For sama5d3xmb board, the pins: pinctrl_isi_{power,reset} is used to
power-down or reset camera sensor.
So we should let camera sensor instead of ISI to configure the pins.
This patch will change pinctrl name from pinctrl_isi_{power,reset} to
pinctrl_sensor_{power,reset}.
Signed-off-by: Josh Wu <josh...@atmel.com>
---
arch/arm/boot/dts/sama5d3.dtsi | 2 ++
arch/arm/boot/dts/sama5d3xmb.dtsi | 6 ++----
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index ed734e9..ff0fa3a 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -214,6 +214,8 @@
compatible = "atmel,at91sam9g45-isi";
reg = <0xf0034000 0x4000>;
interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_isi_data_0_7>;
clocks = <&isi_clk>;
clock-names = "isi_clk";
status = "disabled";
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi
b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 6af1cba..0aaebc6 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -60,8 +60,6 @@
};
isi: isi@f0034000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_isi_data_0_7
&pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
};
mmc1: mmc@f8000000 {
@@ -122,12 +120,12 @@
<AT91_PIOD 31
AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */
};
- pinctrl_isi_reset: isi_reset-0 {
+ pinctrl_sensor_reset: sensor_reset-0 {
atmel,pins =
<AT91_PIOE 24
AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */
};
- pinctrl_isi_power: isi_power-0 {
+ pinctrl_sensor_power: sensor_power-0 {
atmel,pins =
<AT91_PIOE 29
AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
