Em Wed, 29 Oct 2014 08:29:08 +0100
Hans Verkuil <hverk...@xs4all.nl> escreveu:
> On 10/28/2014 07:26 PM, Mauro Carvalho Chehab wrote:
> > Em Fri, 10 Oct 2014 10:04:58 +0200
> > Hans Verkuil <hverk...@xs4all.nl> escreveu:
> >
> >> (This patch is from Divneil except for the vivid changes which I added. He
> >> had
> >> difficulties posting the patch without the mailer mangling it, so I'm
> >> reposting
> >> it for him)
> >>
> >> - vb2 drivers to rely on VB2_MAX_FRAME.
> >>
> >> - VB2_MAX_FRAME bumps the value to 64 from current 32
> >
> > Hmm... what's the point of announcing a maximum of 32 buffers to userspace,
> > but using internally 64?
>
> Where do we announce 32 buffers?
VIDEO_MAX_FRAME is defined at videodev2.h:
include/uapi/linux/videodev2.h:#define VIDEO_MAX_FRAME 32
So, it is part of userspace API. Yeah, I know, it sucks, but apps
may be using it to limit the max number of buffers.
> The only place where a maximum is enforced is
> in REQBUFS/CREATE_BUFS. Most (all?) vb2 drivers leave enforcing the maximum to
> vb2, they only care about the minimum, so they will automatically use the new
> maximum.
>
> >
> > Btw, wouldn't this change break for DaVinci:
> > include/media/davinci/vpfe_capture.h: u8 *fbuffers[VIDEO_MAX_FRAME];
>
> That driver still uses vb1, so this patch won't break it.
No, it doesn't. Check the DaVinci Kconfig/Makefile. I merged a patchset
that converted it to VB2.
Regards,
Mauro
>
> Regards,
>
> Hans
>
> >
> > Regards,
> > Mauro
> >
> >>
> >> Signed-off-by: Divneil Wadhawan <divneil.wadha...@st.com>
> >> Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
> >> ---
> >> drivers/media/pci/saa7134/saa7134-ts.c | 4 ++--
> >> drivers/media/pci/saa7134/saa7134-vbi.c | 4 ++--
> >> drivers/media/pci/saa7134/saa7134-video.c | 2 +-
> >> drivers/media/platform/mem2mem_testdev.c | 2 +-
> >> drivers/media/platform/ti-vpe/vpe.c | 2 +-
> >> drivers/media/platform/vivid/vivid-core.h | 2 +-
> >> drivers/media/platform/vivid/vivid-ctrls.c | 2 +-
> >> drivers/media/platform/vivid/vivid-vid-cap.c | 2 +-
> >> drivers/media/v4l2-core/videobuf2-core.c | 8 ++++----
> >> include/media/videobuf2-core.h | 4 +++-
> >> 10 files changed, 17 insertions(+), 15 deletions(-)
> >>
> >> diff --git a/drivers/media/pci/saa7134/saa7134-ts.c
> >> b/drivers/media/pci/saa7134/saa7134-ts.c
> >> index bd25323..0d04995 100644
> >> --- a/drivers/media/pci/saa7134/saa7134-ts.c
> >> +++ b/drivers/media/pci/saa7134/saa7134-ts.c
> >> @@ -227,8 +227,8 @@ int saa7134_ts_init1(struct saa7134_dev *dev)
> >> /* sanitycheck insmod options */
> >> if (tsbufs < 2)
> >> tsbufs = 2;
> >> - if (tsbufs > VIDEO_MAX_FRAME)
> >> - tsbufs = VIDEO_MAX_FRAME;
> >> + if (tsbufs > VB2_MAX_FRAME)
> >> + tsbufs = VB2_MAX_FRAME;
> >> if (ts_nr_packets < 4)
> >> ts_nr_packets = 4;
> >> if (ts_nr_packets > 312)
> >> diff --git a/drivers/media/pci/saa7134/saa7134-vbi.c
> >> b/drivers/media/pci/saa7134/saa7134-vbi.c
> >> index 4f0b101..2269837 100644
> >> --- a/drivers/media/pci/saa7134/saa7134-vbi.c
> >> +++ b/drivers/media/pci/saa7134/saa7134-vbi.c
> >> @@ -203,8 +203,8 @@ int saa7134_vbi_init1(struct saa7134_dev *dev)
> >>
> >> if (vbibufs < 2)
