On 02/23/2015 09:24 PM, Gilles Risch wrote:
On 02/22/2015 10:29 PM, Antti Palosaari wrote:
On 02/22/2015 10:04 PM, Benjamin Larsson wrote:
On 02/22/2015 02:47 PM, Gilles Risch wrote:
[...]
[ 141.423608] WARNING: You are using an experimental version of the
media stack.
[ 141.423609] As the driver is backported to an older kernel, it
doesn't offer
[ 141.423610] enough quality for its usage in production.
[ 141.423611] Use it with care.
[ 141.423612] Latest git patches (needed if you report a bug to
linux-media@vger.kernel.org):
[ 141.423613] 135f9be9194cf7778eb73594aa55791b229cf27c [media]
dvb_frontend: start media pipeline while thread is running
[ 141.423614] 0f0fa90bd035fa15106799b813d4f0315d99f47e [media]
cx231xx: enable tuner->decoder link at videobuf start
[ 141.423615] 9239effd53d47e3cd9c653830c8465c0a3a427dc [media]
dvb-frontend: enable tuner link when the FE thread starts
[ 141.424714] em2884 #0: Binding DVB extension
[ 142.754917] usb 2-6: firmware: agent loaded
dvb-usb-hauppauge-hvr930c-drxk.fw into memory
[ 142.765420] drxk: status = 0x639260d9
[ 142.765430] drxk: detected a drx-3926k, spin A3, xtal 20.250 MHz
[ 144.006316] drxk: DRXK driver version 0.9.4300
[ 144.023065] drxk: frontend initialized.
The demod seems to initialize well.
[ 144.042622] xc5000 11-0061: creating new instance
[ 144.042938] xc5000: I2C read failed
The tuner does not initialize. What could be wrong is that the tuner
might need to be powered on (pulling some gpio pin) or it resides on
another i2c address then what the HVR-930C has it. Or something else.
MvH
Benjamin Larsson
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
