Hi Jacek,
On Wed, Dec 03, 2014 at 05:06:40PM +0100, Jacek Anaszewski wrote:
> This patch adds led-flash support to Maxim max77693 chipset.
> A device can be exposed to user space through LED subsystem
> sysfs interface. Device supports up to two leds which can
> work in flash and torch mode. The leds can be triggered
> externally or by software.
>
> Signed-off-by: Jacek Anaszewski <j.anaszew...@samsung.com>
> Signed-off-by: Andrzej Hajda <a.ha...@samsung.com>
> Acked-by: Kyungmin Park <kyungmin.p...@samsung.com>
> Cc: Bryan Wu <coolo...@gmail.com>
> Cc: Richard Purdie <rpur...@rpsys.net>
> Cc: Lee Jones <lee.jo...@linaro.org>
> Cc: Chanwoo Choi <cw00.c...@samsung.com>
> ---
> drivers/leds/Kconfig | 10 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-max77693.c | 1023
> ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 1034 insertions(+)
> create mode 100644 drivers/leds/leds-max77693.c
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index fa8021e..2e66d55 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -463,6 +463,16 @@ config LEDS_TCA6507
> LED driver chips accessed via the I2C bus.
> Driver support brightness control and hardware-assisted blinking.
>
> +config LEDS_MAX77693
> + tristate "LED support for MAX77693 Flash"
> + depends on LEDS_CLASS_FLASH
> + depends on MFD_MAX77693
> + depends on OF
> + help
> + This option enables support for the flash part of the MAX77693
> + multifunction device. It has build in control for two leds in flash
> + and torch mode.
> +
> config LEDS_MAX8997
> tristate "LED support for MAX8997 PMIC"
> depends on LEDS_CLASS && MFD_MAX8997
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index cbba921..57ca62b 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -52,6 +52,7 @@ obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
> obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
> obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
> obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
> +obj-$(CONFIG_LEDS_MAX77693) += leds-max77693.o
> obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
> obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o
> obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
> diff --git a/drivers/leds/leds-max77693.c b/drivers/leds/leds-max77693.c
> new file mode 100644
> index 0000000..67a2f8f
> --- /dev/null
> +++ b/drivers/leds/leds-max77693.c
> @@ -0,0 +1,1023 @@
> +/*
> + * LED Flash class driver for the flash cell of max77693 mfd.
> + *
> + * Copyright (C) 2014, Samsung Electronics Co., Ltd.
> + *
> + * Authors: Jacek Anaszewski <j.anaszew...@samsung.com>
> + * Andrzej Hajda <a.ha...@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + */
> +
> +#include <asm/div64.h>
> +#include <linux/led-class-flash.h>
> +#include <linux/mfd/max77693.h>
> +#include <linux/mfd/max77693-private.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/workqueue.h>
> +
> +#define MODE_OFF 0
> +#define MODE_FLASH1 (1 << 0)
> +#define MODE_FLASH2 (1 << 1)
> +#define MODE_TORCH1 (1 << 2)
> +#define MODE_TORCH2 (1 << 3)
> +#define MODE_FLASH_EXTERNAL1 (1 << 4)
> +#define MODE_FLASH_EXTERNAL2 (1 << 5)
You could do this based on an argument (led number). E.g.
#define MODE_FLASH_EXTERNAL(a) (1 << (4 + a))
> +#define MODE_FLASH (MODE_FLASH1 | MODE_FLASH2 | \
> + MODE_FLASH_EXTERNAL1 | MODE_FLASH_EXTERNAL2)
> +
> +#define FLED1_IOUT (1 << 0)
> +#define FLED2_IOUT (1 << 1)
> +
> +enum {
> + FLED1,
> + FLED2
> +};
> +
> +enum {
> + FLASH,
> + TORCH
> +};
> +
> +struct max77693_sub_led {
> + struct led_classdev_flash ldev;
> + struct work_struct work_brightness_set;
> +
> + unsigned int torch_brightness;
> + unsigned int flash_timeout;
> +};
> +
> +struct max77693_led {
As this does not refer to a device, how about struct max77693_device, for
instance?
> + struct regmap *regmap;
> + struct platform_device *pdev;
> + struct max77693_led_platform_data *pdata;
> + struct mutex lock;
> +
> + struct max77693_sub_led sub_leds[2];
> +
> + unsigned int current_flash_timeout;
> + unsigned int mode_flags;
> + u8 torch_iout_reg;
> + bool iout_joint;
> + int strobing_sub_led_id;
> +};
> +
> +struct max77693_led_settings {
> + struct led_flash_setting torch_brightness;
> + struct led_flash_setting flash_brightness;
> + struct led_flash_setting flash_timeout;
> +};
> +
> +static u8 max77693_led_iout_to_reg(u32 ua)
> +{
> + if (ua < FLASH_IOUT_MIN)
> + ua = FLASH_IOUT_MIN;
> + return (ua - FLASH_IOUT_MIN) / FLASH_IOUT_STEP;
> +}
> +
> +static u8 max77693_flash_timeout_to_reg(u32 us)
> +{
> + return (us - FLASH_TIMEOUT_MIN) / FLASH_TIMEOUT_STEP;
> +}
> +
> +static inline struct max77693_led *ldev1_to_led(
> + struct led_classdev_flash *ldev)
> +{
> + struct max77693_sub_led *sub_led = container_of(ldev,
> + struct max77693_sub_led,
> + ldev);
> + return container_of(sub_led, struct max77693_led, sub_leds[0]);
You could have a common macro to find the flash controller struct if you add
the LED number to struct max77693_sub_led.