> >> vbibufs = 2;
> >> - if (vbibufs > VIDEO_MAX_FRAME)
> >> - vbibufs = VIDEO_MAX_FRAME;
> >> + if (vbibufs > VB2_MAX_FRAME)
> >> + vbibufs = VB2_MAX_FRAME;
> >> return 0;
> >> }
> >>
> >> diff --git a/drivers/media/pci/saa7134/saa7134-video.c
> >> b/drivers/media/pci/saa7134/saa7134-video.c
> >> index fc4a427..c7f39be 100644
> >> --- a/drivers/media/pci/saa7134/saa7134-video.c
> >> +++ b/drivers/media/pci/saa7134/saa7134-video.c
> >> @@ -2030,7 +2030,7 @@ int saa7134_video_init1(struct saa7134_dev *dev)
> >> int ret;
> >>
> >> /* sanitycheck insmod options */
> >> - if (gbuffers < 2 || gbuffers > VIDEO_MAX_FRAME)
> >> + if (gbuffers < 2 || gbuffers > VB2_MAX_FRAME)
> >> gbuffers = 2;
> >> if (gbufsize > gbufsize_max)
> >> gbufsize = gbufsize_max;
> >> diff --git a/drivers/media/platform/mem2mem_testdev.c
> >> b/drivers/media/platform/mem2mem_testdev.c
> >> index c1b03cf..e1ff7e0 100644
> >> --- a/drivers/media/platform/mem2mem_testdev.c
> >> +++ b/drivers/media/platform/mem2mem_testdev.c
> >> @@ -55,7 +55,7 @@ MODULE_PARM_DESC(debug, "activates debug info");
> >> #define MEM2MEM_NAME "m2m-testdev"
> >>
> >> /* Per queue */
> >> -#define MEM2MEM_DEF_NUM_BUFS VIDEO_MAX_FRAME
> >> +#define MEM2MEM_DEF_NUM_BUFS VB2_MAX_FRAME
> >> /* In bytes, per queue */
> >> #define MEM2MEM_VID_MEM_LIMIT (16 * 1024 * 1024)
> >>
> >> diff --git a/drivers/media/platform/ti-vpe/vpe.c
> >> b/drivers/media/platform/ti-vpe/vpe.c
> >> index 9a081c2..04e37c0 100644
> >> --- a/drivers/media/platform/ti-vpe/vpe.c
> >> +++ b/drivers/media/platform/ti-vpe/vpe.c
> >> @@ -1971,7 +1971,7 @@ static const struct v4l2_ctrl_config
> >> vpe_bufs_per_job = {
> >> .type = V4L2_CTRL_TYPE_INTEGER,
> >> .def = VPE_DEF_BUFS_PER_JOB,
> >> .min = 1,
> >> - .max = VIDEO_MAX_FRAME,
> >> + .max = VB2_MAX_FRAME,
> >> .step = 1,
> >> };
> >>
> >> diff --git a/drivers/media/platform/vivid/vivid-core.h
> >> b/drivers/media/platform/vivid/vivid-core.h
> >> index 811c286..c0375a1 100644
> >> --- a/drivers/media/platform/vivid/vivid-core.h
> >> +++ b/drivers/media/platform/vivid/vivid-core.h
> >> @@ -346,7 +346,7 @@ struct vivid_dev {
> >> /* video capture */
> >> struct tpg_data tpg;
> >> unsigned ms_vid_cap;
> >> - bool must_blank[VIDEO_MAX_FRAME];
> >> + bool must_blank[VB2_MAX_FRAME];
> >>
> >> const struct vivid_fmt *fmt_cap;
> >> struct v4l2_fract timeperframe_vid_cap;
> >> diff --git a/drivers/media/platform/vivid/vivid-ctrls.c
> >> b/drivers/media/platform/vivid/vivid-ctrls.c
> >> index d5cbf00..7162f97 100644
> >> --- a/drivers/media/platform/vivid/vivid-ctrls.c
> >> +++ b/drivers/media/platform/vivid/vivid-ctrls.c
> >> @@ -332,7 +332,7 @@ static int vivid_vid_cap_s_ctrl(struct v4l2_ctrl *ctrl)
> >> break;
> >> case VIVID_CID_PERCENTAGE_FILL:
> >> tpg_s_perc_fill(&dev->tpg, ctrl->val);
> >> - for (i = 0; i < VIDEO_MAX_FRAME; i++)
> >> + for (i = 0; i < VB2_MAX_FRAME; i++)
> >> dev->must_blank[i] = ctrl->val < 100;
> >> break;
> >> case VIVID_CID_INSERT_SAV:
> >> diff --git a/drivers/media/platform/vivid/vivid-vid-cap.c
> >> b/drivers/media/platform/vivid/vivid-vid-cap.c
> >> index 331c544..55e8158 100644
> >> --- a/drivers/media/platform/vivid/vivid-vid-cap.c
