Hi,
analog TV on Hauppauge HVR 900 [2040:6500] - audio works correctly but
video stops after few samples, audio continues after video stop,
tested:
mplayer tv:// -tv
norm=PAL-BG:freq=687.5:input=0:device=/dev/video0:alsa:amode=1:adevice=hw.2,0:audiorate=48000:forceaudio:immediatemode=0
-hardframedrop -ao alsa -vo x11
mplayer output:
MPlayer svn r34540 (Debian), built with gcc-4.7 (C) 2000-2012 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing tv://.
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <olschew...@zpr.uni-koeln.de>
comment: first try, more to come ;-)
Selected device: Hauppauge WinTV HVR 900
Tuner cap:
Tuner rxs:
Capabilities: video capture VBI capture device tuner audio
read/write streaming
supported norms: 0 = NTSC; 1 = NTSC-M; 2 = NTSC-M-JP; 3 = NTSC-M-KR;
4 = NTSC-443; 5 = PAL; 6 = PAL-BG; 7 = PAL-H; 8 = PAL-I; 9 = PAL-DK;
10 = PAL-M; 11 = PAL-N; 12 = PAL-Nc; 13 = PAL-60; 14 = SECAM; 15 =
SECAM-B; 16 = SECAM-G; 17 = SECAM-H; 18 = SECAM-DK; 19 = SECAM-L; 20 =
SECAM-Lc;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
Current input: 0
Current format: YUYV
v4l2: current audio mode is : STEREO
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
Movie-Aspect is undefined - no prescaling applied.
[swscaler @ 0x13c7d40] BICUBIC scaler, from yuyv422 to bgra using MMX2
VO: [x11] 720x576 => 720x576 BGRA
Selected video codec: [rawyuy2] vfm: raw (RAW YUY2)
==========================================================================
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
A: 3.1 V: 1.6 A-V: 1.447 ct: 0.165 92/ 92 0% 8% 28.8% 50 0
************************************************
**** Your system is too SLOW to play this! ****
************************************************
Possible reasons, problems, workarounds:
- Most common: broken/buggy _audio_ driver
- Try -ao sdl or use the OSS emulation of ALSA.
- Experiment with different values for -autosync, 30 is a good start.
- Slow video output
- Try a different -vo driver (-vo help for a list) or try -framedrop!
- Slow CPU
- Don't try to play a big DVD/DivX on a slow CPU! Try some of the lavdopts,
e.g. -vfm ffmpeg -lavdopts lowres=1:fast:skiploopfilter=all.
- Broken file
- Try various combinations of -nobps -ni -forceidx -mc 0.
- Slow media (NFS/SMB mounts, DVD, VCD etc)
- Try -cache 8192.
- Are you using -cache to play a non-interleaved AVI file?
- Try -nocache.
Read DOCS/HTML/en/video.html for tuning/speedup tips.
If none of this helps you, read DOCS/HTML/en/bugreports.html.
A: 11.7 V: 5.1 A-V: 6.636 ct: 0.250 308/308 0% 2% 12.9% 266 0
v4l2: 310 frames successfully processed, 0 frames dropped.
kernel output:
[ 427.441405] usb 3-13.5.5: new high-speed USB device number 9 using xhci_hcd
[ 427.534116] usb 3-13.5.5: New USB device found, idVendor=2040, idProduct=6500
[ 427.534126] usb 3-13.5.5: New USB device strings: Mfr=0, Product=1,
SerialNumber=2
[ 427.534131] usb 3-13.5.5: Product: WinTV HVR-900
[ 427.534136] usb 3-13.5.5: SerialNumber: 4026875858
[ 427.586621] media: Linux media interface: v0.10
[ 427.625926] Linux video capture interface: v2.00
[ 427.669943] em28xx: New device WinTV HVR-900 @ 480 Mbps
(2040:6500, interface 0, class 0)
[ 427.669945] em28xx: Video interface 0 found: isoc
[ 427.669946] em28xx: DVB interface 0 found: isoc
[ 427.669973] em28xx: chip ID is em2882/3
[ 427.838493] em2882/3 #0: EEPROM ID = 1a eb 67 95, EEPROM hash = 0x43a734dd
[ 427.838499] em2882/3 #0: EEPROM info:
[ 427.838503] em2882/3 #0: AC97 audio (5 sample rates)
[ 427.838506] em2882/3 #0: 500mA max power
[ 427.838510] em2882/3 #0: Table at offset 0x24, strings=0x1e82,
0x186a, 0x0000
[ 427.838515] em2882/3 #0: Identified as Hauppauge WinTV HVR 900 (card=10)
[ 427.840708] tveeprom 7-0050: Hauppauge model 65008, rev A1C0, serial# 344018
[ 427.840714] tveeprom 7-0050: tuner model is Xceive XC3028 (idx 120, type 71)
[ 427.840719] tveeprom 7-0050: TV standards PAL(B/G) PAL(I)
PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
[ 427.840722] tveeprom 7-0050: audio processor is None (idx 0)
[ 427.840725] tveeprom 7-0050: has radio
[ 427.840727] em2882/3 #0: analog set to isoc mode.
