Allow userspace applications to subscribe to control change events. This
can e.g. be used to monitor the 5V detect control to be notified when a
source is connected or disconnected.
Signed-off-by: Lars-Peter Clausen <l...@metafoo.de>
---
drivers/media/i2c/adv7604.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index 808360f..cf1cb5a 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -41,6 +41,7 @@
#include <media/adv7604.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
#include <media/v4l2-dv-timings.h>
#include <media/v4l2-of.h>
@@ -2356,6 +2357,8 @@ static const struct v4l2_ctrl_ops adv76xx_ctrl_ops = {
static const struct v4l2_subdev_core_ops adv76xx_core_ops = {
.log_status = adv76xx_log_status,
.interrupt_service_routine = adv76xx_isr,
+ .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+ .unsubscribe_event = v4l2_event_subdev_unsubscribe,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = adv76xx_g_register,
.s_register = adv76xx_s_register,
@@ -2833,7 +2836,7 @@ static int adv76xx_probe(struct i2c_client *client,
snprintf(sd->name, sizeof(sd->name), "%s %d-%04x",
id->name, i2c_adapter_id(client->adapter),
client->addr);
- sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
/*
* Verify that the chip is present. On ADV7604 the RD_INFO register only
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