> +}
> +
> +static inline struct max77693_led *ldev2_to_led(
> + struct led_classdev_flash *ldev)
> +{
> + struct max77693_sub_led *sub_led = container_of(ldev,
> + struct max77693_sub_led,
> + ldev);
> + return container_of(sub_led, struct max77693_led, sub_leds[1]);
> +}
> +
> +static u8 max77693_led_vsys_to_reg(u32 mv)
> +{
> + return ((mv - MAX_FLASH1_VSYS_MIN) / MAX_FLASH1_VSYS_STEP) << 2;
> +}
> +
> +static u8 max77693_led_vout_to_reg(u32 mv)
> +{
> + return (mv - FLASH_VOUT_MIN) / FLASH_VOUT_STEP + FLASH_VOUT_RMIN;
> +}
> +
> +/* split composite current @i into two @iout according to @imax weights */
What do you intend to do in the oint iout mode? A single LED connected to
iout pins which are soldered together?
> +static void max77693_calc_iout(u32 iout[2], u32 i, u32 imax[2])
> +{
> + u64 t = i;
> +
> + t *= imax[1];
> + do_div(t, imax[0] + imax[1]);
> +
> + iout[1] = (u32)t / FLASH_IOUT_STEP * FLASH_IOUT_STEP;
> + iout[0] = i - iout[1];
> +}
> +
> +static int max77693_set_mode(struct max77693_led *led, unsigned int mode)
> +{
> + struct max77693_led_platform_data *p = led->pdata;
> + struct regmap *rmap = led->regmap;
> + int ret, v = 0;
> +
> + if (mode & MODE_TORCH1) {
> + if (p->trigger[FLED1] & MAX77693_LED_TRIG_SOFT)
> + v |= FLASH_EN_ON << TORCH_EN_SHIFT(1);
> + }
> +
> + if (mode & MODE_TORCH2) {
> + if (p->trigger[FLED2] & MAX77693_LED_TRIG_SOFT)
> + v |= FLASH_EN_ON << TORCH_EN_SHIFT(2);
> + }
The above could be turned to a loop from 0 to 1, as you have two LEDs.Just
the MODE_* macro misses the argument.
> +
> + if (mode & MODE_FLASH1) {
> + if (p->trigger[FLED1] & MAX77693_LED_TRIG_SOFT)
> + v |= FLASH_EN_ON << FLASH_EN_SHIFT(1);
> + } else if (mode & MODE_FLASH_EXTERNAL1) {
> + if (p->trigger[FLED1] & MAX77693_LED_TRIG_EXT)
> + v |= FLASH_EN_FLASH << FLASH_EN_SHIFT(2);
> + /*
> + * Enable hw triggering also for torch mode, as some camera
> + * sensors use torch led to fathom ambient light conditions
> + * before strobing the flash.
> + */
> + if (p->trigger[FLED1] & MAX77693_LED_TRIG_EXT)
> + v |= FLASH_EN_TORCH << TORCH_EN_SHIFT(1);
> + }
> +
> + if (mode & MODE_FLASH2) {
> + if (p->trigger[FLED2] & MAX77693_LED_TRIG_SOFT)
> + v |= FLASH_EN_ON << FLASH_EN_SHIFT(2);
> + } else if (mode & MODE_FLASH_EXTERNAL2) {
> + if (p->trigger[FLED2] & MAX77693_LED_TRIG_EXT)
> + v |= FLASH_EN_FLASH << FLASH_EN_SHIFT(2);
> + /*
> + * Enable hw triggering also for torch mode, as some camera
> + * sensors use torch led to fathom ambient light conditions
> + * before strobing the flash.
> + */
> + if (p->trigger[FLED2] & MAX77693_LED_TRIG_EXT)
> + v |= FLASH_EN_TORCH << TORCH_EN_SHIFT(2);
> + }
Same here.
> + /* Reset the register only prior setting flash modes */
> + if (mode & ~(MODE_TORCH1 | MODE_TORCH2)) {
> + ret = regmap_write(rmap, MAX77693_LED_REG_FLASH_EN, 0);
> + if (ret < 0)
> + return ret;
> + }
> +
> + return regmap_write(rmap, MAX77693_LED_REG_FLASH_EN, v);
> +}
> +
> +static void max77693_set_sync_strobe(struct max77693_led *led,
> + unsigned int *mode)
> +{
> + struct max77693_sub_led *sub_leds = led->sub_leds;
> + struct led_classdev_flash *flash;
> + unsigned int m = *mode;
> +
> + /*
> + * If there are two leds then check if the other one
> + * wants to be strobed simultaneously.
> + */
> + if (!led->iout_joint) {
if (led->iout_joint)
return;
And you can more the rest left by one tab.
> + if (m & (MODE_FLASH1 | MODE_FLASH_EXTERNAL1)) {
I think this matters only software strobe. The hardware strobe works this
way automatically --- or I'd guess so at least.
