Em Mon, 08 Jun 2015 22:35:33 +0900
Junghak Sung <[email protected]> escreveu:
> Make the struct vb2_buffer to common buffer by removing v4l2-specific members.
> And common video buffer is embedded into v4l2-specific video buffer like:
> struct vb2_v4l2_buffer {
> struct vb2_buffer vb2;
> struct v4l2_buffer v4l2_buf;
> struct v4l2_plane v4l2_planes[VIDEO_MAX_PLANES];
> };
> This changes require the modifications of all device drivers that use this
> structure.
Thanks for the patch!
In general, it looks fine. Just a few comments. See below.
Regards,
Mauro
>
> Signed-off-by: Junghak Sung <[email protected]>
> ---
> Documentation/video4linux/v4l2-pci-skeleton.c | 12 +-
> drivers/media/dvb-frontends/rtl2832_sdr.c | 10 +-
> drivers/media/pci/cx23885/cx23885-417.c | 12 +-
> drivers/media/pci/cx23885/cx23885-dvb.c | 12 +-
> drivers/media/pci/cx23885/cx23885-vbi.c | 12 +-
> drivers/media/pci/cx23885/cx23885-video.c | 12 +-
> drivers/media/pci/cx23885/cx23885.h | 2 +-
> drivers/media/pci/cx25821/cx25821-video.c | 12 +-
> drivers/media/pci/cx25821/cx25821.h | 2 +-
> drivers/media/pci/cx88/cx88-blackbird.c | 14 +-
> drivers/media/pci/cx88/cx88-dvb.c | 14 +-
> drivers/media/pci/cx88/cx88-vbi.c | 12 +-
> drivers/media/pci/cx88/cx88-video.c | 12 +-
> drivers/media/pci/cx88/cx88.h | 2 +-
> drivers/media/pci/saa7134/saa7134-empress.c | 2 +-
> drivers/media/pci/saa7134/saa7134-ts.c | 10 +-
> drivers/media/pci/saa7134/saa7134-vbi.c | 12 +-
> drivers/media/pci/saa7134/saa7134-video.c | 18 +-
> drivers/media/pci/saa7134/saa7134.h | 8 +-
> drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c | 14 +-
> drivers/media/pci/solo6x10/solo6x10-v4l2.c | 6 +-
> drivers/media/pci/solo6x10/solo6x10.h | 4 +-
> drivers/media/pci/sta2x11/sta2x11_vip.c | 20 +-
> drivers/media/pci/tw68/tw68-video.c | 12 +-
> drivers/media/pci/tw68/tw68.h | 2 +-
> drivers/media/platform/am437x/am437x-vpfe.c | 16 +-
> drivers/media/platform/am437x/am437x-vpfe.h | 2 +-
> drivers/media/platform/blackfin/bfin_capture.c | 20 +-
> drivers/media/platform/coda/coda-bit.c | 20 +-
> drivers/media/platform/coda/coda-common.c | 24 +-
> drivers/media/platform/coda/coda-jpeg.c | 2 +-
> drivers/media/platform/coda/coda.h | 6 +-
> drivers/media/platform/davinci/vpbe_display.c | 8 +-
> drivers/media/platform/davinci/vpif_capture.c | 16 +-
> drivers/media/platform/davinci/vpif_capture.h | 2 +-
> drivers/media/platform/davinci/vpif_display.c | 18 +-
> drivers/media/platform/davinci/vpif_display.h | 6 +-
> drivers/media/platform/exynos-gsc/gsc-core.c | 2 +-
> drivers/media/platform/exynos-gsc/gsc-core.h | 6 +-
> drivers/media/platform/exynos-gsc/gsc-m2m.c | 16 +-
> drivers/media/platform/exynos4-is/fimc-capture.c | 12 +-
> drivers/media/platform/exynos4-is/fimc-core.c | 4 +-
> drivers/media/platform/exynos4-is/fimc-core.h | 6 +-
> drivers/media/platform/exynos4-is/fimc-is.h | 2 +-
> drivers/media/platform/exynos4-is/fimc-isp-video.c | 14 +-
> drivers/media/platform/exynos4-is/fimc-isp-video.h | 2 +-
> drivers/media/platform/exynos4-is/fimc-isp.h | 4 +-
> drivers/media/platform/exynos4-is/fimc-lite.c | 10 +-
> drivers/media/platform/exynos4-is/fimc-lite.h | 4 +-
