Document the interaction between VIDIOC_DECODER_CMD V4L2_DEC_CMD_STOP and
VIDIOC_ENCODER_CMD V4L2_ENC_CMD_STOP to start the draining, the V4L2_EVENT_EOS
event signalling all capture buffers are finished and ready to be dequeud,
the new V4L2_BUF_FLAG_LAST buffer flag indicating the last buffer being dequeued
from the capture queue, and the poll and VIDIOC_DQBUF ioctl return values once
the queue is drained.
Signed-off-by: Philipp Zabel <p.za...@pengutronix.de>
Acked-by: Hans Verkuil <hans.verk...@cisco.com>
---
Changes since v5:
- Drop "mem2mem" from subject.
- Mention possibly empty last buffer in the documentation.
---
Documentation/DocBook/media/v4l/io.xml | 12 ++++++++++++
Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml | 12 +++++++++++-
Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml | 10 +++++++++-
Documentation/DocBook/media/v4l/vidioc-qbuf.xml | 8 ++++++++
4 files changed, 40 insertions(+), 2 deletions(-)
diff --git a/Documentation/DocBook/media/v4l/io.xml
b/Documentation/DocBook/media/v4l/io.xml
index 1c17f80..cff2ffd 100644
--- a/Documentation/DocBook/media/v4l/io.xml
+++ b/Documentation/DocBook/media/v4l/io.xml
@@ -1129,6 +1129,18 @@ in this buffer has not been created by the CPU but by
some DMA-capable unit,
in which case caches have not been used.</entry>
</row>
<row>
+ <entry><constant>V4L2_BUF_FLAG_LAST</constant></entry>
+ <entry>0x00100000</entry>
+ <entry>Last buffer produced by the hardware. mem2mem codec drivers
+set this flag on the capture queue for the last buffer when the
+<link linkend="vidioc-querybuf">VIDIOC_QUERYBUF</link> or
+<link linkend="vidioc-qbuf">VIDIOC_DQBUF</link> ioctl is called. Due to
hardware
+limitations, the last buffer may be empty. In this case the driver will set the
+<structfield>bytesused</structfield> field to 0, regardless of the format. Any
+Any subsequent call to the <link linkend="vidioc-qbuf">VIDIOC_DQBUF</link>
ioctl
+will not block anymore, but return an &EPIPE;.</entry>
+ </row>
+ <row>
<entry><constant>V4L2_BUF_FLAG_TIMESTAMP_MASK</constant></entry>
<entry>0x0000e000</entry>
<entry>Mask for timestamp types below. To test the
diff --git a/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml
b/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml
index 9215627..73eb5cf 100644
--- a/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml
@@ -197,7 +197,17 @@ be muted when playing back at a non-standard speed.
this command does nothing. This command has two flags:
if <constant>V4L2_DEC_CMD_STOP_TO_BLACK</constant> is set, then the decoder
will
set the picture to black after it stopped decoding. Otherwise the last image
will
-repeat. If <constant>V4L2_DEC_CMD_STOP_IMMEDIATELY</constant> is set, then the
decoder
+repeat. mem2mem decoders will stop producing new frames altogether. They will
send
+a <constant>V4L2_EVENT_EOS</constant> event when the last frame has been
decoded
+and all frames are ready to be dequeued and will set the
+<constant>V4L2_BUF_FLAG_LAST</constant> buffer flag on the last buffer of the
+capture queue to indicate there will be no new buffers produced to dequeue.
This
+buffer may be empty, indicated by the driver setting the
+<structfield>bytesused</structfield> field to 0. Once the
+<constant>V4L2_BUF_FLAG_LAST</constant> flag was set, the
+<link linkend="vidioc-qbuf">VIDIOC_DQBUF</link> ioctl will not block anymore,
+but return an &EPIPE;.
+If <constant>V4L2_DEC_CMD_STOP_IMMEDIATELY</constant> is set, then the decoder
stops immediately (ignoring the <structfield>pts</structfield> value),
otherwise it
will keep decoding until timestamp >= pts or until the last of the pending
data from
its internal buffers was decoded.
diff --git a/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml
b/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml
index 0619ca5..fc1d462 100644
--- a/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml
@@ -129,7 +129,15 @@ this command.</entry>
encoding will continue until the end of the current <wordasword>Group
Of Pictures</wordasword>, otherwise encoding will stop immediately.
When the encoder is already stopped, this command does
-nothing.</entry>
+nothing. mem2mem encoders will send a <constant>V4L2_EVENT_EOS</constant> event
+when the last frame has been decoded and all frames are ready to be dequeued
and
+will set the <constant>V4L2_BUF_FLAG_LAST</constant> buffer flag on the last
+buffer of the capture queue to indicate there will be no new buffers produced
to
+dequeue. This buffer may be empty, indicated by the driver setting the
+<structfield>bytesused</structfield> field to 0. Once the
+<constant>V4L2_BUF_FLAG_LAST</constant> flag was set, the
+<link linkend="vidioc-qbuf">VIDIOC_DQBUF</link> ioctl will not block anymore,
+but return an &EPIPE;.</entry>
</row>
<row>
<entry><constant>V4L2_ENC_CMD_PAUSE</constant></entry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-qbuf.xml
b/Documentation/DocBook/media/v4l/vidioc-qbuf.xml
index 3504a7f..6cfc53b 100644
--- a/Documentation/DocBook/media/v4l/vidioc-qbuf.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-qbuf.xml
@@ -186,6 +186,14 @@ In that case the application should be able to safely
reuse the buffer and
continue streaming.
</para>
</listitem>
+ <term><errorcode>EPIPE</errorcode></term>
+ <listitem>
+ <para><constant>VIDIOC_DQBUF</constant> returns this on an empty
+capture queue for mem2mem codecs if a buffer with the
+<constant>V4L2_BUF_FLAG_LAST</constant> was already dequeued and no new buffers
+are expected to become available.
+ </para>
+ </listitem>
</varlistentry>
</variablelist>
</refsect1>
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