> + flash = &sub_leds[FLED2].ldev;
> + if (flash->sync_strobe)
> + m |= m << 1;
> + } else if (m & (MODE_FLASH2 | MODE_FLASH_EXTERNAL2)) {
> + flash = &sub_leds[FLED1].ldev;
> + if (flash->sync_strobe)
> + m |= m >> 1;
> + }
> + }
> +
> + *mode = m;
> +}
> +
> +static int max77693_add_mode(struct max77693_led *led, unsigned int mode)
> +{
> + int ret;
> +
> + /* Span the mode on FLED2 for joint iouts case */
> + if (led->iout_joint)
> + mode |= (mode << 1);
> +
> + /*
> + * Torch mode once enabled remains active until turned off,
> + * and thus no action is required in this case.
> + */
> + if ((mode & MODE_TORCH1) &&
> + (led->mode_flags & MODE_TORCH1))
> + return 0;
> + if ((mode & MODE_TORCH2) &&
> + (led->mode_flags & MODE_TORCH2))
> + return 0;
> +
> + /* Span a flash mode on the other led if it is to be synchronized */
> + max77693_set_sync_strobe(led, &mode);
> +
> + /*
> + * FLASH_EXTERNAL mode activates FLASHEN and TORCHEN pins
> + * in the device. The related register settings interfere
> + * with SW triggerred modes, thus clear them to ensure proper
> + * device configuration.
> + */
> + if (mode & MODE_FLASH_EXTERNAL1)
> + led->mode_flags &= (~MODE_TORCH1 & ~MODE_FLASH1);
> + if (mode & MODE_FLASH_EXTERNAL2)
> + led->mode_flags &= (~MODE_TORCH2 & ~MODE_FLASH2);
> +
> + led->mode_flags |= mode;
> +
> + ret = max77693_set_mode(led, led->mode_flags);
> + if (ret < 0)
> + return ret;
> +
> + /*
> + * Clear flash mode flag after setting the mode to avoid
> + * spurious flash strobing on every subsequent torch mode
> + * setting.
> + */
> + if (mode & MODE_FLASH)
> + led->mode_flags &= ~mode;
> +
> + return ret;
> +}
> +
> +static int max77693_clear_mode(struct max77693_led *led, unsigned int mode)
> +{
> + int ret;
> +
> + if (led->iout_joint)
> + /* Clear mode also on FLED2 for joint iouts case */
> + mode |= (mode << 1);
> + else
> + /*
> + * Clear a flash mode on the other led
> + * if it is to be synchronized.
> + */
> + max77693_set_sync_strobe(led, &mode);
> +
> + led->mode_flags &= ~mode;
> +
> + ret = max77693_set_mode(led, led->mode_flags);
> +
> + return ret;
> +}
> +
> +static int max77693_set_torch_current(struct max77693_led *led,
> + int led_id, u32 micro_amp)
> +{
> + struct max77693_led_platform_data *p = led->pdata;
> + struct regmap *rmap = led->regmap;
> + u32 iout[2], iout_max[2];
> + u8 iout1_reg = 0, iout2_reg = 0;
> +
> + iout_max[FLED1] = p->iout_torch[FLED1];
> + iout_max[FLED2] = p->iout_torch[FLED2];
> +
> + if (led_id == FLED1) {
> + /*
> + * Preclude splitting current to FLED2 if we
> + * are driving two separate leds.
> + */
> + if (!led->iout_joint)
> + iout_max[FLED2] = 0;
> + max77693_calc_iout(iout, micro_amp, iout_max);
> + } else if (led_id == FLED2) {
> + iout_max[FLED1] = 0;
> + max77693_calc_iout(iout, micro_amp, iout_max);
> + }
> +
> + if (led_id == FLED1 || led->iout_joint) {
> + iout1_reg = max77693_led_iout_to_reg(iout[FLED1]);
> + led->torch_iout_reg &= 0xf0;
> + }
> + if (led_id == FLED2 || led->iout_joint) {
> + iout2_reg = max77693_led_iout_to_reg(iout[FLED2]);
> + led->torch_iout_reg &= 0x0f;
> + }
> +
> + led->torch_iout_reg |= ((iout1_reg << TORCH_IOUT1_SHIFT) |
> + (iout2_reg << TORCH_IOUT2_SHIFT));
> +
> + return regmap_write(rmap, MAX77693_LED_REG_ITORCH,
> + led->torch_iout_reg);
> +}
> +
> +static int max77693_set_flash_current(struct max77693_led *led,
> + int led_id,
> + u32 micro_amp)
> +{
> + struct max77693_led_platform_data *p = led->pdata;
> + struct regmap *rmap = led->regmap;
> + u32 iout[2], iout_max[2];
> + u8 iout1_reg, iout2_reg;
> + int ret = -EINVAL;
> +
> + iout_max[FLED1] = p->iout_flash[FLED1];
> + iout_max[FLED2] = p->iout_flash[FLED2];
> +
> + if (led_id == FLED1) {
> + /*
> + * Preclude splitting current to FLED2 if we
> + * are driving two separate leds.