> drivers/media/platform/exynos4-is/fimc-m2m.c | 16 +-
> drivers/media/platform/m2m-deinterlace.c | 16 +-
> drivers/media/platform/marvell-ccic/mcam-core.c | 24 +-
> drivers/media/platform/marvell-ccic/mcam-core.h | 2 +-
> drivers/media/platform/mx2_emmaprp.c | 16 +-
> drivers/media/platform/omap3isp/ispvideo.c | 8 +-
> drivers/media/platform/omap3isp/ispvideo.h | 4 +-
> drivers/media/platform/s3c-camif/camif-capture.c | 12 +-
> drivers/media/platform/s3c-camif/camif-core.c | 2 +-
> drivers/media/platform/s3c-camif/camif-core.h | 4 +-
> drivers/media/platform/s5p-g2d/g2d.c | 16 +-
> drivers/media/platform/s5p-jpeg/jpeg-core.c | 30 +-
> drivers/media/platform/s5p-mfc/s5p_mfc.c | 2 +-
> drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 4 +-
> drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 10 +-
> drivers/media/platform/s5p-mfc/s5p_mfc_enc.c | 18 +-
> drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c | 2 +-
> drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 2 +-
> drivers/media/platform/s5p-tv/mixer.h | 4 +-
> drivers/media/platform/s5p-tv/mixer_video.c | 4 +-
> drivers/media/platform/sh_veu.c | 20 +-
> drivers/media/platform/soc_camera/atmel-isi.c | 20 +-
> drivers/media/platform/soc_camera/mx2_camera.c | 14 +-
> drivers/media/platform/soc_camera/mx3_camera.c | 18 +-
> drivers/media/platform/soc_camera/rcar_vin.c | 14 +-
> .../platform/soc_camera/sh_mobile_ceu_camera.c | 22 +-
> drivers/media/platform/soc_camera/soc_camera.c | 2 +-
> drivers/media/platform/ti-vpe/vpe.c | 26 +-
> drivers/media/platform/vim2m.c | 24 +-
> drivers/media/platform/vivid/vivid-core.h | 4 +-
> drivers/media/platform/vivid/vivid-sdr-cap.c | 8 +-
> drivers/media/platform/vivid/vivid-vbi-cap.c | 10 +-
> drivers/media/platform/vivid/vivid-vbi-out.c | 10 +-
> drivers/media/platform/vivid/vivid-vid-cap.c | 12 +-
> drivers/media/platform/vivid/vivid-vid-out.c | 8 +-
> drivers/media/platform/vsp1/vsp1_rpf.c | 4 +-
> drivers/media/platform/vsp1/vsp1_video.c | 16 +-
> drivers/media/platform/vsp1/vsp1_video.h | 6 +-
> drivers/media/platform/vsp1/vsp1_wpf.c | 4 +-
> drivers/media/usb/airspy/airspy.c | 6 +-
> drivers/media/usb/au0828/au0828-vbi.c | 8 +-
> drivers/media/usb/au0828/au0828-video.c | 8 +-
> drivers/media/usb/au0828/au0828.h | 2 +-
> drivers/media/usb/em28xx/em28xx-vbi.c | 8 +-
> drivers/media/usb/em28xx/em28xx-video.c | 8 +-
> drivers/media/usb/em28xx/em28xx.h | 2 +-
> drivers/media/usb/go7007/go7007-priv.h | 4 +-
> drivers/media/usb/go7007/go7007-v4l2.c | 10 +-
> drivers/media/usb/hackrf/hackrf.c | 6 +-
> drivers/media/usb/msi2500/msi2500.c | 6 +-
> drivers/media/usb/pwc/pwc-if.c | 18 +-
> drivers/media/usb/pwc/pwc.h | 2 +-
> drivers/media/usb/s2255/s2255drv.c | 10 +-
> drivers/media/usb/stk1160/stk1160-v4l.c | 4 +-
> drivers/media/usb/stk1160/stk1160.h | 4 +-
> drivers/media/usb/usbtv/usbtv-video.c | 6 +-
> drivers/media/usb/usbtv/usbtv.h | 2 +-
> drivers/media/usb/uvc/uvc_queue.c | 14 +-
> drivers/media/usb/uvc/uvcvideo.h | 4 +-
> drivers/media/v4l2-core/Makefile | 2 +-
> drivers/media/v4l2-core/v4l2-ioctl.c | 2 +-
> drivers/media/v4l2-core/v4l2-mem2mem.c | 6 +-
> drivers/media/v4l2-core/videobuf2-core.c | 398 +++++++++----------
