On 02/19/2015 08:42 PM, Antti Seppälä wrote:
On 19 February 2015 at 18:14, Antti Palosaari <cr...@iki.fi> wrote:
On 02/19/2015 06:01 PM, Antti Seppälä wrote:
On 19 February 2015 at 17:38, Antti Palosaari <cr...@iki.fi> wrote:
On 02/19/2015 12:21 PM, Antti Seppälä wrote:
On 19 February 2015 at 11:43, Benjamin Larsson <benja...@southpole.se>
wrote:
On 2015-02-19 10:13, Antti Seppälä wrote:
It seems that currently the firmware download on the mn88472 is
somehow wrong for my Astrometa HD-901T2.
Reducing the download chunk size (mn88472_config.i2c_wr_max) to 2
makes the firmware download consistently succeed.
Hi, try adding the workaround patch I sent for this.
[PATCH 1/3] rtl28xxu: lower the rc poll time to mitigate i2c transfer
errors
I now see that it hasn't been merged. But I have been running with this
patch for a few months now without any major issues.
The patch really did improve firmware loading. Weird...
Even with it I still get occasional i2c errors from r820t:
[ 15.874402] r820t 8-003a: r820t_write: i2c wr failed=-32 reg=0a
len=1:
da
[ 81.455517] r820t 8-003a: r820t_read: i2c rd failed=-32 reg=00
len=4: 69 74 e6 df
[ 99.949702] r820t 8-003a: r820t_read: i2c rd failed=-32 reg=00
len=4: 69 74 e6 df
These errors seem to appear more often if I'm reading the signal
strength values using e.g. femon.
Could you disable whole IR polling and test
modprobe dvb_usb_v2 disable_rc_polling=1
It is funny that *increasing* RC polling makes things better, though...
Hi.
I tried loading the driver with polling disabled and it fails completely:
[ 5526.693563] mn88472 7-0018: downloading firmware from file
'dvb-demod-mn88472-02.fw'
[ 5527.032209] mn88472 7-0018: firmware download failed=-32
[ 5527.033864] rtl2832 7-0010: i2c reg write failed -32
[ 5527.033874] r820t 8-003a: r820t_write: i2c wr failed=-32 reg=05 len=1:
83
[ 5527.036014] rtl2832 7-0010: i2c reg write failed -32
I have no idea why the device behaves so counter-intuitively. Is there
maybe some sorf of internal power-save mode the device enters when
there is no i2c traffic for a while or something?
IR polling does not use I2C but some own commands. Could you make more
tests. Use rtl28xxu module parameter to disable IR and test. It will disable
both IR interrupts and polling. Then make some tests with different IR
polling intervals to see how it behaves.
Hi Antti.
I made some further tests for you. Here are the results:
dvb_usb_v2 disable_rc_polling=1: firmware download FAILED
dvb_usb_rtl28xxu disable_rc=1: firmware download FAILED
Then I restored the module parameters to default values and tested
with various rc->interval values:
interval = 800: firmware download FAILED
interval = 600: firmware download FAILED
interval = 400: firmware download FAILED
interval = 300: firmware download SUCCESS but I2C errors from tuner
could be sometimes observed
interval = 200: firmware download SUCCESS
interval = 100: firmware download SUCCESS
So somehow higher rc polling rate makes the firmware download succeed.
This could indeed be some locking/timing related bug.
Please let me know if there is something else I can test.
Sure you could do. Play with I2C settings. Test few values to I2C bus
speed / clock is good start. Put oscilloscope to I2C bus and look what
there happens on error cases. There is also 2 different I2C commands,
test if there is any difference. And so. Increasing polling interval to
something between 250-300 does not sound very bad, though.
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html