On Tuesday 10 March 2015 03:35:57 Sakari Ailus wrote:
> On Sun, Mar 08, 2015 at 11:33:27AM +0000, Lad Prabhakar wrote:
> ...
>
> > +static struct ov2659_platform_data *
> > +ov2659_get_pdata(struct i2c_client *client)
> > +{
> > + struct ov2659_platform_data *pdata;
> > + struct device_node *endpoint;
> > + int ret;
> > +
> > + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node) {
> > + dev_err(&client->dev, "ov2659_get_pdata: DT Node found\n");
> > + return client->dev.platform_data;
> > + }
> > +
> > + endpoint = of_graph_get_next_endpoint(client->dev.of_node, NULL);
> > + if (!endpoint)
> > + return NULL;
> > +
> > + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
> > + if (!pdata)
> > + goto done;
> > +
> > + ret = of_property_read_u32(endpoint, "link-frequencies",
> > + &pdata->link_frequency);
>
> This is actually documented as being a 64-bit array.
The main purpose of link-frequencies is to restrict the link frequencies
acceptable in the system due to EMI requirements. One link frequency should be
selected in the array based on the desired format and frame rate. This is
usually done by exposing the frequency to userspace through a writable
V4L2_CID_LINK_FREQ control, and exposing the resulting pixel rate as a read-
only V4L2_CID_PIXEL_RATE control.
V4L2_CID_PIXEL_RATE is mandatory to use the sensor with several drivers
(including omap3isp and omap4iss), so it should really be implemented.
> The smiapp wasn't even reading it from the endpoint node. Oh well...
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