> drivers/media/v4l2-core/videobuf2-dma-contig.c | 2 +-
> drivers/media/v4l2-core/videobuf2-dma-sg.c | 2 +-
> drivers/media/v4l2-core/videobuf2-dvb.c | 2 +-
> drivers/media/v4l2-core/videobuf2-memops.c | 2 +-
> .../{videobuf2-core.c => videobuf2-v4l2.c} | 400
> ++++++++++----------
> drivers/media/v4l2-core/videobuf2-vmalloc.c | 2 +-
> drivers/staging/media/davinci_vpfe/vpfe_video.c | 30 +-
> drivers/staging/media/davinci_vpfe/vpfe_video.h | 2 +-
> drivers/staging/media/dt3155v4l/dt3155v4l.c | 14 +-
> drivers/staging/media/dt3155v4l/dt3155v4l.h | 2 +-
> drivers/staging/media/omap4iss/iss_video.c | 16 +-
> drivers/staging/media/omap4iss/iss_video.h | 4 +-
> drivers/usb/gadget/function/uvc_queue.c | 14 +-
> drivers/usb/gadget/function/uvc_queue.h | 4 +-
> include/media/davinci/vpbe_display.h | 2 +-
> include/media/soc_camera.h | 2 +-
> include/media/v4l2-mem2mem.h | 8 +-
> include/media/videobuf2-core.h | 76 ++--
> include/media/videobuf2-dma-contig.h | 4 +-
> include/media/videobuf2-dma-sg.h | 4 +-
> include/media/videobuf2-dvb.h | 2 +-
> include/media/videobuf2-memops.h | 2 +-
> .../media/{videobuf2-core.h => videobuf2-v4l2.h} | 80 ++--
> include/media/videobuf2-vmalloc.h | 2 +-
> 136 files changed, 1081 insertions(+), 1045 deletions(-)
> copy drivers/media/v4l2-core/{videobuf2-core.c => videobuf2-v4l2.c} (89%)
> copy include/media/{videobuf2-core.h => videobuf2-v4l2.h} (94%)
>
Let me go directly to the header changes. Everything else is consequence
of that. As I said before, the best is to have a script that would do the
renaming changes to fulfill what was changed in the headers.
> --- a/include/media/videobuf2-core.h
> +++ b/include/media/videobuf2-core.h
> @@ -1,5 +1,5 @@
> /*
> - * videobuf2-core.h - V4L2 driver helper framework
> + * videobuf2-core.h - Video Buffer 2 framework
> *
> * Copyright (C) 2010 Samsung Electronics
> *
> @@ -171,18 +171,7 @@ enum vb2_buffer_state {
> struct vb2_queue;
>
> /**
> - * struct vb2_buffer - represents a video buffer
> - * @v4l2_buf: struct v4l2_buffer associated with this buffer;
> can
> - * be read by the driver and relevant entries can be
> - * changed by the driver in case of CAPTURE types
> - * (such as timestamp)
> - * @v4l2_planes: struct v4l2_planes associated with this buffer; can
> - * be read by the driver and relevant entries can be
> - * changed by the driver in case of CAPTURE types
> - * (such as bytesused); NOTE that even for single-planar
> - * types, the v4l2_planes[0] struct should be used
> - * instead of v4l2_buf for filling bytesused - drivers
> - * should use the vb2_set_plane_payload() function for that
> + * struct vb2_buffer - represents a common video buffer
> * @vb2_queue: the queue to which this driver belongs
> * @num_planes: number of planes in the buffer
> * on an internal driver queue
> @@ -194,11 +183,7 @@ struct vb2_queue;
> * @planes: private per-plane information; do not change
> */
> struct vb2_buffer {
> - struct v4l2_buffer v4l2_buf;
> - struct v4l2_plane v4l2_planes[VIDEO_MAX_PLANES];
> -
> struct vb2_queue *vb2_queue;
> -
> unsigned int num_planes;
>
> /* Private: internal use only */
> @@ -242,6 +227,27 @@ struct vb2_buffer {
