Hi,
I am trying to use the CODA960 driver on a 3.18 kernel.
It seems pretty good when the module is probed (appart from the
unsupported firmware version) but when I try using the encoder, it
fails allocating dma buffers.
Here is the DT part I added :
&vpu {
compatible = "fsl,imx6q-vpu";
clocks = <&clks 168>, <&clks 140>, <&clks 142>;
clock-names = "per", "ahb", "ocram";
iramsize = <0x21000>;
iram = <&ocram>;
resets = <&src 1>;
status = "okay";
};
When booting, I see :
[ 4.410645] coda 2040000.vpu: Firmware code revision: 46056
[ 4.416312] coda 2040000.vpu: Initialized CODA960.
[ 4.421123] coda 2040000.vpu: Unsupported firmware version: 3.1.1
[ 4.483577] coda 2040000.vpu: codec registered as /dev/video[0-1]
I can start v4l2-ctl and it shows that the device seems to be ok :
v4l2-ctl --all -d /dev/video1
Driver Info (not using libv4l2):
Driver name : coda
Card type : CODA960
Bus info : platform:coda
Driver version: 3.18.0
Capabilities : 0x84208000
Video Memory-to-Memory
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04208000
Video Memory-to-Memory
Streaming
Extended Pix Format
Priority: 2
Format Video Capture:
Width/Height : 1920/1088
Pixel Format : 'YU12'
Field : None
Bytes per Line: 1920
Size Image : 3133440
Colorspace : HDTV and modern devices (ITU709)
Flags :
Format Video Output:
Width/Height : 1920/1088
Pixel Format : 'H264'
Field : None
Bytes per Line: 0
Size Image : 1048576
Colorspace : HDTV and modern devices (ITU709)
Flags :
Selection: compose, Left 0, Top 0, Width 1920, Height 1088
Selection: compose_default, Left 0, Top 0, Width 1920, Height 1088
Selection: compose_bounds, Left 0, Top 0, Width 1920, Height 1088
Selection: compose_padded, Left 0, Top 0, Width 1920, Height 1088
Selection: crop, Left 0, Top 0, Width 1920, Height 1088
Selection: crop_default, Left 0, Top 0, Width 1920, Height 1088
Selection: crop_bounds, Left 0, Top 0, Width 1920, Height 1088
User Controls
horizontal_flip (bool) : default=0 value=0
vertical_flip (bool) : default=0 value=0
Codec Controls
video_gop_size (int) : min=1 max=60 step=1
default=16 value=16
video_bitrate (int) : min=0 max=32767000 step=1
default=0 value=0
number_of_intra_refresh_mbs (int) : min=0 max=8160 step=1
default=0 value=0
sequence_header_mode (menu) : min=0 max=1 default=1 value=1
maximum_bytes_in_a_slice (int) : min=1 max=1073741823 step=1
default=500 value=500
number_of_mbs_in_a_slice (int) : min=1 max=1073741823 step=1
default=1 value=1
slice_partitioning_method (menu) : min=0 max=2 default=0 value=0
h264_i_frame_qp_value (int) : min=0 max=51 step=1
default=25 value=25
h264_p_frame_qp_value (int) : min=0 max=51 step=1
default=25 value=25
h264_maximum_qp_value (int) : min=0 max=51 step=1
default=51 value=51
h264_loop_filter_alpha_offset (int) : min=0 max=15 step=1 default=0
value=0
h264_loop_filter_beta_offset (int) : min=0 max=15 step=1 default=0
value=0
h264_loop_filter_mode (menu) : min=0 max=1 default=0 value=0
mpeg4_i_frame_qp_value (int) : min=1 max=31 step=1 default=2
value=2
mpeg4_p_frame_qp_value (int) : min=1 max=31 step=1 default=2
value=2
horizontal_flip (bool) : default=0 value=0
vertical_flip (bool) : default=0 value=0
But when I try to get a file outputed, it fails :
v4l2-ctl -d1 --stream-out-mmap --stream-mmap --stream-to x.raw
[ 1197.292256] coda 2040000.vpu: dma_alloc_coherent of size 1048576 failed
VIDIOC_REQBUFS: failed: Cannot allocate memory
Did I forget to do something ?
