Hi Hans,
2014-11-07 13:34 GMT+01:00 Hans Verkuil <hverk...@xs4all.nl>:
> From: Hans Verkuil <hans.verk...@cisco.com>
>
> In order to have v4l2-compliance tool pass the G/S_EDID some modifications
> where needed in the driver.
> In particular, the edid.reserved zone must be blanked.
>
> Based on a patch from Jean-Michel Hautbois <jean-michel.hautb...@vodalys.com>,
> but reworked it a bit. It should use edid.present instead of edid.blocks as
> the
> check whether edid data is present.
I may have missed it, but you did not implement it using edid.present
in the code below... ?
> Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
> ---
> drivers/media/i2c/adv7604.c | 37 ++++++++++++++++++-------------------
> 1 file changed, 18 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
> index 47795ff..d64fbd9 100644
> --- a/drivers/media/i2c/adv7604.c
> +++ b/drivers/media/i2c/adv7604.c
> @@ -1997,19 +1997,7 @@ static int adv7604_get_edid(struct v4l2_subdev *sd,
> struct v4l2_edid *edid)
> struct adv7604_state *state = to_state(sd);
> u8 *data = NULL;
>
> - if (edid->pad > ADV7604_PAD_HDMI_PORT_D)
> - return -EINVAL;
> - if (edid->blocks == 0)
> - return -EINVAL;
> - if (edid->blocks > 2)
> - return -EINVAL;
> - if (edid->start_block > 1)
> - return -EINVAL;
> - if (edid->start_block == 1)
> - edid->blocks = 1;
> -
> - if (edid->blocks > state->edid.blocks)
> - edid->blocks = state->edid.blocks;
> + memset(edid->reserved, 0, sizeof(edid->reserved));
>
> switch (edid->pad) {
> case ADV7604_PAD_HDMI_PORT_A:
> @@ -2021,14 +2009,24 @@ static int adv7604_get_edid(struct v4l2_subdev *sd,
> struct v4l2_edid *edid)
> break;
> default:
> return -EINVAL;
> - break;
> }
> - if (!data)
> +
> + if (edid->start_block == 0 && edid->blocks == 0) {
> + edid->blocks = state->edid.blocks;
> + return 0;
> + }
> +
> + if (data == NULL)
> return -ENODATA;
>
> - memcpy(edid->edid,
> - data + edid->start_block * 128,
> - edid->blocks * 128);
> + if (edid->start_block >= state->edid.blocks)
> + return -EINVAL;
> +
> + if (edid->start_block + edid->blocks > state->edid.blocks)
> + edid->blocks = state->edid.blocks - edid->start_block;
> +
> + memcpy(edid->edid, data + edid->start_block * 128, edid->blocks *
> 128);
> +
> return 0;
> }
>
> @@ -2068,6 +2066,8 @@ static int adv7604_set_edid(struct v4l2_subdev *sd,
> struct v4l2_edid *edid)
> int err;
> int i;
>
> + memset(edid->reserved, 0, sizeof(edid->reserved));
> +
> if (edid->pad > ADV7604_PAD_HDMI_PORT_D)
> return -EINVAL;
> if (edid->start_block != 0)
> @@ -2164,7 +2164,6 @@ static int adv7604_set_edid(struct v4l2_subdev *sd,
> struct v4l2_edid *edid)
> return -EIO;
> }
>
> -
> /* enable hotplug after 100 ms */
> queue_delayed_work(state->work_queues,
> &state->delayed_work_enable_hotplug, HZ / 10);
> --
> 2.1.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