> };
>
> /**
> + * struct vb2_v4l2_buffer - represents a video buffer for v4l2
> + * @vb2_buf: common video buffer
> + * @v4l2_buf: struct v4l2_buffer associated with this buffer;
> can
> + * be read by the driver and relevant entries can be
> + * changed by the driver in case of CAPTURE types
> + * (such as timestamp)
> + * @v4l2_planes: struct v4l2_planes associated with this buffer; can
> + * be read by the driver and relevant entries can be
> + * changed by the driver in case of CAPTURE types
> + * (such as bytesused); NOTE that even for single-planar
> + * types, the v4l2_planes[0] struct should be used
> + * instead of v4l2_buf for filling bytesused - drivers
> + * should use the vb2_set_plane_payload() function for that
> + */
> +struct vb2_v4l2_buffer {
> + struct vb2_buffer vb2;
> + struct v4l2_buffer v4l2_buf;
> + struct v4l2_plane v4l2_planes[VIDEO_MAX_PLANES];
> +};
> +
> +/**
> * struct vb2_ops - driver-specific callbacks
> *
> * @queue_setup: called from VIDIOC_REQBUFS and VIDIOC_CREATE_BUFS
> @@ -328,15 +334,15 @@ struct vb2_ops {
> void (*wait_prepare)(struct vb2_queue *q);
> void (*wait_finish)(struct vb2_queue *q);
>
> - int (*buf_init)(struct vb2_buffer *vb);
> - int (*buf_prepare)(struct vb2_buffer *vb);
> - void (*buf_finish)(struct vb2_buffer *vb);
> - void (*buf_cleanup)(struct vb2_buffer *vb);
> + int (*buf_init)(struct vb2_v4l2_buffer *vb);
> + int (*buf_prepare)(struct vb2_v4l2_buffer *vb);
> + void (*buf_finish)(struct vb2_v4l2_buffer *vb);
> + void (*buf_cleanup)(struct vb2_v4l2_buffer *vb);
>
> int (*start_streaming)(struct vb2_queue *q, unsigned int count);
> void (*stop_streaming)(struct vb2_queue *q);
>
> - void (*buf_queue)(struct vb2_buffer *vb);
> + void (*buf_queue)(struct vb2_v4l2_buffer *vb);
> };
>
> struct v4l2_fh;
> @@ -361,7 +367,7 @@ struct v4l2_fh;
> * @drv_priv: driver private data
> * @buf_struct_size: size of the driver-specific buffer structure;
> * "0" indicates the driver doesn't want to use a custom buffer
> - * structure type, so sizeof(struct vb2_buffer) will is used
> + * structure type, so sizeof(struct vb2_v4l2_buffer) will is used
> * @timestamp_flags: Timestamp flags; V4L2_BUF_FLAG_TIMESTAMP_* and
> * V4L2_BUF_FLAG_TSTAMP_SRC_*
> * @gfp_flags: additional gfp flags used when allocating the buffers.
> @@ -398,7 +404,7 @@ struct vb2_queue {
> unsigned int io_modes;
> unsigned int io_flags;
> struct mutex *lock;
> - struct v4l2_fh *owner;
> + void *owner;
Looks ok, except for the extra tab that disaligns it. Please notice
that, on Kernel, a tab is 8 spaces.
>
> const struct vb2_ops *ops;
> const struct vb2_mem_ops *mem_ops;
> @@ -411,7 +417,7 @@ struct vb2_queue {
> /* private: internal use only */
> struct mutex mmap_lock;
> enum v4l2_memory memory;
> - struct vb2_buffer *bufs[VIDEO_MAX_FRAME];
> + void *bufs[VIDEO_MAX_FRAME];
Hmm.. why void? It can be struct vb2_buffer. Of course, in order
to get the buffer, the code would need to do something like:
struct vb2_v4l2_buffer *vb;
vb = container_of(bufs[0], struct vb2_v4l2_buffer, vb2);
But this would avoid the typecasts at the VB2 core, and, most importantly,
it would ensure strong type checks by the compiler.