> + */
> + if (!led->iout_joint)
> + iout_max[FLED2] = 0;
> + max77693_calc_iout(iout, micro_amp, iout_max);
> + } else if (led_id == FLED2) {
> + iout_max[FLED1] = 0;
> + max77693_calc_iout(iout, micro_amp, iout_max);
> + }
> +
> + if (led_id == FLED1 || led->iout_joint) {
> + iout1_reg = max77693_led_iout_to_reg(iout[FLED1]);
> + ret = regmap_write(rmap, MAX77693_LED_REG_IFLASH1,
> + iout1_reg);
> + if (ret < 0)
> + return ret;
> + }
> + if (led_id == FLED2 || led->iout_joint) {
> + iout2_reg = max77693_led_iout_to_reg(iout[FLED2]);
> + ret = regmap_write(rmap, MAX77693_LED_REG_IFLASH2,
> + iout2_reg);
> + }
> +
> + return ret;
> +}
> +
> +static int max77693_set_timeout(struct max77693_led *led, u32 timeout)
> +{
> + struct max77693_led_platform_data *p = led->pdata;
> + struct regmap *rmap = led->regmap;
> + u8 v;
> + int ret;
> +
> + v = max77693_flash_timeout_to_reg(timeout);
> +
> + if (p->trigger_type[FLASH] == MAX77693_LED_TRIG_TYPE_LEVEL)
> + v |= FLASH_TMR_LEVEL;
> +
> + ret = regmap_write(rmap, MAX77693_LED_REG_FLASH_TIMER, v);
> + if (ret < 0)
> + return ret;
> +
> + led->current_flash_timeout = timeout;
> +
> + return 0;
> +}
> +
> +static int max77693_strobe_status_get(struct max77693_led *led, bool *state)
> +{
> + struct regmap *rmap = led->regmap;
> + unsigned int v;
> + int ret;
> +
> + ret = regmap_read(rmap, MAX77693_LED_REG_FLASH_STATUS, &v);
> + if (ret < 0)
> + return ret;
> +
> + *state = v & FLASH_STATUS_FLASH_ON;
> +
> + return ret;
> +}
> +
> +static int max77693_int_flag_get(struct max77693_led *led, unsigned int *v)
> +{
> + struct regmap *rmap = led->regmap;
> +
> + return regmap_read(rmap, MAX77693_LED_REG_FLASH_INT, v);
> +}
> +
> +static int max77693_setup(struct max77693_led *led)
> +{
> + struct max77693_led_platform_data *p = led->pdata;
> + struct regmap *rmap = led->regmap;
> + int i, first_led, last_led, ret;
> + u32 max_flash_curr[2];
> + u8 v;
> +
> + /*
> + * Initialize only flash current. Torch current doesn't
> + * require initialization as ITORCH register is written with
> + * new value each time brightness_set op is called.
> + */
> + if (led->iout_joint) {
> + first_led = FLED1;
> + last_led = FLED1;
> + max_flash_curr[FLED1] = p->iout_flash[FLED1] +
> + p->iout_flash[FLED2];
> + } else {
> + first_led = p->fleds[FLED1] ? FLED1 : FLED2;
> + last_led = p->num_leds == 2 ? FLED2 : first_led;
> + max_flash_curr[FLED1] = p->iout_flash[FLED1];
> + max_flash_curr[FLED2] = p->iout_flash[FLED2];
> + }
> +
> + for (i = first_led; i <= last_led; ++i) {
> + ret = max77693_set_flash_current(led, i,
> + max_flash_curr[i]);
> + if (ret < 0)
> + return ret;
> + }
> +
> + v = TORCH_TMR_NO_TIMER | MAX77693_LED_TRIG_TYPE_LEVEL;
> + ret = regmap_write(rmap, MAX77693_LED_REG_ITORCHTIMER, v);
> + if (ret < 0)
> + return ret;
> +
> + /* initially set FLED1 timeout */
> + ret = max77693_set_timeout(led, p->flash_timeout[FLED1]);
> + if (ret < 0)
> + return ret;
> +
> + if (p->low_vsys > 0)
> + v = max77693_led_vsys_to_reg(p->low_vsys) |
> + MAX_FLASH1_MAX_FL_EN;
> + else
> + v = 0;
> +
> + ret = regmap_write(rmap, MAX77693_LED_REG_MAX_FLASH1, v);
> + if (ret < 0)
> + return ret;
> + ret = regmap_write(rmap, MAX77693_LED_REG_MAX_FLASH2, 0);
> + if (ret < 0)
> + return ret;
> +
> + if (p->boost_mode == MAX77693_LED_BOOST_FIXED)
> + v = FLASH_BOOST_FIXED;
> + else
> + v = p->boost_mode | p->boost_mode << 1;
> + if (p->fleds[FLED1] && p->fleds[FLED2])
> + v |= FLASH_BOOST_LEDNUM_2;
> + ret = regmap_write(rmap, MAX77693_LED_REG_VOUT_CNTL, v);
> + if (ret < 0)
> + return ret;
> +
> + v = max77693_led_vout_to_reg(p->boost_vout);
> + ret = regmap_write(rmap, MAX77693_LED_REG_VOUT_FLASH1, v);
> + if (ret < 0)
> + return ret;
> +
> + return max77693_set_mode(led, MODE_OFF);
> +}
> +
> +static int max77693_led_brightness_set(struct max77693_led *led,
> + int led_id, enum led_brightness value)
> +{
> + int ret;
> +
> + mutex_lock(&led->lock);
> +
> + if (value == 0) {
> + ret = max77693_clear_mode(led, MODE_TORCH1 << led_id);
> + if (ret < 0)
> + dev_dbg(&led->pdev->dev,
> + "Failed to clear torch mode (%d)\n",
