Understood, thank you. I will consider donating it to you after my new HVR-2200 seems stable enough.
BR >---- Mensaje original ---- >De : st...@kernellabs.com >Fecha : 04/02/2015 - 12:51 (GMT) >Para : dcr...@telefonica.net >CC : linux-media@vger.kernel.org >Asunto : Re: Re: [possible BUG, cx23885] Dual tuner TV card, works using one >tuner only, doesn't work if both tuners are used > >I didn't see anything obvious in the logs :( > >Please don't send the hardware to the US unless you're willing to >leave it with me permanently, I don't work on hardware for free if I >don't get to keep the final hardware. I hope you understand. > >- Steve > >-- >Steven Toth - Kernel Labs >http://www.kernellabs.com > >On Wed, Feb 4, 2015 at 3:30 AM, dcr...@telefonica.net ><dcr...@telefonica.net> wrote: >> Too bad. I will check anyway the export cost, just to check if it makes >> sense. >> >> BTW, did you have the chance to look at the logs I attached, just to figure >> out if something is wrong or something can be debugged at my side? I'm not >> expert in V4L stuff, but I am a programmer and could test things by myself >> if some advice or guidance is provided. Maybe there is a DVB/V4L programming >> tutorial somewhere? >> >> BR >> >>>---- Mensaje original ---- >>>De : st...@kernellabs.com >>>Fecha : 03/02/2015 - 22:40 (GMT) >>>Para : dcr...@telefonica.net >>>CC : linux-media@vger.kernel.org >>>Asunto : Re: [possible BUG, cx23885] Dual tuner TV card, works using one >>>tuner only, doesn't work if both tuners are used >>> >>>Hi, >>> >>>I'm based in the US :( >>> >>>- Steve >>> >>>-- >>>Steven Toth - Kernel Labs >>>http://www.kernellabs.com >>> >>>On Tue, Feb 3, 2015 at 4:39 PM, dCrypt <dcr...@telefonica.net> wrote: >>>> Thanks Steve. >>>> >>>> If sending it really helps you in your development, I will gladly pay for >>>> the postage forth and back if you live in Europe. >>>> >>>> When my recently purchased HVR-2200 is stable in my PVR (I could still use >>>> the Terratec disabling one tuner), I will consider donating the Terratec. >>>> >>>> BR >>>> >>>> >>>>> -----Mensaje original----- >>>>> De: Steven Toth [mailto:st...@kernellabs.com] >>>>> Enviado el: martes, 03 de febrero de 2015 20:32 >>>>> Para: dCrypt >>>>> CC: Linux-Media >>>>> Asunto: Re: [possible BUG, cx23885] Dual tuner TV card, works using one >>>>> tuner only, doesn't work if both tuners are used >>>>> >>>>> While I am the maintainer of the cx23885 driver, its currently >>>>> undergoing a significant amount of churn related to Han's recent VB2 >>>>> and other changes. I consider the current driver broken until the >>>>> feedback on the mailing list dies down. I'm reluctant to work on the >>>>> driver while its considered unstable. >>>>> >>>>> If you want to send me a Terratec card then I'll try to fund an hour to >>>>> investigate in the coming weeks. >>>>> >>>>> Best, >>>>> >>>>> - Steve >>>>> >>>>> -- >>>>> Steven Toth - Kernel Labs >>>>> http://www.kernellabs.com >>>>> >>>>> >>>>> On Tue, Feb 3, 2015 at 2:26 PM, dCrypt <dcr...@telefonica.net> wrote: >>>>> > Steve, >>>>> > >>>>> > Maybe you can help me tracking down my other card's problem, as I saw >>>>> you were owner of the (c) in the cx23885 source code. >>>>> > >>>>> > BR >>>>> > >>>>> >> -----Mensaje original----- >>>>> >> De: linux-media-ow...@vger.kernel.org [mailto:linux-media- >>>>> >> ow...