> unsigned int num_buffers;
>
> struct list_head queued_list;
> @@ -446,10 +452,10 @@ struct vb2_queue {
> #endif
> };
>
> -void *vb2_plane_vaddr(struct vb2_buffer *vb, unsigned int plane_no);
> -void *vb2_plane_cookie(struct vb2_buffer *vb, unsigned int plane_no);
> +void *vb2_plane_vaddr(struct vb2_v4l2_buffer *vb, unsigned int plane_no);
> +void *vb2_plane_cookie(struct vb2_v4l2_buffer *vb, unsigned int plane_no);
>
> -void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state state);
> +void vb2_buffer_done(struct vb2_v4l2_buffer *vb, enum vb2_buffer_state
> state);
> void vb2_discard_done(struct vb2_queue *q);
> int vb2_wait_for_all_buffers(struct vb2_queue *q);
>
> @@ -489,7 +495,7 @@ size_t vb2_write(struct vb2_queue *q, const char __user
> *data, size_t count,
> *
> * This is called whenever a buffer is dequeued in the thread.
> */
> -typedef int (*vb2_thread_fnc)(struct vb2_buffer *vb, void *priv);
> +typedef int (*vb2_thread_fnc)(struct vb2_v4l2_buffer *vb, void *priv);
>
> /**
> * vb2_thread_start() - start a thread for the given queue.
> @@ -566,10 +572,10 @@ static inline void *vb2_get_drv_priv(struct vb2_queue
> *q)
> * @plane_no: plane number for which payload should be set
> * @size: payload in bytes
> */
> -static inline void vb2_set_plane_payload(struct vb2_buffer *vb,
> +static inline void vb2_set_plane_payload(struct vb2_v4l2_buffer *vb,
> unsigned int plane_no, unsigned long size)
> {
> - if (plane_no < vb->num_planes)
> + if (plane_no < vb->vb2.num_planes)
> vb->v4l2_planes[plane_no].bytesused = size;
> }
>
> @@ -579,10 +585,10 @@ static inline void vb2_set_plane_payload(struct
> vb2_buffer *vb,
> * @plane_no: plane number for which payload should be set
> * @size: payload in bytes
> */
> -static inline unsigned long vb2_get_plane_payload(struct vb2_buffer *vb,
> +static inline unsigned long vb2_get_plane_payload(struct vb2_v4l2_buffer *vb,
> unsigned int plane_no)
> {
> - if (plane_no < vb->num_planes)
> + if (plane_no < vb->vb2.num_planes)
> return vb->v4l2_planes[plane_no].bytesused;
> return 0;
> }
> @@ -593,9 +599,9 @@ static inline unsigned long vb2_get_plane_payload(struct
> vb2_buffer *vb,
> * @plane_no: plane number for which size should be returned
> */
> static inline unsigned long
> -vb2_plane_size(struct vb2_buffer *vb, unsigned int plane_no)
> +vb2_plane_size(struct vb2_v4l2_buffer *vb, unsigned int plane_no)
> {
> - if (plane_no < vb->num_planes)
> + if (plane_no < vb->vb2.num_planes)
> return vb->v4l2_planes[plane_no].length;
> return 0;
> }
> diff --git a/include/media/videobuf2-dma-contig.h
> b/include/media/videobuf2-dma-contig.h
> index 8197f87..3de9111 100644
> --- a/include/media/videobuf2-dma-contig.h
> +++ b/include/media/videobuf2-dma-contig.h
> @@ -13,11 +13,11 @@
> #ifndef _MEDIA_VIDEOBUF2_DMA_CONTIG_H
> #define _MEDIA_VIDEOBUF2_DMA_CONTIG_H
>
> -#include <media/videobuf2-core.h>
> +#include <media/videobuf2-v4l2.h>
> #include <linux/dma-mapping.h>
>
> static inline dma_addr_t
> -vb2_dma_contig_plane_dma_addr(struct vb2_buffer *vb, unsigned int plane_no)
> +vb2_dma_contig_plane_dma_addr(struct vb2_v4l2_buffer *vb, unsigned int
> plane_no)
> {
> dma_addr_t *addr = vb2_plane_cookie(vb, plane_no);
>
> diff --git a/include/media/videobuf2-dma-sg.h
> b/include/media/videobuf2-dma-sg.h
> index 14ce306..36f7ea3 100644
