - it needs to be done on
an I-frame, the header needs to be present. Otherwise some buffers would be
lost and corruption would be introduced (lack of reference frames).
I think you mentioned negotiating the number of buffers? Did you use the
V4L2_CID_MIN_BUFFERS_FOR_CAPTURE control?
That is true, though the issue isn't there. Let's say you haven't
started decoding yet. You do REQBUFS(2). because the hardware need that.
Then before you start anything else, the topology of your display path
is change, and the application need an extra 2 buffers to work properly.
With all other drivers, all we'd have to do is REQBUFS(5), with MFC we
would need to do REQBUFS(0) and then REQBUFS(5). This is a bug, there is
no reason to force this extra step.
I understand that before calling REQBUFS(N) with the new N value you
properly
unmap the buffers just like the documentation is telling?
As describe in the scenario, nothing has been mapped yet.
"Applications can call VIDIOC_REQBUFS again to change the number of buffers,
however this cannot succeed when any buffers are still mapped. A count value
of zero frees all buffers, after aborting or finishing any DMA in progress,
an implicit VIDIOC_STREAMOFF." [1]
As you can see, the spec says it can be changed, having this extra step
to change it does not seems compliant to me, at least it's not consistent.
cheers,
Nicolas
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html