> >> +++ b/drivers/media/platform/vivid/vivid-vid-cap.c
> >> @@ -252,7 +252,7 @@ static int vid_cap_start_streaming(struct vb2_queue
> >> *vq, unsigned count)
> >>
> >> dev->vid_cap_seq_count = 0;
> >> dprintk(dev, 1, "%s\n", __func__);
> >> - for (i = 0; i < VIDEO_MAX_FRAME; i++)
> >> + for (i = 0; i < VB2_MAX_FRAME; i++)
> >> dev->must_blank[i] = tpg_g_perc_fill(&dev->tpg) < 100;
> >> if (dev->start_streaming_error) {
> >> dev->start_streaming_error = false;
> >> diff --git a/drivers/media/v4l2-core/videobuf2-core.c
> >> b/drivers/media/v4l2-core/videobuf2-core.c
> >> index 15b02f9..60354b4 100644
> >> --- a/drivers/media/v4l2-core/videobuf2-core.c
> >> +++ b/drivers/media/v4l2-core/videobuf2-core.c
> >> @@ -911,7 +911,7 @@ static int __reqbufs(struct vb2_queue *q, struct
> >> v4l2_requestbuffers *req)
> >> /*
> >> * Make sure the requested values and current defaults are sane.
> >> */
> >> - num_buffers = min_t(unsigned int, req->count, VIDEO_MAX_FRAME);
> >> + num_buffers = min_t(unsigned int, req->count, VB2_MAX_FRAME);
> >> num_buffers = max_t(unsigned int, num_buffers, q->min_buffers_needed);
> >> memset(q->plane_sizes, 0, sizeof(q->plane_sizes));
> >> memset(q->alloc_ctx, 0, sizeof(q->alloc_ctx));
> >> @@ -1015,7 +1015,7 @@ static int __create_bufs(struct vb2_queue *q, struct
> >> v4l2_create_buffers *create
> >> unsigned int num_planes = 0, num_buffers, allocated_buffers;
> >> int ret;
> >>
> >> - if (q->num_buffers == VIDEO_MAX_FRAME) {
> >> + if (q->num_buffers == VB2_MAX_FRAME) {
> >> dprintk(1, "maximum number of buffers already allocated\n");
> >> return -ENOBUFS;
> >> }
> >> @@ -1026,7 +1026,7 @@ static int __create_bufs(struct vb2_queue *q, struct
> >> v4l2_create_buffers *create
> >> q->memory = create->memory;
> >> }
> >>
> >> - num_buffers = min(create->count, VIDEO_MAX_FRAME - q->num_buffers);
> >> + num_buffers = min(create->count, VB2_MAX_FRAME - q->num_buffers);
> >>
> >> /*
> >> * Ask the driver, whether the requested number of buffers, planes per
> >> @@ -2725,7 +2725,7 @@ struct vb2_fileio_data {
> >> struct v4l2_requestbuffers req;
> >> struct v4l2_plane p;
> >> struct v4l2_buffer b;
> >> - struct vb2_fileio_buf bufs[VIDEO_MAX_FRAME];
> >> + struct vb2_fileio_buf bufs[VB2_MAX_FRAME];
> >> unsigned int cur_index;
> >> unsigned int initial_index;
> >> unsigned int q_count;
> >> diff --git a/include/media/videobuf2-core.h
> >> b/include/media/videobuf2-core.h
> >> index a8608ce..66dcc40 100644
> >> --- a/include/media/videobuf2-core.h
> >> +++ b/include/media/videobuf2-core.h
> >> @@ -18,6 +18,8 @@
> >> #include <linux/videodev2.h>
> >> #include <linux/dma-buf.h>
> >>
> >> +#define VB2_MAX_FRAME 64
> >> +
> >> struct vb2_alloc_ctx;
> >> struct vb2_fileio_data;
> >> struct vb2_threadio_data;
> >> @@ -402,7 +404,7 @@ struct vb2_queue {
> >> /* private: internal use only */
> >> struct mutex mmap_lock;
> >> enum v4l2_memory memory;
> >> - struct vb2_buffer *bufs[VIDEO_MAX_FRAME];
> >> + struct vb2_buffer *bufs[VB2_MAX_FRAME];
> >> unsigned int num_buffers;
> >>
> >> struct list_head queued_list;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