> + ret);
> + goto unlock;
> + }
> +
> + ret = max77693_set_torch_current(led, led_id, value * TORCH_IOUT_STEP);
> + if (ret < 0) {
> + dev_dbg(&led->pdev->dev,
> + "Failed to set torch current (%d)\n",
> + ret);
> + goto unlock;
> + }
> +
> + ret = max77693_add_mode(led, MODE_TORCH1 << led_id);
> + if (ret < 0)
> + dev_dbg(&led->pdev->dev,
> + "Failed to set torch mode (%d)\n",
> + ret);
> +unlock:
> + mutex_unlock(&led->lock);
> + return ret;
> +}
> +
> +#define MAX77693_LED_BRIGHTNESS_SET_WORK(ID) \
> +static void max77693_led##ID##_brightness_set_work( \
> + struct work_struct *work) \
> +{ \
> + struct max77693_sub_led *sub_led = \
> + container_of(work, struct max77693_sub_led, \
> + work_brightness_set); \
> + struct max77693_led *led = container_of(sub_led, \
> + struct max77693_led, \
> + sub_leds[FLED##ID]); \
> + struct max77693_sub_led *sub_leds = led->sub_leds; \
> + \
> + max77693_led_brightness_set(led, FLED##ID, \
> + sub_leds[FLED##ID].torch_brightness); \
> +}
> +
> +/* LED subsystem callbacks */
> +
> +#define MAX77693_LED_TORCH_BRIGHTNESS_SET(ID)
> \
> +static int max77693_led##ID##_brightness_set_sync( \
> + struct led_classdev *led_cdev, \
> + enum led_brightness value) \
> +{ \
> + struct led_classdev_flash *flash = lcdev_to_flash(led_cdev); \
> + struct max77693_led *led = ldev##ID##_to_led(flash); \
> + \
> + return max77693_led_brightness_set(led, FLED##ID, value); \
> +}
> +
> +#define MAX77693_LED_BRIGHTNESS_SET(ID)
> \
> +static void max77693_led##ID##_brightness_set(
> \
> + struct led_classdev *led_cdev, \
> + enum led_brightness value) \
> +{ \
> + struct led_classdev_flash *flash = lcdev_to_flash(led_cdev); \
> + struct max77693_led *led = ldev##ID##_to_led(flash); \
> + struct max77693_sub_led *sub_leds = led->sub_leds; \
> + \
> + sub_leds[FLED##ID].torch_brightness = value; \
> + schedule_work(&sub_leds[FLED##ID].work_brightness_set); \
> +}
> +
> +#define MAX77693_LED_FLASH_BRIGHTNESS_SET(ID)
> \
> +static int max77693_led##ID##_flash_brightness_set( \
> + struct led_classdev_flash *flash, \
> + u32 brightness) \
> +{ \
> + struct max77693_led *led = ldev##ID##_to_led(flash); \
> + int ret; \
> + \
> + mutex_lock(&led->lock); \
> + ret = max77693_set_flash_current(led, FLED##ID, brightness); \
> + mutex_unlock(&led->lock); \
> + \
> + return ret; \
> +}
> +
> +#define MAX77693_LED_FLASH_STROBE_SET(ID) \
> +static int max77693_led##ID##_flash_strobe_set(
> \
> + struct led_classdev_flash *flash, \
> + bool state) \
> +{ \
> + struct max77693_led *led = ldev##ID##_to_led(flash); \
> + struct max77693_sub_led *sub_leds = led->sub_leds; \
> + int ret; \
> + \
> + mutex_lock(&led->lock); \
> + \
> + if (!state) { \
> + ret = max77693_clear_mode(led, MODE_FLASH##ID); \
> + goto unlock; \
> + } \
> + \
> + if (sub_leds[FLED##ID].flash_timeout != \
> + led->current_flash_timeout) { \
> + ret = max77693_set_timeout(led, \
> + sub_leds[FLED##ID].flash_timeout); \
> + if (ret < 0) \
> + goto unlock; \
> + } \
> + \
> + led->strobing_sub_led_id = ID; \
> + \
> + ret = max77693_add_mode(led, MODE_FLASH##ID); \
> + \
> +unlock:
> \
> + mutex_unlock(&led->lock); \
> + return ret; \
> +}
> +
> +#define MAX77693_LED_FLASH_FAULT_GET(ID) \
> +static int max77693_led##ID##_flash_fault_get(
> \
> + struct led_classdev_flash *flash, \
> + u32 *fault) \
> +{ \
> + struct max77693_led *led = ldev##ID##_to_led(flash); \
> + unsigned int v; \
> + int ret; \
> + \
> + ret = max77693_int_flag_get(led, &v); \
> + if (ret < 0) \
> + return ret; \
> + \
> + *fault = 0; \
> + \
> + if (v & FLASH_INT_FLED##ID##_OPEN) \
> + *fault |= LED_FAULT_OVER_VOLTAGE; \
> + if (v & FLASH_INT_FLED##ID##_SHORT) \
> + *fault |= LED_FAULT_SHORT_CIRCUIT; \
> + if (v & FLASH_INT_OVER_CURRENT) \
> + *fault |= LED_FAULT_OVER_CURRENT; \
> + \
> + return 0; \
> +}
> +
> +#define MAX77693_LED_FLASH_STROBE_GET(ID) \
> +static int max77693_led##ID##_flash_strobe_get(
> \
> + struct led_classdev_flash *flash, \
> + bool *state) \
> +{ \
> + struct max77693_led *led = ldev##ID##_to_led(flash); \
> + int ret; \
> + \