> --- a/include/media/videobuf2-dma-sg.h
> +++ b/include/media/videobuf2-dma-sg.h
> @@ -13,10 +13,10 @@
> #ifndef _MEDIA_VIDEOBUF2_DMA_SG_H
> #define _MEDIA_VIDEOBUF2_DMA_SG_H
>
> -#include <media/videobuf2-core.h>
> +#include <media/videobuf2-v4l2.h>
>
> static inline struct sg_table *vb2_dma_sg_plane_desc(
> - struct vb2_buffer *vb, unsigned int plane_no)
> + struct vb2_v4l2_buffer *vb, unsigned int plane_no)
> {
> return (struct sg_table *)vb2_plane_cookie(vb, plane_no);
> }
> diff --git a/include/media/videobuf2-dvb.h b/include/media/videobuf2-dvb.h
> index 8f61456..bef9127 100644
> --- a/include/media/videobuf2-dvb.h
> +++ b/include/media/videobuf2-dvb.h
> @@ -6,7 +6,7 @@
> #include <dvb_demux.h>
> #include <dvb_net.h>
> #include <dvb_frontend.h>
> -#include <media/videobuf2-core.h>
> +#include <media/videobuf2-v4l2.h>
>
> struct vb2_dvb {
> /* filling that the job of the driver */
> diff --git a/include/media/videobuf2-memops.h
> b/include/media/videobuf2-memops.h
> index f05444c..7b6d475 100644
> --- a/include/media/videobuf2-memops.h
> +++ b/include/media/videobuf2-memops.h
> @@ -14,7 +14,7 @@
> #ifndef _MEDIA_VIDEOBUF2_MEMOPS_H
> #define _MEDIA_VIDEOBUF2_MEMOPS_H
>
> -#include <media/videobuf2-core.h>
> +#include <media/videobuf2-v4l2.h>
>
> /**
> * vb2_vmarea_handler - common vma refcount tracking handler
> diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-v4l2.h
> similarity index 94%
> copy from include/media/videobuf2-core.h
> copy to include/media/videobuf2-v4l2.h
> index bd2cec2..80b08cb 100644
> --- a/include/media/videobuf2-core.h
> +++ b/include/media/videobuf2-v4l2.h
> @@ -9,8 +9,8 @@
> * it under the terms of the GNU General Public License as published by
> * the Free Software Foundation.
> */
> -#ifndef _MEDIA_VIDEOBUF2_CORE_H
> -#define _MEDIA_VIDEOBUF2_CORE_H
> +#ifndef _MEDIA_VIDEOBUF2_V4L2_H
> +#define _MEDIA_VIDEOBUF2_V4L2_H
>
> #include <linux/mm_types.h>
> #include <linux/mutex.h>
> @@ -171,18 +171,7 @@ enum vb2_buffer_state {
> struct vb2_queue;
>
> /**
> - * struct vb2_buffer - represents a video buffer
> - * @v4l2_buf: struct v4l2_buffer associated with this buffer;
> can
> - * be read by the driver and relevant entries can be
> - * changed by the driver in case of CAPTURE types
> - * (such as timestamp)
> - * @v4l2_planes: struct v4l2_planes associated with this buffer; can
> - * be read by the driver and relevant entries can be
> - * changed by the driver in case of CAPTURE types
> - * (such as bytesused); NOTE that even for single-planar
> - * types, the v4l2_planes[0] struct should be used
> - * instead of v4l2_buf for filling bytesused - drivers
> - * should use the vb2_set_plane_payload() function for that
> + * struct vb2_buffer - represents a common video buffer
> * @vb2_queue: the queue to which this driver belongs
> * @num_planes: number of planes in the buffer
> * on an internal driver queue
> @@ -194,11 +183,7 @@ struct vb2_queue;
> * @planes: private per-plane information; do not change
> */
> struct vb2_buffer {
> - struct v4l2_buffer v4l2_buf;
> - struct v4l2_plane v4l2_planes[VIDEO_MAX_PLANES];
> -
> struct vb2_queue *vb2_queue;
> -
> unsigned int num_planes;
>
> /* Private: internal use only */
> @@ -242,6 +227,27 @@ struct vb2_buffer {
> };
Why are you declaring it again here? Instead, just include
videobuf2-core.h.
