Em Wed, 12 Nov 2014 06:23:06 +0200
Antti Palosaari <cr...@iki.fi> escreveu:
> There is RTL2832P devices having extra MN88472 demodulator. This
> patch add support for such configuration. Logically MN88472 slave
> demodulator is connected to RTL2832 master demodulator, both I2C
> bus and TS input. RTL2832 is integrated to RTL2832U and RTL2832P
> chips. Chip version RTL2832P has extra TS interface for connecting
> slave demodulator.
>
> Signed-off-by: Antti Palosaari <cr...@iki.fi>
> ---
> drivers/media/usb/dvb-usb-v2/Kconfig | 1 +
> drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 143
> +++++++++++++++++++++++++-------
> drivers/media/usb/dvb-usb-v2/rtl28xxu.h | 5 ++
> 3 files changed, 118 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig
> b/drivers/media/usb/dvb-usb-v2/Kconfig
> index 7423033..9050933 100644
> --- a/drivers/media/usb/dvb-usb-v2/Kconfig
> +++ b/drivers/media/usb/dvb-usb-v2/Kconfig
> @@ -130,6 +130,7 @@ config DVB_USB_RTL28XXU
> select DVB_RTL2830
> select DVB_RTL2832
> select DVB_RTL2832_SDR if (MEDIA_SUBDRV_AUTOSELECT && MEDIA_SDR_SUPPORT)
> + select DVB_MN88472 if MEDIA_SUBDRV_AUTOSELECT
> select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
> select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
> select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT
This is not a good idea, as the MN88472 is in staging.
Select is not recursive, and won't select STAGING. Also, we don't want
to enable a staging driver by default on distros.
> diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
> b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
> index 5ea52c7..e3c20f4 100644
> --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
> +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
> @@ -24,6 +24,7 @@
>
> #include "rtl2830.h"
> #include "rtl2832.h"
> +#include "mn88472.h"
>
> #include "qt1010.h"
> #include "mt2060.h"
> @@ -420,6 +421,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
> struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
> struct rtl28xxu_req req_r820t = {0x0034, CMD_I2C_RD, 1, buf};
> struct rtl28xxu_req req_r828d = {0x0074, CMD_I2C_RD, 1, buf};
> + struct rtl28xxu_req req_mn88472 = {0xff38, CMD_I2C_RD, 1, buf};
>
> dev_dbg(&d->udev->dev, "%s:\n", __func__);
>
> @@ -449,7 +451,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
> if (ret == 0 && buf[0] == 0xa1) {
> priv->tuner = TUNER_RTL2832_FC0012;
> priv->tuner_name = "FC0012";
> - goto found;
> + goto tuner_found;
> }
>
> /* check FC0013 ID register; reg=00 val=a3 */
> @@ -457,7 +459,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
> if (ret == 0 && buf[0] == 0xa3) {
> priv->tuner = TUNER_RTL2832_FC0013;
> priv->tuner_name = "FC0013";
> - goto found;
> + goto tuner_found;
> }
>
> /* check MT2266 ID register; reg=00 val=85 */
> @@ -465,7 +467,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
> if (ret == 0 && buf[0] == 0x85) {
> priv->tuner = TUNER_RTL2832_MT2266;
> priv->tuner_name = "MT2266";
> - goto found;
> + goto tuner_found;
> }
>
> /* check FC2580 ID register; reg=01 val=56 */
> @@ -473,7 +475,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
> if (ret == 0 && buf[0] == 0x56) {
> priv->tuner = TUNER_RTL2832_FC2580;
> priv->tuner_name = "FC2580";
> - goto found;
> + goto tuner_found;
> }
>
> /* check MT2063 ID register; reg=00 val=9e || 9c */
> @@ -481,7 +483,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
> if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) {
> priv->tuner = TUNER_RTL2832_MT2063;
> priv->tuner_name = "MT2063";
> - goto found;
> + goto tuner_found;
> }
>
> /* check MAX3543 ID register; reg=00 val=38 */
> @@ -489,7 +491,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
> if (ret == 0 && buf[0] == 0x38) {