[ 427.840729] em2882/3 #0: dvb set to isoc mode.
[ 427.840760] em28xx audio device (2040:6500): interface 1, class 1
[ 427.840775] em28xx audio device (2040:6500): interface 2, class 1
[ 427.840832] usbcore: registered new interface driver em28xx
[ 427.872945] em2882/3 #0: Registering V4L2 extension
[ 427.910653] tvp5150 7-005c: chip found @ 0xb8 (em2882/3 #0)
[ 427.910655] tvp5150 7-005c: tvp5150am1 detected.
[ 427.912474] tvp5150 7-005c: i2c i/o error: rc == -6
[ 427.931506] tuner 7-0061: Tuner -1 found with type(s) Radio TV.
[ 427.970505] xc2028 7-0061: creating new instance
[ 427.970507] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
[ 427.970545] em2882/3 #0: Config register raw data: 0x50
[ 427.970773] em2882/3 #0: AC97 vendor ID = 0xffffffff
[ 427.970893] em2882/3 #0: AC97 features = 0x6a90
[ 427.970894] em2882/3 #0: Empia 202 AC97 audio processor detected
[ 428.007655] usbcore: registered new interface driver snd-usb-audio
[ 428.030650] tvp5150 7-005c: i2c i/o error: rc == -6
[ 428.033304] tvp5150 7-005c: i2c i/o error: rc == -6
[ 428.036606] tvp5150 7-005c: i2c i/o error: rc == -6
[ 428.037127] xc2028 7-0061: Loading 80 firmware images from
xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 428.082802] tvp5150 7-005c: i2c i/o error: rc == -6
[ 428.132097] xc2028 7-0061: Loading firmware for type=BASE F8MHZ MTS
(7), id 0000000000000000.
[ 429.044910] MTS (4), id 00000000000000ff:
[ 429.044919] xc2028 7-0061: Loading firmware for type=MTS (4), id
0000000100000007.
[ 429.372336] em2882/3 #0: V4L2 video device registered as video0
[ 429.372343] em2882/3 #0: V4L2 VBI device registered as vbi0
[ 429.372840] em2882/3 #0: V4L2 extension successfully initialized
[ 429.372845] em28xx: Registered (Em28xx v4l2 Extension) extension
[ 429.421235] em2882/3 #0: Binding DVB extension
[ 429.432300] tvp5150 7-005c: i2c i/o error: rc == -6
[ 429.433737] tvp5150 7-005c: i2c i/o error: rc == -6
[ 429.434274] tvp5150 7-005c: i2c i/o error: rc == -6
[ 429.555251] xc2028 7-0061: attaching existing instance
[ 429.555259] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
[ 429.555265] em2882/3 #0: em2882/3 #0/2: xc3028 attached
[ 429.555268] DVB: registering new adapter (em2882/3 #0)
[ 429.555277] usb 3-13.5.5: DVB: registering adapter 0 frontend 0
(Zarlink ZL10353 DVB-T)...
[ 429.556086] em2882/3 #0: DVB extension successfully initialized
[ 429.556096] em28xx: Registered (Em28xx dvb Extension) extension
[ 429.574991] em2882/3 #0: Registering input extension
[ 429.610030] Registered IR keymap rc-hauppauge
[ 429.610306] input: em28xx IR (em2882/3 #0) as
/devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.5/3-13.5.5/rc/rc0/input22
[ 429.611069] rc0: em28xx IR (em2882/3 #0) as
/devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.5/3-13.5.5/rc/rc0
[ 429.611189] em2882/3 #0: Input extension successfully initalized
[ 429.611193] em28xx: Registered (Em28xx Input Extension) extension
[ 434.992078] tvp5150 7-005c: i2c i/o error: rc == -6
[ 434.993487] tvp5150 7-005c: i2c i/o error: rc == -6
[ 434.995820] tvp5150 7-005c: i2c i/o error: rc == -6
[ 434.996902] tvp5150 7-005c: i2c i/o error: rc == -6
[ 434.998295] tvp5150 7-005c: i2c i/o error: rc == -6
[ 435.110378] xc2028 7-0061: Loading firmware for type=BASE F8MHZ MTS
(7), id 0000000000000000.
[ 436.055085] MTS (4), id 00000000000000ff:
[ 436.055097] xc2028 7-0061: Loading firmware for type=MTS (4), id
0000000100000007.
[ 436.190777] tvp5150 7-005c: i2c i/o error: rc == -6
[ 436.190784] tvp5150 7-005c: tvp5150_selmux: failed with error = -6
[ 436.263263] xc2028 7-0061: Loading firmware for type=MTS (4), id
0000000100000007.
[ 436.633107] tvp5150 7-005c: i2c i/o error: rc == -6
Kind regards,
Michal
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