>
> /**
> + * struct vb2_v4l2_buffer - represents a video buffer for v4l2
> + * @vb2_buf: common video buffer
> + * @v4l2_buf: struct v4l2_buffer associated with this buffer;
> can
> + * be read by the driver and relevant entries can be
> + * changed by the driver in case of CAPTURE types
> + * (such as timestamp)
> + * @v4l2_planes: struct v4l2_planes associated with this buffer; can
> + * be read by the driver and relevant entries can be
> + * changed by the driver in case of CAPTURE types
> + * (such as bytesused); NOTE that even for single-planar
> + * types, the v4l2_planes[0] struct should be used
> + * instead of v4l2_buf for filling bytesused - drivers
> + * should use the vb2_set_plane_payload() function for that
> + */
> +struct vb2_v4l2_buffer {
> + struct vb2_buffer vb2;
> + struct v4l2_buffer v4l2_buf;
> + struct v4l2_plane v4l2_planes[VIDEO_MAX_PLANES];
> +};
> +
Same here: this got declared twice.
As I explained on my comment 0/3, in order to easy patch review, I would
first rename the header, then do those changes and then move the
non-vb4l2 functions to the new videobuf2-core.h
> +/**
> * struct vb2_ops - driver-specific callbacks
> *
> * @queue_setup: called from VIDIOC_REQBUFS and VIDIOC_CREATE_BUFS
> @@ -328,15 +334,15 @@ struct vb2_ops {
> void (*wait_prepare)(struct vb2_queue *q);
> void (*wait_finish)(struct vb2_queue *q);
>
> - int (*buf_init)(struct vb2_buffer *vb);
> - int (*buf_prepare)(struct vb2_buffer *vb);
> - void (*buf_finish)(struct vb2_buffer *vb);
> - void (*buf_cleanup)(struct vb2_buffer *vb);
> + int (*buf_init)(struct vb2_v4l2_buffer *vb);
> + int (*buf_prepare)(struct vb2_v4l2_buffer *vb);
> + void (*buf_finish)(struct vb2_v4l2_buffer *vb);
> + void (*buf_cleanup)(struct vb2_v4l2_buffer *vb);
>
> int (*start_streaming)(struct vb2_queue *q, unsigned int count);
> void (*stop_streaming)(struct vb2_queue *q);
>
> - void (*buf_queue)(struct vb2_buffer *vb);
> + void (*buf_queue)(struct vb2_v4l2_buffer *vb);
> };
>
> struct v4l2_fh;
> @@ -361,7 +367,7 @@ struct v4l2_fh;
> * @drv_priv: driver private data
> * @buf_struct_size: size of the driver-specific buffer structure;
> * "0" indicates the driver doesn't want to use a custom buffer
> - * structure type, so sizeof(struct vb2_buffer) will is used
> + * structure type, so sizeof(struct vb2_v4l2_buffer) will is used
> * @timestamp_flags: Timestamp flags; V4L2_BUF_FLAG_TIMESTAMP_* and
> * V4L2_BUF_FLAG_TSTAMP_SRC_*
> * @gfp_flags: additional gfp flags used when allocating the buffers.
> @@ -398,7 +404,7 @@ struct vb2_queue {
> unsigned int io_modes;
> unsigned int io_flags;
> struct mutex *lock;
> - struct v4l2_fh *owner;
> + void *owner;
Again, there's an extra tab here.
>
> const struct vb2_ops *ops;
> const struct vb2_mem_ops *mem_ops;
> @@ -411,7 +417,7 @@ struct vb2_queue {
> /* private: internal use only */
> struct mutex mmap_lock;
> enum v4l2_memory memory;
> - struct vb2_buffer *bufs[VIDEO_MAX_FRAME];
> + void *bufs[VIDEO_MAX_FRAME];
Again, there's an extra tab here.