@vger.kernel.org] En nombre de dCrypt >>>>> >> Enviado el: jueves, 29 de enero de 2015 1:11 >>>>> >> Para: linux-media@vger.kernel.org >>>>> >> CC: st...@linuxtv.org >>>>> >> Asunto: RE: [possible BUG, cx23885] Dual tuner TV card, works using >>>>> one >>>>> >> tuner only, doesn't work if both tuners are used >>>>> >> >>>>> >> Hi, >>>>> >> >>>>> >> I have attached four excerpts from /var/log/kern.log with debug=9 >>>>> >> option for module cx23885. The test flow is the following: >>>>> >> >>>>> >> 0) Ubuntu 14.04/kernel 3.13 just installed, latest V4L source code >>>>> >> compiled and installed Test 1.1) >>>>> >> - Reboot >>>>> >> - sudo tzap -a 0 -x -H -c channelsv3.conf "La 1 HD.", using >>>>> first >>>>> >> tuner, it locks and works >>>>> >> - log excerpt extracted -> test1.1-adap0-ok.log >>>>> >> >>>>> >> Test 1.2) >>>>> >> - sudo tzap -a 1 -x -H -c channelsv3.conf "La 1 HD.", using >>>>> >> second tuner after first tuner lock, it doesn't lock and doesn't >>>>> work >>>>> >> - log excerpt extracted -> test1.2-adap1-ko.log >>>>> >> >>>>> >> Test 2.1) >>>>> >> - Reboot >>>>> >> - sudo tzap -a 1 -x -H -c channelsv3.conf "La 1 HD.", using >>>>> >> second tuner, it locks and works >>>>> >> - log excerpt extracted -> test2.1-adap1-ok.log >>>>> >> >>>>> >> Test 2.2) >>>>> >> - sudo tzap -a 0 -x -H -c channelsv3.conf "La 1 HD.", using >>>>> first >>>>> >> tuner after second tuner lock, it doesn't lock and doesn't work >>>>> >> - log excerpt extracted -> test2.2-adap0-ko.log >>>>> >> >>>>> >> From the logs, I interpret that, after one tuner is used and locked >>>>> the >>>>> >> signal, trying to use the other tuner no IRQs are fired after >>>>> >> cx23885_start_dma(), so the driver immediately cancels buffers and >>>>> >> stops dma. However, I am not an expert and I can't follow the full >>>>> >> workflow, so I could be wrong. >>>>> >> >>>>> >> I would like to help as much as I can, but I'm afraid I need some >>>>> >> guidance. >>>>> >> >>>>> >> BR >>>>> >> >>>>> >> -----Mensaje original----- >>>>> >> De: linux-media-ow...@vger.kernel.org [mailto:linux-media- >>>>> >> ow...@vger.kernel.org] En nombre de dCrypt Enviado el: sábado, 17 de >>>>> >> enero de 2015 1:26 >>>>> >> Para: ja...@ejbdigital.com.au >>>>> >> CC: linux-media@vger.kernel.org; hverk...@xs4all.nl >>>>> >> Asunto: RE: [possible BUG, cx23885] Dual tuner TV card, works using >>>>> one >>>>> >> tuner only, doesn't work if both tuners are used >>>>> >> >>>>> >> Hi, James. >>>>> >> >>>>> >> After searching for somebody posting some issues similar to mine, I >>>>> >> think this one you posted to the mailing list can be related: >>>>> >> >>>>> >> https://www.mail-archive.com/linux- >>>>> >> media%40vger.kernel.org/msg80078.html >>>>> >> >>>>> >> I'm having problems using both tuners in a dual tuner card (Terratec >>>>> >> Cinergy T PCIe Dual), also based on cx23885, but it uses different >>>>> >> frontends/tuners than yours. >>>>> >> >>>>> >> In summary, my problem is that I started getting signal/locking >>>>> errors >>>>> >> in VDR if I tuned one frontend, and VDR scanned EIT/EPG using the >>>>> >> second tuner in the background; by disabling the second tuner it >>>>> works. >>>>> >> I managed to reproduce the problem by simply using dvbzap/dvbv5-zap >>>>> in >>>>> >> command line. And it suddenly started failing on the 1st of Dec 2014 >>>>> >> (after a frequency change in DVB-T in Spain). I tested different >>>>> Ubuntu >>>>> >> distros wich previously worked, but I can't manage to make it work >>>>> now >>>>> >> using the default kernel included in the Ubuntu ISO image that I had >>>>> >> installed. >>>>> >> >>>>> >> I am testing now with Ubuntu 15.04 nightly, kernel 3.18, in a >>>>> separate >>>>> >> hw platform. I also tested with MythTV and TVHedaend, but as I >>>>> managed >>>>> >> to reproduce it with the dvb command line tools, I don't test any >>>>> GUI >>>>> >> anymore. I've also tested it in Windows 7, and it works tuning both >>>>> >> tuners simultaneously, so I discarded a hardware problem. I've also >>>>> >> tested with the latest git from the v4l repo by following this guide >>>>> >> ("basic" approach): >>>>> >> >>>>> http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L- >>>>> >> DVB_Device_Drivers with the same result. >>>>> >> >>>>> >> My guess is that something in the cx23885 driver does not like the >>>>> >> current DVB-T signal in Spain. Is it possible that something similar >>>>> >> happened where you live? >>>>> >> >>>>> >> The problem is that I don't know how to proceed to debug the issue, >>>>> so >>>>> >> any advice is welcome. >>>>> >> >>>>> >> BR >>>>> >> >>>>> >> -----Mensaje original----- >>>>> >> De: linux-media-ow...@vger.kernel.org [mailto:linux-media- >>>>> >> ow...@vger.kernel.org] En nombre de dCrypt Enviado el: viernes, 09 >>>>> de >>>>> >> enero de 2015 8:16 >>>>> >> Para: blind Pete >>>>> >> CC: linux-media@vger.kernel.org >>>>> >> Asunto: RE: [BUG] Dual tuner TV card, works using one tuner only, >>>>> >> doesn't work if both tuners are used >>>>> >> >>>>> >> Hi, blind Pete. >>>>> >> >>>>> >> Thank you for taking your time to answer. >>>>> >> >>>>> >> Yes, I tried different kernels focusing con Ubuntu distro. I don't >>>>> >> remember the exact kernel version, but at least those included by >>>>> >> default in the Ubuntu 12.04 lts and 14.04 lts ISO image, which >>>>> worked >>>>> >> for me. The latest Ubuntu version I tested was the nightly 15.04 >>>>> from >>>>> >> the 7th of January. >>>>> >> >>>>> >> BREl 9/1/2015 4:46, blind Pete <0123pe...@gmail.com> escribió: >>>>> >> > >>>>> >> > Hi dCrypt, >>>>> >> > >>>>> >> > I'm not a developer at all. I'm not even sure why I read this >>>>> list, >>>>> >> > but can you determine if the problem is associated with a >>>>> particular >>>>> >> > kernel version? i.e. if it works on x.y.z but fails on x.y.(z+1) >>>>> you >>>>> >> > have a starting point. If you use the word "regression" and a >>>>> kernel >>>>> >> > version number you might get more attention - but I'm only >>>>> guessing. >>>>> >> > >>>>> >> > Good luck, >>>>> >> > blind Pete >>>>> >> > >>>>> >> > dCrypt wrote: >>>>> >> > >>>>> >> > > Hi again, >>>>> >> > > >>>>> >> > > I'm sorry if I sound quite rude, but I'm not sure if I am doing >>>>> it >>>>> >> > > right or not. I subscribed to this mailing list in order to ask >>>>> for >>>>> >> > > help, or to help with a bug that I've found (as instructed in >>>>> the >>>>> >> > > wiki http://linuxtv.org/wiki/index.php/Bug_Report), but it seems >>>>> to >>>>> >> > > me that the mailing list is filled up with developing messages. >>>>> I >>>>> >> > > don't want to participate in the development, I am a developer >>>>> but >>>>> >> I >>>>> >> > > don't have the skills nor the knowledge. >>>>> >> > > >>>>> >> > > If this is not the right place to direct my questions, I would >>>>> >> > > appreciate some advice. >>>>> >> > > >>>>> >> > > Thank you very much, and best regards. >>>>> >> > > >>>>> >> > > -----Mensaje original----- >>>>> >> > > De: linux-media-ow...