On 03/16/2015 11:57 PM, Antti Palosaari wrote:
On 03/17/2015 12:12 AM, Benjamin Larsson wrote:
Is this structure ok for the slave pid implementation? Or should there
be only one filters parameter? Will the overlaying pid filter framework
properly "flush" the set pid filters ?
Note that this code currently is only compile tested.
I am fine with it.
byw. Have you tested if your QAM256 (DVB-C or DVB-T2) stream is valid
even without a PID filtering? IIRC mine stream is correct and PID
filtering is not required (but surely it could be implemented if you wish).
regards
Antti
DVB-C seems fine and one of my DVB-T2 muxes is fine also. But one other
DVB-T2 mux completely fails. It could be the reception but it might be
that it needs pid filtering. I do get small disturbances on my DVB-C
muxes. Will report back if pid filtering makes things better or not.
MvH
Benjamin Larsson
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
