Hi, Laurent

On 8/1/2015 5:11 PM, Laurent Pinchart wrote:
Hi Josh,

Thank you for the patch.

On Friday 31 July 2015 18:33:32 Josh Wu wrote:
This patch will get the DT parameters of vsync/hsync polarity, and pass to
the platform data.

Also add a debug information for test purpose.

Signed-off-by: Josh Wu <josh...@atmel.com>
---

  drivers/media/platform/soc_camera/atmel-isi.c | 10 ++++++++++
  1 file changed, 10 insertions(+)

diff --git a/drivers/media/platform/soc_camera/atmel-isi.c
b/drivers/media/platform/soc_camera/atmel-isi.c index fe9247a..a7de55c
100644
--- a/drivers/media/platform/soc_camera/atmel-isi.c
+++ b/drivers/media/platform/soc_camera/atmel-isi.c
@@ -811,6 +811,11 @@ static int isi_camera_set_bus_param(struct
soc_camera_device *icd) if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
                cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING;

+       dev_dbg(icd->parent, "vsync is active %s, hsyc is active %s, pix clock 
is
sampling %s\n",
s/hsyc/hsync/

I'd write it as "vsync active %s, hsync active %s, sampling on pix clock %s
edge\n" with "falling" and "rising" instead of "fall" and "rise".

Thanks, I'll correct it.


+               common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW ? "low" : "high",
+               common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? "low" : "high",
+               common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING ? "fall" : "rise");
+
        if (isi->pdata.has_emb_sync)
                cfg1 |= ISI_CFG1_EMB_SYNC;
        if (isi->pdata.full_mode)
@@ -898,6 +903,11 @@ static int atmel_isi_probe_dt(struct atmel_isi *isi,
                goto err_probe_dt;
        }

+       if (ep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
+               isi->pdata.hsync_act_low = true;
+       if (ep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
+               isi->pdata.vsync_act_low = true;
While you're at it, how about setting has_emb_sync based on ep.bus_type and
pclk_act_falling from flags & V4L2_MBUS_PCLK_SAMPLE_FALLING ?

I will add the pclk_act_falling handling code as well. And rebase this patch on top of your dt modifications.

Best Regards
Josh Wu

  err_probe_dt:
        of_node_put(np);

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to