> + if (!state) \
> + return -EINVAL; \
> + \
> + mutex_lock(&led->lock); \
> + \
> + ret = max77693_strobe_status_get(led, state); \
> + \
> + *state = !!(*state && led->strobing_sub_led_id == ID); \
> + \
> + mutex_unlock(&led->lock); \
> + \
> + return ret; \
> +}
> +
> +#define MAX77693_LED_FLASH_TIMEOUT_SET(ID) \
> +static int max77693_led##ID##_flash_timeout_set( \
> + struct led_classdev_flash *flash, \
> + u32 timeout) \
> +{ \
> + struct max77693_led *led = ldev##ID##_to_led(flash); \
> + struct max77693_sub_led *sub_leds = led->sub_leds; \
> + \
> + mutex_lock(&led->lock); \
> + sub_leds[FLED##ID].flash_timeout = timeout; \
> + mutex_unlock(&led->lock); \
> + \
> + return 0; \
> +}
> +
> +MAX77693_LED_BRIGHTNESS_SET(1)
> +MAX77693_LED_BRIGHTNESS_SET_WORK(1)
> +MAX77693_LED_TORCH_BRIGHTNESS_SET(1)
> +MAX77693_LED_FLASH_BRIGHTNESS_SET(1)
> +MAX77693_LED_FLASH_STROBE_SET(1)
> +MAX77693_LED_FLASH_STROBE_GET(1)
> +MAX77693_LED_FLASH_TIMEOUT_SET(1)
> +MAX77693_LED_FLASH_FAULT_GET(1)
> +
> +MAX77693_LED_BRIGHTNESS_SET(2)
> +MAX77693_LED_BRIGHTNESS_SET_WORK(2)
> +MAX77693_LED_TORCH_BRIGHTNESS_SET(2)
> +MAX77693_LED_FLASH_BRIGHTNESS_SET(2)
> +MAX77693_LED_FLASH_STROBE_SET(2)
> +MAX77693_LED_FLASH_STROBE_GET(2)
> +MAX77693_LED_FLASH_TIMEOUT_SET(2)
> +MAX77693_LED_FLASH_FAULT_GET(2)
You could implement these without the help of macros so that the function
gets the LED number from its arguments, directly or indirectly.
> +static int max77693_led_parse_dt(struct max77693_led *led,
> + struct device_node *node)
> +{
> + struct max77693_led_platform_data *p = led->pdata;
> + struct device *dev = &led->pdev->dev;
> + struct device_node *child_node;
> + u32 fled_id;
> + int ret;
> +
> + of_property_read_u32_array(node, "maxim,fleds", p->fleds, 2);
> + of_property_read_u32_array(node, "maxim,trigger", p->trigger, 2);
> + of_property_read_u32_array(node, "maxim,trigger-type", p->trigger_type,
> + 2);
> + of_property_read_u32(node, "maxim,boost-mode", &p->boost_mode);
> + of_property_read_u32(node, "maxim,boost-vout", &p->boost_vout);
> + of_property_read_u32(node, "maxim,vsys-min", &p->low_vsys);
> +
> + for_each_available_child_of_node(node, child_node) {
> + ret = of_property_read_u32(child_node, "maxim,fled_id",
> + &fled_id);
> + if (ret < 0) {
> + dev_err(dev, "Error reading \"fled_id\" DT property\n");
> + return ret;
> + }
> +
> + fled_id = clamp_val(fled_id, 1, 2);
I think you should check fled_id is really correct, and not clamp it.
> + --fled_id;
> +
> + p->sub_nodes[fled_id] = child_node;
p->sub_nodes is not accessed anywhere else. Do you plan to use it for
something?
> +
> + ret = of_property_read_string(child_node, "label",
> + (const char **) &p->label[fled_id]);
> + if (ret < 0) {
> + dev_err(dev, "Error reading \"label\" DT property\n");
> + return ret;
> + }
> +
> + of_property_read_u32(child_node, "max-microamp",
> + &p->iout_torch[fled_id]);
> + of_property_read_u32(child_node, "flash-max-microamp",
> + &p->iout_flash[fled_id]);
> + of_property_read_u32(child_node, "flash-timeout-microsec",
> + &p->flash_timeout[fled_id]);
> + if (++p->num_leds == 2)
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static void clamp_align(u32 *v, u32 min, u32 max, u32 step)
> +{
> + *v = clamp_val(*v, min, max);
> + if (step > 1)
> + *v = (*v - min) / step * step + min;
> +}
> +
> +static void max77693_led_validate_platform_data(
> + struct max77693_led_platform_data *p)
> +{
> + u32 max;
> + int i;
> +
> + p->boost_mode = clamp_val(p->boost_mode, MAX77693_LED_BOOST_NONE,
> + MAX77693_LED_BOOST_FIXED);
> +
> + for (i = 0; i < ARRAY_SIZE(p->fleds); ++i)
> + p->fleds[i] = clamp_val(p->fleds[i], 0, 1);
> +
> + /* Ensure fleds configuration is sane */
> + if (!p->fleds[FLED1] && !p->fleds[FLED2]) {
> + p->fleds[FLED1] = p->fleds[FLED2] = 1;
> + p->num_leds = 1;
> + }
> +
> + /* Ensure num_leds is consistent with fleds configuration */
> + if ((!p->fleds[FLED1] || !p->fleds[FLED2]) && p->num_leds == 2)
> + p->num_leds = 1;
> +
> + /*
> + * boost must be enabled if current outputs
> + * are connected to separate leds.