> priv->tuner = TUNER_RTL2832_MAX3543;
> priv->tuner_name = "MAX3543";
> - goto found;
> + goto tuner_found;
> }
>
> /* check TUA9001 ID register; reg=7e val=2328 */
> @@ -497,7 +499,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
> if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) {
> priv->tuner = TUNER_RTL2832_TUA9001;
> priv->tuner_name = "TUA9001";
> - goto found;
> + goto tuner_found;
> }
>
> /* check MXL5007R ID register; reg=d9 val=14 */
> @@ -505,7 +507,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
> if (ret == 0 && buf[0] == 0x14) {
> priv->tuner = TUNER_RTL2832_MXL5007T;
> priv->tuner_name = "MXL5007T";
> - goto found;
> + goto tuner_found;
> }
>
> /* check E4000 ID register; reg=02 val=40 */
> @@ -513,7 +515,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
> if (ret == 0 && buf[0] == 0x40) {
> priv->tuner = TUNER_RTL2832_E4000;
> priv->tuner_name = "E4000";
> - goto found;
> + goto tuner_found;
> }
>
> /* check TDA18272 ID register; reg=00 val=c760 */
> @@ -521,7 +523,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
> if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) {
> priv->tuner = TUNER_RTL2832_TDA18272;
> priv->tuner_name = "TDA18272";
> - goto found;
> + goto tuner_found;
> }
>
> /* check R820T ID register; reg=00 val=69 */
> @@ -529,7 +531,7 @@ static int rtl2832u_read_config(struct dvb_usb_device *d)
> if (ret == 0 && buf[0] == 0x69) {
> priv->tuner = TUNER_RTL2832_R820T;
> priv->tuner_name = "R820T";
> - goto found;
> + goto tuner_found;
> }
>
> /* check R828D ID register; reg=00 val=69 */
> @@ -537,13 +539,37 @@ static int rtl2832u_read_config(struct dvb_usb_device
> *d)
> if (ret == 0 && buf[0] == 0x69) {
> priv->tuner = TUNER_RTL2832_R828D;
> priv->tuner_name = "R828D";
> - goto found;
> + goto tuner_found;
> }
>
> -
> -found:
> +tuner_found:
> dev_dbg(&d->udev->dev, "%s: tuner=%s\n", __func__, priv->tuner_name);
>
> + /* probe slave demod */
> + if (priv->tuner == TUNER_RTL2832_R828D) {
> + /* power on MN88472 demod on GPIO0 */
> + ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x01, 0x01);
> + if (ret)
> + goto err;
> +
> + ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x01);
> + if (ret)
> + goto err;
> +
> + ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x01, 0x01);
> + if (ret)
> + goto err;
> +
> + /* check MN88472 answers */
> + ret = rtl28xxu_ctrl_msg(d, &req_mn88472);
> + if (ret == 0 && buf[0] == 0x02) {
> + dev_dbg(&d->udev->dev, "%s: MN88472 found\n", __func__);
> + priv->slave_demod = SLAVE_DEMOD_MN88472;
> + goto demod_found;
> + }
> + }
> +
> +demod_found:
> /* close demod I2C gate */
> ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
> if (ret < 0)
> @@ -768,6 +794,18 @@ static int rtl2832u_frontend_callback(void
> *adapter_priv, int component,
> return 0;
> }
>
> +/* FIXME: this is a bit hackish solution */
> +/* slave demod TS output is connected to master demod TS input */
> +static int rtl28xxu_mn88472_init(struct dvb_frontend *fe)
> +{
> + struct dvb_usb_adapter *adap = fe_to_adap(fe);
> + struct rtl28xxu_priv *priv = fe_to_priv(fe);
> + /* enable RTL2832 PIP mode */
> + adap->fe[0]->dtv_property_cache.frequency = 0;
> + adap->fe[0]->ops.set_frontend(adap->fe[0]);
> + return priv->init(fe);
> +}
> +
> static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
> {
> int ret;
> @@ -818,7 +856,48 @@ static int rtl2832u_frontend_attach(struct
> dvb_usb_adapter *adap)
> /* set fe callback */
> adap->fe[0]->callback = rtl2832u_frontend_callback;
>
> + if (priv->slave_demod) {
> + struct i2c_board_info info = {};
> + struct i2c_client *client;
> +
> + /*
> + * We continue on reduced mode, without DVB-T2/C, using master
> + * demod, when slave demod fails.