@vger.kernel.org >>>>> >> > > [mailto:linux-media-ow...@vger.kernel.org] En nombre de dCrypt >>>>> >> > > Enviado el: jueves, 01 de enero de 2015 22:04 >>>>> >> > > Para: linux-media@vger.kernel.org >>>>> >> > > Asunto: [BUG] Dual tuner TV card, works using one tuner only, >>>>> >> > > doesn't work if both tuners are used >>>>> >> > > >>>>> >> > > Hi, >>>>> >> > > >>>>> >> > > I just subscribed to the mailing list to submit information on >>>>> the >>>>> >> > > bug which is driving me crazy since one month ago. >>>>> >> > > >>>>> >> > > I have a VDR based PVR at home, installed over an Ubuntu 14.04 >>>>> LTS. >>>>> >> > > Everything was working perfectly, until beginning of December. >>>>> It >>>>> >> > > seems to me that something changed that broke my PVR pretty bad. >>>>> >> > > >>>>> >> > > The problem is the following: tuning (zap) both tuners (it's not >>>>> >> > > needed that both are tuned simultaneously, only one after the >>>>> >> other, >>>>> >> > > in no particular order) makes the tuners to enter an state where >>>>> >> > > they can't lock the signal anymore. >>>>> >> > > >>>>> >> > > Facts: >>>>> >> > > >>>>> >> > > - My TV card is a Cinergy T PCIe Dual from Terratec >>>>> >> > > >>>>> >> >>>>> (http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_T_PCIe_dual). >>>>> >> > > - The problem arose in the form of "frontend x/0 timed out while >>>>> >> > > tuning to channel ..." in /var/log/syslog. It happened when both >>>>> >> > > tuners are active, during EPG scan. The problem does not happen >>>>> if >>>>> >> > > VDR is run with -D parameter to limit the number of frontends >>>>> >> > > enabled. Disabling the EPG scan with both frontends enabled >>>>> >> > > minimizes the problem, but doesn't solve it because tuning both >>>>> >> > > frontends without any EPG scan makes the error happen again. - I >>>>> >> > > initially thought about a problem in the DVB-T signal, because >>>>> it >>>>> >> > > all started the 1st of December, during the transition to a new >>>>> set >>>>> >> of frequencies in Spain. >>>>> >> > > - Everything was working perfectly before the 1st, and the >>>>> problems >>>>> >> > > started suddenly. >>>>> >> > > - I setup testing board for debugging, different board and >>>>> >> > > processor, less memory, lots of Linux distros tested, Windows >>>>> >> tested as well. >>>>> >> > > - Both tuners works in windows without problems. Confirmed. >>>>> >> > > - I have completely discarded problems/errors in hardware >>>>> (because >>>>> >> > > in Windows I can enable both tuners without problems) and VDR >>>>> >> > > (because I can reproduce the problems at OS level, without even >>>>> >> having VDR installed). >>>>> >> > > - I have almost narrowed the problem at the cx23885 driver, >>>>> because >>>>> >> > > when it happens, I can restart the TV card to working conditions >>>>> by >>>>> >> > > executing "rmmod cx23885" and "modprobe cx23885"; however, as >>>>> with >>>>> >> > > "rmmod" several dependencies are unloaded as well, I am stuck >>>>> and I >>>>> >> > > am unable to go on with debugging to find out where the problem >>>>> >> really is. >>>>> >> > > - Tools used to test and confirm