> + */
> + if ((p->num_leds == 2 || (p->fleds[FLED1] && p->fleds[FLED2])) &&
> + p->boost_mode == MAX77693_LED_BOOST_NONE)
> + p->boost_mode = MAX77693_LED_BOOST_FIXED;
> +
> + max = p->boost_mode ? FLASH_IOUT_MAX_2LEDS : FLASH_IOUT_MAX_1LED;
> +
> + if (p->fleds[FLED1]) {
> + clamp_align(&p->iout_torch[FLED1], TORCH_IOUT_MIN,
> + TORCH_IOUT_MAX, TORCH_IOUT_STEP);
> + clamp_align(&p->iout_flash[FLED1], FLASH_IOUT_MIN, max,
> + FLASH_IOUT_STEP);
> + } else {
> + p->iout_torch[FLED1] = p->iout_flash[FLED1] = 0;
> + }
> + if (p->fleds[FLED2]) {
> + clamp_align(&p->iout_torch[FLED2], TORCH_IOUT_MIN,
> + TORCH_IOUT_MAX, TORCH_IOUT_STEP);
> + clamp_align(&p->iout_flash[FLED2], FLASH_IOUT_MIN, max,
> + FLASH_IOUT_STEP);
> + } else {
> + p->iout_torch[FLED2] = p->iout_flash[FLED2] = 0;
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(p->trigger); ++i)
> + p->trigger[i] = clamp_val(p->trigger[i], 0, 7);
> + for (i = 0; i < ARRAY_SIZE(p->trigger_type); ++i)
> + p->trigger_type[i] = clamp_val(p->trigger_type[i],
> + MAX77693_LED_TRIG_TYPE_EDGE,
> + MAX77693_LED_TRIG_TYPE_LEVEL);
> +
> + for (i = 0; i < ARRAY_SIZE(p->flash_timeout); ++i)
> + clamp_align(&p->flash_timeout[i], FLASH_TIMEOUT_MIN,
> + FLASH_TIMEOUT_MAX, FLASH_TIMEOUT_STEP);
> +
> + clamp_align(&p->boost_vout, FLASH_VOUT_MIN, FLASH_VOUT_MAX,
> + FLASH_VOUT_STEP);
> +
> + if (p->low_vsys)
> + clamp_align(&p->low_vsys, MAX_FLASH1_VSYS_MIN,
> + MAX_FLASH1_VSYS_MAX, MAX_FLASH1_VSYS_STEP);
> +}
> +
> +static int max77693_led_get_platform_data(struct max77693_led *led)
This isn't really platform data anymore. Could this be just "configuration",
for instance?
> +{
> + struct device *dev = &led->pdev->dev;
> + int ret;
> +
> + if (!dev->of_node)
> + return -EINVAL;
> +
> + led->pdata = devm_kzalloc(dev, sizeof(*led->pdata), GFP_KERNEL);
> + if (!led->pdata)
> + return -ENOMEM;
> +
> + ret = max77693_led_parse_dt(led, dev->of_node);
> + if (ret < 0)
> + return ret;
> +
> + max77693_led_validate_platform_data(led->pdata);
> +
> + return 0;
> +}
> +
> +#define MAX77693_LED_INIT_FLASH_OPS(ID)
> \
> +static const struct led_flash_ops flash_ops##ID = {
> \
> +
> \
> + .flash_brightness_set = max77693_led##ID##_flash_brightness_set,
> \
> + .strobe_set = max77693_led##ID##_flash_strobe_set,
> \
> + .strobe_get = max77693_led##ID##_flash_strobe_get,
> \
> + .timeout_set = max77693_led##ID##_flash_timeout_set,
> \
> + .fault_get = max77693_led##ID##_flash_fault_get,
> \
> +}
> +
> +MAX77693_LED_INIT_FLASH_OPS(1);
> +MAX77693_LED_INIT_FLASH_OPS(2);
Same here, I think you can have just a single implementation of these.
> +static void max77693_init_flash_settings(struct max77693_led *led,
> + struct max77693_led_settings *s,
> + int led_id)
> +{
> + struct max77693_led_platform_data *p = led->pdata;
> + struct led_flash_setting *setting;
> +
> + /* Init torch intensity setting */
> + setting = &s->torch_brightness;
> + setting->min = led->iout_joint ? TORCH_IOUT_MIN * 2 :
> + TORCH_IOUT_MIN;
> + setting->max = led->iout_joint ?
> + p->iout_torch[FLED1] + p->iout_torch[FLED2] :
> + p->iout_torch[led_id];
> + setting->step = TORCH_IOUT_STEP;
> + setting->val = setting->max;
> +
> + /* Init flash intensity setting */
> + setting = &s->flash_brightness;
> + setting->min = led->iout_joint ? FLASH_IOUT_MIN * 2 :
> + FLASH_IOUT_MIN;
> + setting->max = led->iout_joint ?