> + */
> + ret = 0;
> +
> + /* attach slave demodulator */
> + if (priv->slave_demod == SLAVE_DEMOD_MN88472) {
> + struct mn88472_config mn88472_config = {};
> +
> + mn88472_config.fe = &adap->fe[1];
> + mn88472_config.i2c_wr_max = 22,
> + strlcpy(info.type, "mn88472", I2C_NAME_SIZE);
> + info.addr = 0x18;
> + info.platform_data = &mn88472_config;
> + request_module(info.type);
> + client = i2c_new_device(priv->demod_i2c_adapter, &info);
> + if (client == NULL || client->dev.driver == NULL) {
> + priv->slave_demod = SLAVE_DEMOD_NONE;
> + goto err_slave_demod_failed;
> + }
> +
> + if (!try_module_get(client->dev.driver->owner)) {
> + i2c_unregister_device(client);
> + priv->slave_demod = SLAVE_DEMOD_NONE;
> + goto err_slave_demod_failed;
> + }
> +
> + priv->i2c_client_slave_demod = client;
> + }
> +
> + /* override init as we want configure RTL2832 as TS input */
> + priv->init = adap->fe[1]->ops.init;
> + adap->fe[1]->ops.init = rtl28xxu_mn88472_init;
> + }
> +
> return 0;
> +err_slave_demod_failed:
> err:
> dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
> return ret;
> @@ -1024,25 +1103,19 @@ static int rtl2832u_tuner_attach(struct
> dvb_usb_adapter *adap)
> &rtl28xxu_rtl2832_r820t_config, NULL);
> break;
> case TUNER_RTL2832_R828D:
> - /* power off mn88472 demod on GPIO0 */
> - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x00, 0x01);
> - if (ret)
> - goto err;
> -
> - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x01);
> - if (ret)
> - goto err;
> -
> - ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x01, 0x01);
> - if (ret)
> - goto err;
> -
> - fe = dvb_attach(r820t_attach, adap->fe[0], &d->i2c_adap,
> + fe = dvb_attach(r820t_attach, adap->fe[0],
> + priv->demod_i2c_adapter,
> &rtl2832u_r828d_config);
> -
> - /* Use tuner to get the signal strength */
> adap->fe[0]->ops.read_signal_strength =
> adap->fe[0]->ops.tuner_ops.get_rf_strength;
> +
> + if (adap->fe[1]) {
> + fe = dvb_attach(r820t_attach, adap->fe[1],
> + priv->demod_i2c_adapter,
> + &rtl2832u_r828d_config);
> + adap->fe[1]->ops.read_signal_strength =
> +
> adap->fe[1]->ops.tuner_ops.get_rf_strength;
> + }
> break;
> default:
> dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME,
> @@ -1097,11 +1170,19 @@ err:
> static void rtl28xxu_exit(struct dvb_usb_device *d)
> {
> struct rtl28xxu_priv *priv = d->priv;
> - struct i2c_client *client = priv->client;
> + struct i2c_client *client;
>
> dev_dbg(&d->udev->dev, "%s:\n", __func__);
>
> /* remove I2C tuner */
> + client = priv->client;
> + if (client) {
> + module_put(client->dev.driver->owner);
> + i2c_unregister_device(client);
> + }
> +
> + /* remove I2C slave demod */
> + client = priv->i2c_client_slave_demod;
> if (client) {
> module_put(client->dev.driver->owner);
> i2c_unregister_device(client);
> diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
> b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
> index a26cab1..58f2730 100644
> --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
> +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.h
> @@ -58,6 +58,11 @@ struct rtl28xxu_priv {
> struct i2c_adapter *demod_i2c_adapter;
> bool rc_active;
> struct i2c_client *client;
> + struct i2c_client *i2c_client_slave_demod;
> + int (*init)(struct dvb_frontend *fe);
> + #define SLAVE_DEMOD_NONE 0
> + #define SLAVE_DEMOD_MN88472 1
> + unsigned int slave_demod:1;
> };
>
> enum rtl28xxu_chip_id {
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
