In order to have v4l2-compliance tool pass the G/S_EDID some modifications
where needed in the driver.
In particular, the edid.reserved zone must be blanked.

Signed-off-by: Jean-Michel Hautbois <jean-michel.hautb...@vodalys.com>
---
 drivers/media/i2c/adv7604.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index 47795ff..0848ee7 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -1997,16 +1997,23 @@ static int adv7604_get_edid(struct v4l2_subdev *sd, 
struct v4l2_edid *edid)
        struct adv7604_state *state = to_state(sd);
        u8 *data = NULL;
 
+       memset(edid->reserved, 0, sizeof(edid->reserved));
        if (edid->pad > ADV7604_PAD_HDMI_PORT_D)
                return -EINVAL;
-       if (edid->blocks == 0)
-               return -EINVAL;
-       if (edid->blocks > 2)
-               return -EINVAL;
-       if (edid->start_block > 1)
+
+       if (edid->start_block == 0 && edid->blocks == 0) {
+               edid->blocks = state->edid.blocks;
+               return 0;
+       }
+
+       if (state->edid.blocks == 0)
+               return -ENODATA;
+
+       if (edid->start_block >= state->edid.blocks)
                return -EINVAL;
-       if (edid->start_block == 1)
-               edid->blocks = 1;
+
+       if (edid->start_block + edid->blocks > state->edid.blocks)
+               edid->blocks = state->edid.blocks - edid->start_block;
 
        if (edid->blocks > state->edid.blocks)
                edid->blocks = state->edid.blocks;
@@ -2068,6 +2075,8 @@ static int adv7604_set_edid(struct v4l2_subdev *sd, 
struct v4l2_edid *edid)
        int err;
        int i;
 
+       memset(edid->reserved, 0, sizeof(edid->reserved));
+
        if (edid->pad > ADV7604_PAD_HDMI_PORT_D)
                return -EINVAL;
        if (edid->start_block != 0)
@@ -2164,7 +2173,6 @@ static int adv7604_set_edid(struct v4l2_subdev *sd, 
struct v4l2_edid *edid)
                return -EIO;
        }
 
-
        /* enable hotplug after 100 ms */
        queue_delayed_work(state->work_queues,
                        &state->delayed_work_enable_hotplug, HZ / 10);
-- 
2.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to