> + p->iout_flash[FLED1] + p->iout_flash[FLED2] :
> + p->iout_flash[led_id];
> + setting->step = FLASH_IOUT_STEP;
> + setting->val = setting->max;
> +
> + /* Init flash timeout setting */
> + setting = &s->flash_timeout;
> + setting->min = FLASH_TIMEOUT_MIN;
> + setting->max = p->flash_timeout[led_id];
> + setting->step = FLASH_TIMEOUT_STEP;
> + setting->val = setting->max;
> +}
> +
> +static int max77693_register_led(struct max77693_led *led, int id)
> +{
> + struct platform_device *pdev = led->pdev;
> + struct led_classdev_flash *flash;
> + struct led_classdev *led_cdev;
> + struct max77693_sub_led *sub_leds = led->sub_leds;
> + struct max77693_led_settings settings;
> +
> + flash = &sub_leds[id].ldev;
> +
> + /* Initialize flash settings */
> + max77693_init_flash_settings(led, &settings, id);
> +
> + /* Initialize LED Flash class device */
> + led_cdev = &flash->led_cdev;
> +
> + led_cdev->name = led->pdata->label[id];
> +
> + if (id == FLED1) {
> + led_cdev->brightness_set = max77693_led1_brightness_set;
> + led_cdev->brightness_set_sync =
> + max77693_led1_brightness_set_sync;
> + INIT_WORK(&sub_leds[id].work_brightness_set,
> + max77693_led1_brightness_set_work);
> + flash->ops = &flash_ops1;
> + } else {
> + led_cdev->brightness_set = max77693_led2_brightness_set;
> + led_cdev->brightness_set_sync =
> + max77693_led2_brightness_set_sync;
> + INIT_WORK(&sub_leds[id].work_brightness_set,
> + max77693_led2_brightness_set_work);
> + flash->ops = &flash_ops2;
> + }
> +
> + led_cdev->max_brightness = settings.torch_brightness.val /
> + TORCH_IOUT_STEP;
> + led_cdev->flags |= LED_DEV_CAP_FLASH;
> + if (led->pdata->num_leds == 2)
> + led_cdev->flags |= LED_DEV_CAP_COMPOUND;
> +
> + flash->brightness = settings.flash_brightness;
> + flash->timeout = settings.flash_timeout;
> + sub_leds[id].flash_timeout = flash->timeout.val;
> +
> + /* Register in the LED subsystem. */
> + return led_classdev_flash_register(&pdev->dev, flash);
> +}
> +
> +static int max77693_led_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct max77693_dev *iodev = dev_get_drvdata(dev->parent);
> + struct max77693_led *led;
> + struct max77693_led_platform_data *p;
> + struct max77693_sub_led *sub_leds;
> + int ret;
> +
> + led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
> + if (!led)
> + return -ENOMEM;
> +
> + led->pdev = pdev;
> + led->regmap = iodev->regmap;
> + sub_leds = led->sub_leds;
> + platform_set_drvdata(pdev, led);
> + ret = max77693_led_get_platform_data(led);
> + if (ret < 0)
> + return -EINVAL;
> +
> + p = led->pdata;
> + mutex_init(&led->lock);
> +
> + if (p->num_leds == 1 && p->fleds[FLED1] && p->fleds[FLED2])
> + led->iout_joint = true;
> +
> + ret = max77693_setup(led);
> + if (ret < 0)
> + goto err_setup;
> +
> + if (led->iout_joint || p->fleds[FLED1]) {
> + ret = max77693_register_led(led, FLED1);
> + if (ret < 0)
> + goto err_setup;
> + }
> +
> + if (!led->iout_joint && p->fleds[FLED2]) {
> + ret = max77693_register_led(led, FLED2);
> + if (ret < 0)
> + goto err_register_led2;
> + }
> +
> + return 0;
> +
> +err_register_led2:
> + if (!p->fleds[FLED1])
> + goto err_setup;
> + led_classdev_flash_unregister(&sub_leds[FLED1].ldev);
> +err_setup:
> + mutex_destroy(&led->lock);
> +
> + return ret;
> +}
> +
> +static int max77693_led_remove(struct platform_device *pdev)
> +{
> + struct max77693_led *led = platform_get_drvdata(pdev);
> + struct max77693_led_platform_data *p = led->pdata;
> + struct max77693_sub_led *sub_leds = led->sub_leds;
> +
> + if (led->iout_joint || p->fleds[FLED1]) {
> + led_classdev_flash_unregister(&sub_leds[FLED1].ldev);
> + cancel_work_sync(&sub_leds[FLED1].work_brightness_set);
> + }
> +
> + if (!led->iout_joint && p->fleds[FLED2]) {
> + led_classdev_flash_unregister(&sub_leds[FLED2].ldev);
> + cancel_work_sync(&sub_leds[FLED2].work_brightness_set);
> + }
> +
> + mutex_destroy(&led->lock);
> +
> + return 0;
> +}
> +
> +static struct of_device_id max77693_led_dt_match[] = {
> + {.compatible = "maxim,max77693-led"},
> + {},
> +};
> +
> +static struct platform_driver max77693_led_driver = {
> + .probe = max77693_led_probe,
> + .remove = max77693_led_remove,
> + .driver = {
> + .name = "max77693-led",
> + .owner = THIS_MODULE,
> + .of_match_table = max77693_led_dt_match,
> + },
> +};
> +
> +module_platform_driver(max77693_led_driver);
> +
> +MODULE_AUTHOR("Jacek Anaszewski <j.anaszew...@samsung.com>");
> +MODULE_AUTHOR("Andrzej Hajda <a.ha...@samsung.com>");
> +MODULE_DESCRIPTION("Maxim MAX77693 led flash driver");
> +MODULE_LICENSE("GPL");
--
Kind regards,
Sakari Ailus
e-mail: sakari.ai...@iki.fi XMPP: sai...@retiisi.org.uk
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