the problem are: VDR, MythTV, >>>>> >> > > TVHeadend, dvbscan, dvbv5-scan, dvbv5-zap and others >>>>> >> > > - Linux distros tested: Ubuntu, Fedora, Suse, yaVDR (not sure if >>>>> >> the >>>>> >> > > card worked at all), MythBuntu ("dvb-fe-tool -a 1 -c DVBT" was >>>>> >> > > required to force DVB-T mode for the second tuner), and probably >>>>> >> > > others >>>>> >> > > - I have a Sony PlayTV also with dual tuners, which works >>>>> without >>>>> >> > > any problem. >>>>> >> > > >>>>> http://www.linuxtv.org/wiki/index.php/Sony_PlayTV_dual_tuner_DVB-T >>>>> >> > > >>>>> >> > > So, that's why I ask for your help. How can I further debug the >>>>> >> problem? >>>>> >> > > Is there something I can do? >>>>> >> > > >>>>> >> > > BR, and happy new year! >>>>> >> > > >>>>> >> > > >>>>> >> > > INFO & TEST: >>>>> >> > > >>>>> >> > > ---------------------------------------------------------------- >>>>> --- >>>>> >> -> >>>>> >> > > >>>>> >> > > pvr@prueba:~$ sudo lspci -vvv -s 03:00.0 03:00.0 Multimedia >>>>> video >>>>> >> > > controller: Conexant Systems, Inc. CX23885 PCI Video and Audio >>>>> >> > >Decoder (rev 04) >>>>> >> > > Subsystem: TERRATEC Electronic GmbH Cinergy T PCIe Dual >>>>> >> > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- >>>>> VGASnoop- >>>>> >> > > ParErr- >>>>> >> > > Stepping- SERR- FastB2B- DisINTx- >>>>> >> > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >>>>> >> > >>TAbort- >>>>> >> > > <TAbort- <MAbort- >SERR- <PERR- INTx- >>>>> >> > > Latency: 0, Cache Line Size: 4 bytes >>>>> >> > > Interrupt: pin A routed to IRQ 16 >>>>> >> > > Region 0: Memory at fba00000 (64-bit, non-prefetchable) >>>>> >> > >[size=2M] >>>>> >> > > Capabilities: [40] Express (v1) Endpoint, MSI 00 >>>>> >> > > DevCap: MaxPayload 128 bytes, PhantFunc 0, >>>>> Latency >>>>> >> > >L0s <64ns, L1 <1us >>>>> >> > > ExtTag- AttnBtn- AttnInd- PwrInd- RBE- >>>>> >> > >FLReset- >>>>> >> > > DevCtl: Report errors: Correctable- Non-Fatal- >>>>> >> > >Fatal- >>>>> >> > > Unsupported- >>>>> >> > > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- >>>>> >> NoSnoop+ >>>>> >> > > MaxPayload 128 bytes, MaxReadReq 512 >>>>> bytes >>>>> >> > > DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ >>>>> >> > >AuxPwr- >>>>> >> > > TransPend- >>>>> >> > > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM >>>>> L0s >>>>> >> > >L1, >>>>> >> > > Exit >>>>> >> > > Latency L0s <2us, L1 <4us >>>>> >> > > ClockPM- Surprise- LLActRep- BwNot- >>>>> >> > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- >>>>> >> > >CommClk+ >>>>> >> > > ExtSynch- ClockPM- AutWidDis- BWInt- >>>>> >> > >AutBWInt- >>>>> >> > > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- >>>>> >> > >SlotClk+ >>>>> >> > > DLActive- BWMgmt- ABWMgmt- >>>>> >> > > Capabilities: [80] Power Management version 2 >>>>> >> > > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA >>>>> >> > > PME(D0+,D1+,D2+,D3hot+,D3cold-) >>>>> >> > > Status: D0 NoSoftRst- PME-Enable- DSel=0 >>>>> DScale=0 >>>>> >> > >PME- >>>>> >> > > Capabilities: [90] Vital Product Data >>>>> >> > > Product Name: " >>>>> >> > > End >>>>> >> > > Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- >>>>> 64bit+ >>>>> >> > > Address: 0000000000000000 Data: 0000 >>>>> >> > > Capabilities: [100 v1] Advanced Error Reporting >>>>> >> > > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- >>>>> >> > >UnxCmplt- >>>>> >> > > RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- >>>>> >> > > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- >>>>> >> > >UnxCmplt- >>>>> >> > > RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- >>>>> >> > > UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- >>>>> >> > >UnxCmplt- >>>>> >> > > RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- >>>>> >> > > CESta: RxErr- BadTLP- BadDLLP- Rollover- >>>>> Timeout- >>>>> >> > > NonFatalErr- >>>>> >> > > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- >>>>> Timeout- >>>>> >> > > NonFatalErr- >>>>> >> > > AERCap: First Error Pointer: 14, GenCap- CGenEn- >>>>> >> > >ChkCap- >>>>> >> > > ChkEn- >>>>> >> > > Capabilities: [200 v1] Virtual Channel >>>>> >> > > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 >>>>> >> > > Arb: Fixed+ WRR32+ WRR64+ WRR128- >>>>> >> > > Ctrl: ArbSelect=WRR64 >>>>> >> > > Status: InProgress- >>>>> >> > > Port Arbitration Table [240] <?> >>>>> >> > > VC0: Caps: PATOffset=00 MaxTimeSlots=1 >>>>> >> > >RejSnoopTrans- >>>>> >> > > Arb: Fixed- WRR32- WRR64- WRR128- >>>>> >> > >TWRR128- >>>>> >> > > WRR256- >>>>> >> > > Ctrl: Enable+ ID=0 ArbSelect=Fixed >>>>> >> > >TC/VC=ff >>>>> >> > > Status: NegoPending- InProgress- >>>>> >> > > Kernel driver in use: cx23885 >>>>> >> > > >>>>> >> > > ---------------------------------------------------------------- >>>>> --- >>>>> >> -> >>>>> >> > > >>>>> >> > > pvr@prueba:~$ dmesg | grep cx >>>>> >> > > [ 12.812789] cx23885 driver version 0.0.3 loaded [ >>>>> 12.812997] >>>>> >> > > CORE cx23885[0]: subsystem: 153b:117e, board: TerraTec Cinergy T >>>>> >> > > PCIe Dual [card=34,autodetected] [ 12.949340] cx25840 11-0044: >>>>> >> > > cx23885 A/V decoder found @ 0x88 >>>>> >> > > (cx23885[0]) >>>>> >> > > [ 13.723953] cx25840 11-0044: loaded v4l-cx23885-avcore-01.fw >>>>> >> > > firmware >>>>> >> > > (16382 bytes) >>>>> >> > > [ 13.739701] cx23885_dvb_register() allocating 1 frontend(s) [ >>>>> >> > > 13.739704] cx23885[0]: cx23885 based dvb card [ 13.852565] >>>>> DVB: >>>>> >> > > registering new adapter (cx23885[0]) [ 13.852569] cx23885 >>>>> >> > > 0000:03:00.0: DVB: registering adapter 0 frontend 0 (DRXK DVB- >>>>> T)... >>>>> >> > > [ 13.852749] cx23885_dvb_register() allocating 1 frontend(s) [ >>>>> >> > > 13.852750] cx23885[0]: cx23885 based dvb card [ 13.958613] >>>>> DVB: >>>>> >> > > registering new adapter (cx23885[0]) [ 13.958618] cx23885 >>>>> >> > > 0000:03:00.0: DVB: registering adapter 1 frontend 0 (DRXK DVB-C >>>>> >> > > DVB-T)... >>>>> >> > > [ 13.958934] cx23885_dev_checkrevision() Hardware revision = >>>>> 0xa5 >>>>> >> > > [ 13.958939] cx23885[0]/0: found at 0000:03:00.0, rev: 4, irq: >>>>> >> 16, >>>>> >> > > latency: 0, mmio: 0xfba00000 >>>>> >> > > >>>>> >> > > ---------------------------------------------------------------- >>>>> --- >>>>> >> -> >>>>> >> > > >>>>> >> > > pvr@prueba:~$ sudo dvbv5-zap "La 1 HD." -c channelsv5.conf -a 0 >>>>> -x >>>>> >> > >using demux '/dev/dvb/adapter0/demux0' >>>>> >> > > reading channels from file 'channelsv5.conf' >>>>> >> > > service has pid type 05: 115 >>>>> >> > > tuning to 770000000 Hz >>>>> >> > > (0x00) Quality= Good Signal= 100,00% C/N= 11,30dB UCB= 2 >>>>> >> > >postBER= 0 preBER= 57,9x10^-6 PER= 48,8x10^-6 Lock (0x1f) >>>>> >> > >Quality= Good Signal= 100,00% C/N= 11,80dB UCB= 3 postBER= 0 >>>>> >> preBER= >>>>> >> > >55,1x10^-6 