> unsigned int num_buffers;
>
> struct list_head queued_list;
> @@ -446,10 +452,10 @@ struct vb2_queue {
> #endif
> };
>
> -void *vb2_plane_vaddr(struct vb2_buffer *vb, unsigned int plane_no);
> -void *vb2_plane_cookie(struct vb2_buffer *vb, unsigned int plane_no);
> +void *vb2_plane_vaddr(struct vb2_v4l2_buffer *vb, unsigned int plane_no);
> +void *vb2_plane_cookie(struct vb2_v4l2_buffer *vb, unsigned int plane_no);
>
> -void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state state);
> +void vb2_buffer_done(struct vb2_v4l2_buffer *vb, enum vb2_buffer_state
> state);
> void vb2_discard_done(struct vb2_queue *q);
> int vb2_wait_for_all_buffers(struct vb2_queue *q);
>
> @@ -489,7 +495,7 @@ size_t vb2_write(struct vb2_queue *q, const char __user
> *data, size_t count,
> *
> * This is called whenever a buffer is dequeued in the thread.
> */
> -typedef int (*vb2_thread_fnc)(struct vb2_buffer *vb, void *priv);
> +typedef int (*vb2_thread_fnc)(struct vb2_v4l2_buffer *vb, void *priv);
>
> /**
> * vb2_thread_start() - start a thread for the given queue.
> @@ -566,10 +572,10 @@ static inline void *vb2_get_drv_priv(struct vb2_queue
> *q)
> * @plane_no: plane number for which payload should be set
> * @size: payload in bytes
> */
> -static inline void vb2_set_plane_payload(struct vb2_buffer *vb,
> +static inline void vb2_set_plane_payload(struct vb2_v4l2_buffer *vb,
> unsigned int plane_no, unsigned long size)
> {
> - if (plane_no < vb->num_planes)
> + if (plane_no < vb->vb2.num_planes)
> vb->v4l2_planes[plane_no].bytesused = size;
> }
>
> @@ -579,10 +585,10 @@ static inline void vb2_set_plane_payload(struct
> vb2_buffer *vb,
> * @plane_no: plane number for which payload should be set
> * @size: payload in bytes
> */
> -static inline unsigned long vb2_get_plane_payload(struct vb2_buffer *vb,
> +static inline unsigned long vb2_get_plane_payload(struct vb2_v4l2_buffer *vb,
> unsigned int plane_no)
> {
> - if (plane_no < vb->num_planes)
> + if (plane_no < vb->vb2.num_planes)
> return vb->v4l2_planes[plane_no].bytesused;
> return 0;
> }
> @@ -593,9 +599,9 @@ static inline unsigned long vb2_get_plane_payload(struct
> vb2_buffer *vb,
> * @plane_no: plane number for which size should be returned
> */
> static inline unsigned long
> -vb2_plane_size(struct vb2_buffer *vb, unsigned int plane_no)
> +vb2_plane_size(struct vb2_v4l2_buffer *vb, unsigned int plane_no)
> {
> - if (plane_no < vb->num_planes)
> + if (plane_no < vb->vb2.num_planes)
> return vb->v4l2_planes[plane_no].length;
> return 0;
> }
> @@ -653,4 +659,4 @@ unsigned long vb2_fop_get_unmapped_area(struct file
> *file, unsigned long addr,
> void vb2_ops_wait_prepare(struct vb2_queue *vq);
> void vb2_ops_wait_finish(struct vb2_queue *vq);
>
> -#endif /* _MEDIA_VIDEOBUF2_CORE_H */
> +#endif /* _MEDIA_VIDEOBUF2_V4L2_H */
> diff --git a/include/media/videobuf2-vmalloc.h
> b/include/media/videobuf2-vmalloc.h
> index 93a76b4..a63fe66 100644
> --- a/include/media/videobuf2-vmalloc.h
> +++ b/include/media/videobuf2-vmalloc.h
> @@ -13,7 +13,7 @@
> #ifndef _MEDIA_VIDEOBUF2_VMALLOC_H
> #define _MEDIA_VIDEOBUF2_VMALLOC_H
>
> -#include <media/videobuf2-core.h>
> +#include <media/videobuf2-v4l2.h>
>
> extern const struct vb2_mem_ops vb2_vmalloc_memops;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