PER= 0 pvr@prueba:~$ pvr@prueba:~$ sudo dvbv5-zap >>>>> "La 1 >>>>> >> > >HD." -c channelsv5.conf -a 0 -x using demux >>>>> >> > >'/dev/dvb/adapter0/demux0' >>>>> >> > > reading channels from file 'channelsv5.conf' >>>>> >> > > service has pid type 05: 115 >>>>> >> > > tuning to 770000000 Hz >>>>> >> > > (0x00) Quality= Good Signal= 100,00% C/N= 11,80dB UCB= 3 >>>>> >> > >postBER= 0 preBER= 63,6x10^-6 PER= 56,3x10^-6 Lock (0x1f) >>>>> >> > >Quality= Good Signal= 100,00% C/N= 12,20dB UCB= 4 postBER= >>>>> >> > > 5,39x10^-6 preBER= 0 PER= 0 >>>>> >> > > pvr@prueba:~$ >>>>> >> > > pvr@prueba:~$ sudo dvbv5-zap "La 1 HD." -c channelsv5.conf -a 0 >>>>> -x >>>>> >> > >using demux '/dev/dvb/adapter0/demux0' >>>>> >> > > reading channels from file 'channelsv5.conf' >>>>> >> > > service has pid type 05: 115 >>>>> >> > > tuning to 770000000 Hz >>>>> >> > > (0x00) Quality= Good Signal= 100,00% C/N= 12,20dB UCB= 4 >>>>> >> > >postBER= >>>>> >> > > 1,01x10^-6 preBER= 58,6x10^-6 PER= 61,0x10^-6 Lock (0x1f) >>>>> >> > >Quality= Good Signal= 100,00% C/N= 12,10dB UCB= 4 postBER= 0 >>>>> >> preBER= >>>>> >> > >55,1x10^-6 PER= 0 pvr@prueba:~$ pvr@prueba:~$ sudo dvbv5-zap >>>>> "La 1 >>>>> >> > >HD." -c channelsv5.conf -a 1 -x using demux >>>>> >> > >'/dev/dvb/adapter1/demux0' >>>>> >> > > reading channels from file 'channelsv5.conf' >>>>> >> > > service has pid type 05: 115 >>>>> >> > > tuning to 770000000 Hz >>>>> >> > > (0x00) Signal= 0,00% >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 10,00dB >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 0,00dB >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 0,00dB >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 0,00dB >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 0,00dB >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 0,00dB >>>>> >> > > >>>>> >> > > ^Cpvr@prueba:~$ sudo dvbv5-zap "La 1 HD." -c channelsv5.conf -a >>>>> 0 - >>>>> >> x >>>>> >> > >using demux '/dev/dvb/adapter0/demux0' >>>>> >> > > reading channels from file 'channelsv5.conf' >>>>> >> > > service has pid type 05: 115 >>>>> >> > > tuning to 770000000 Hz >>>>> >> > > (0x00) Quality= Good Signal= 100,00% C/N= 12,10dB UCB= 4 >>>>> >> > >postBER= >>>>> >> > > 850x10^-9 preBER= 58,0x10^-6 PER= 51,4x10^-6 >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 0,00dB >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 0,00dB >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 0,00dB >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 8,80dB >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 10,00dB >>>>> >> > > >>>>> >> > > ^Cpvr@prueba:~$ sudo rmmod cx23885 >>>>> >> > > pvr@prueba:~$ sudo modprobe cx23885 pvr@prueba:~$ >>>>> pvr@prueba:~$ >>>>> >> > >pvr@prueba:~$ sudo dvbv5-zap "La 1 HD." -c channelsv5.conf -a 1 - >>>>> x >>>>> >> > >using demux '/dev/dvb/adapter1/demux0' >>>>> >> > > reading channels from file 'channelsv5.conf' >>>>> >> > > service has pid type 05: 115 >>>>> >> > > tuning to 770000000 Hz >>>>> >> > > (0x00) Signal= 0,00% >>>>> >> > > Lock (0x1f) Quality= Good Signal= 100,00% C/N= 10,40dB UCB= 0 >>>>> >> > >postBER= 0 preBER= 55,1x10^-6 PER= 0 pvr@prueba:~$ sudo dvbv5- >>>>> zap >>>>> >> > >"La 1 HD." -c channelsv5.conf -a 1 -x using demux >>>>> >> > >'/dev/dvb/adapter1/demux0' >>>>> >> > > reading channels from file 'channelsv5.conf' >>>>> >> > > service has pid type 05: 115 >>>>> >> > > tuning to 770000000 Hz >>>>> >> > > (0x00) Quality= Good Signal= 100,00% C/N= 10,40dB UCB= 0 >>>>> >> > >postBER= 0 preBER= 36,7x10^-6 PER= 0 Lock (0x1f) Quality= >>>>> Good >>>>> >> > >Signal= 100,00% C/N= 11,90dB UCB= 1 postBER= 0 preBER= 331x10^-6 >>>>> >> > >PER= 0 pvr@prueba:~$ sudo dvbv5-zap "La 1 HD." -c >>>>> channelsv5.conf - >>>>> >> a >>>>> >> > >1 -x using demux '/dev/dvb/adapter1/demux0' >>>>> >> > > reading channels from file 'channelsv5.conf' >>>>> >> > > service has pid type 05: 115 >>>>> >> > > tuning to 770000000 Hz >>>>> >> > > (0x00) Quality= Good Signal= 100,00% C/N= 11,90dB UCB= 1 >>>>> >> > >postBER= 0 preBER= 175x10^-6 PER= 40,7x10^-6 Lock (0x1f) >>>>> >> Quality= >>>>> >> > >Good Signal= 100,00% C/N= 12,30dB UCB= 2 postBER= 0 preBER= >>>>> >> > >55,1x10^-6 PER= 0 pvr@prueba:~$ sudo dvbv5-zap "La 1 HD." -c >>>>> >> > >channelsv5.conf -a 0 -x using demux '/dev/dvb/adapter0/demux0' >>>>> >> > > reading channels from file 'channelsv5.conf' >>>>> >> > > service has pid type 05: 115 >>>>> >> > > tuning to 770000000 Hz >>>>> >> > > (0x00) Signal= 0,00% >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 11,60dB >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 0,00dB >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 0,00dB >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 0,00dB >>>>> >> > > >>>>> >> > > ^Cpvr@prueba:~$ sudo dvbv5-zap "La 1 HD." -c channelsv5.conf -a >>>>> 1 - >>>>> >> x >>>>> >> > >using demux '/dev/dvb/adapter1/demux0' >>>>> >> > > reading channels from file 'channelsv5.conf' >>>>> >> > > service has pid type 05: 115 >>>>> >> > > tuning to 770000000 Hz >>>>> >> > > (0x00) Quality= Good Signal= 100,00% C/N= 12,30dB UCB= 2 >>>>> >> > >postBER= 0 preBER= 138x10^-6 PER= 54,3x10^-6 >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 10,20dB >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 11,70dB >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 0,00dB >>>>> >> > > Viterbi(0x07) Signal= 100,00% C/N= 10,40dB >>>>> >> > > >>>>> >> > > ^Cpvr@prueba:~$ >>>>> >> > > >>>>> >> > > >>>>> >> > > -- >>>>> >> > > To unsubscribe from this list: send the line "unsubscribe >>>>> >> > > linux-media" in the body of a message to >>>>> majord...@vger.kernel.org >>>>> >> > > More majordomo info at http://vger.kernel.org/majordomo- >>>>> info.html >>>>> >> > -- >>>>> >> > blind Pete >>>>> >> > Sig goes here... >>>>> >> > >>>>> >> > -- >>>>> >> > To unsubscribe from this list: send the line "unsubscribe linux- >>>>> >> media" >>>>> >> > in the body of a message to majord...@vger.kernel.org More >>>>> majordomo >>>>> >> > info at http://vger.kernel.org/majordomo-info.html >>>>> >> N r y b X ǧv ^ ){.n + { bj) w*jg ݢj/ z ޖ >>>>> 2 ޙ >>>>> >> & )ߡ a G h j:+v w ٥ >>>>> >> >>>>> >> -- >>>>> >> To unsubscribe from this list: send the line "unsubscribe linux- >>>>> media" >>>>> >> in the body of a message to majord...@vger.kernel.org More majordomo >>>>> >> info at http://vger.kernel.org/majordomo-info.html >>>> >>>-- >>>To unsubscribe from this list: send the line "unsubscribe linux-media" in >>>the body of a message to majord...@vger.kernel.org >>>More majordomo info at http://vger.kernel.org/majordomo-info.html >>> >> >> -- >> ------------------------------- >> dCrypt > -- ------------------------------- dCrypt -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html