Em Fri, 28 Aug 2015 10:26:48 +0900
Junghak Sung <jh1009.s...@samsung.com> escreveu:
>
> Hello Mauro,
>
> First of all, thank you for your detailed review.
>
>
> On 08/27/2015 07:28 PM, Mauro Carvalho Chehab wrote:
> > Em Wed, 26 Aug 2015 20:59:29 +0900
> > Junghak Sung <jh1009.s...@samsung.com> escreveu:
> >
> >> Remove v4l2-specific stuff from struct vb2_buffer and add member variables
> >> related with buffer management.
> >>
> >> struct vb2_plane {
> >> <snip>
> >> /* plane information */
> >> unsigned int bytesused;
> >> unsigned int length;
> >> union {
> >> unsigned int offset;
> >> unsigned long userptr;
> >> int fd;
> >> } m;
> >> unsigned int data_offset;
> >> }
> >>
> >> struct vb2_buffer {
> >> <snip>
> >> /* buffer information */
> >> unsigned int num_planes;
> >> unsigned int index;
> >> unsigned int type;
> >> unsigned int memory;
> >>
> >> struct vb2_plane planes[VIDEO_MAX_PLANES];
> >> <snip>
> >> };
> >>
> >> And create struct vb2_v4l2_buffer as container buffer for v4l2 use.
> >>
> >> struct vb2_v4l2_buffer {
> >> struct vb2_buffer vb2_buf;
> >>
> >> __u32 flags;
> >> __u32 field;
> >> struct timeval timestamp;
> >> struct v4l2_timecode timecode;
> >> __u32 sequence;
> >> };
> >
> > The comments seemed a little hard for me to read, but the changes
> > look ok.
> >
>
> Ok, I will modify these comments more clearly at next round.
>
> > I made some comments mostly regarding to documentation. See below.
> >
> >> This patch includes only changes inside of videobuf2. So, it is required to
> >> modify all device drivers which use videobuf2.
> >
> > So, in practice, we need to fold both patches 2 and 3 when merging upstream,
> > to avoid breaking git bisectability.
> >
>
> I'm sorry, but I can not understand the meaning of "fold both patches".
> Would you please explain more detailed what should I do at next round.
> If these two patches are get together to one patch, the size will
> be over 300KB, which causes a size problem to send it to ML.
No. What I'm meaning is that reviewers/(sub)maintainers need to be reminded
that patches 2 and 3 should be merged together when the patches got applied,
as otherwise they'll break the compilation.
So, just add a notice on the next patch series, but keep them as two
separate patches ;)
Regards,
Mauro
>
> >>
> >> Signed-off-by: Junghak Sung <jh1009.s...@samsung.com>
> >> Signed-off-by: Geunyoung Kim <nenggun....@samsung.com>
> >> Acked-by: Seung-Woo Kim <sw0312....@samsung.com>
> >> Acked-by: Inki Dae <inki....@samsung.com>
> >> ---
> >> drivers/media/v4l2-core/videobuf2-core.c | 324
> >> +++++++++++++++++-------------
> >> include/media/videobuf2-core.h | 50 ++---
> >> include/media/videobuf2-v4l2.h | 26 +++
> >> 3 files changed, 236 insertions(+), 164 deletions(-)
> >>
> >> diff --git a/drivers/media/v4l2-core/videobuf2-core.c
> >> b/drivers/media/v4l2-core/videobuf2-core.c
> >> index ab00ea0..9266d50 100644
> >> --- a/drivers/media/v4l2-core/videobuf2-core.c
> >> +++ b/drivers/media/v4l2-core/videobuf2-core.c
> >> @@ -35,10 +35,10 @@
> >> static int debug;
> >> module_param(debug, int, 0644);
> >>
> >> -#define dprintk(level, fmt, arg...)
> >> \
> >> - do { \
> >> - if (debug >= level) \
> >> - pr_info("vb2: %s: " fmt, __func__, ## arg); \
> >> +#define dprintk(level, fmt, arg...)
> >> \
> >> + do { \
> >> + if (debug >= level) \
> >> + pr_info("vb2: %s: " fmt, __func__, ## arg); \
> >> } while (0)
> >>
> >> #ifdef CONFIG_VIDEO_ADV_DEBUG
> >> @@ -53,7 +53,7 @@ module_param(debug, int, 0644);
> >>
> >> #define log_memop(vb, op)
> >> \
> >> dprintk(2, "call_memop(%p, %d, %s)%s\n", \
> >> - (vb)->vb2_queue, (vb)->v4l2_buf.index, #op, \
> >> + (vb)->vb2_queue, (vb)->index, #op, \
> >> (vb)->vb2_queue->mem_ops->op ? "" : " (nop)")
> >>
> >> #define call_memop(vb, op, args...)
> >> \
> >> @@ -115,7 +115,7 @@ module_param(debug, int, 0644);
> >>
> >> #define log_vb_qop(vb, op, args...)
> >> \
> >> dprintk(2, "call_vb_qop(%p, %d, %s)%s\n", \
> >> - (vb)->vb2_queue, (vb)->v4l2_buf.index, #op, \
> >> + (vb)->vb2_queue, (vb)->index, #op, \
> >> (vb)->vb2_queue->ops->op ? "" : " (nop)")
> >>
> >> #define call_vb_qop(vb, op, args...)
> >> \
> >> @@ -205,13 +205,13 @@ static int __vb2_buf_mem_alloc(struct vb2_buffer *vb)
> >> unsigned long size = PAGE_ALIGN(q->plane_sizes[plane]);
> >>
> >> mem_priv = call_ptr_memop(vb, alloc, q->alloc_ctx[plane],
> >> - size, dma_dir, q->gfp_flags);
> >> + size, dma_dir, q->gfp_flags);
> >> if (IS_ERR_OR_NULL(mem_priv))
> >> goto free;
> >>
> >> /* Associate allocator private data with this plane */
> >> vb->planes[plane].mem_priv = mem_priv;
> >> - vb->v4l2_planes[plane].length = q->plane_sizes[plane];
> >> + vb->planes[plane].length = q->plane_sizes[plane];
> >> }
> >>
> >> return 0;
> >> @@ -235,8 +235,7 @@ static void __vb2_buf_mem_free(struct vb2_buffer *vb)
> >> for (plane = 0; plane < vb->num_planes; ++plane) {
> >> call_void_memop(vb, put, vb->planes[plane].mem_priv);
> >> vb->planes[plane].mem_priv = NULL;
> >> - dprintk(3, "freed plane %d of buffer %d\n", plane,
> >> - vb->v4l2_buf.index);
> >> + dprintk(3, "freed plane %d of buffer %d\n", plane, vb->index);
> >> }
> >> }
> >>
> >> @@ -269,7 +268,9 @@ static void __vb2_plane_dmabuf_put(struct vb2_buffer
> >> *vb, struct vb2_plane *p)
> >>
> >> call_void_memop(vb, detach_dmabuf, p->mem_priv);
> >> dma_buf_put(p->dbuf);
> >> - memset(p, 0, sizeof(*p));
> >> + p->mem_priv = NULL;
> >> + p->dbuf = NULL;
> >> + p->dbuf_mapped = 0;
> >> }
> >>
> >> /**
> >> @@ -299,7 +300,7 @@ static void __setup_lengths(struct vb2_queue *q,
> >> unsigned int n)
> >> continue;
> >>
> >> for (plane = 0; plane < vb->num_planes; ++plane)
> >> - vb->v4l2_planes[plane].length = q->plane_sizes[plane];
> >> + vb->planes[plane].length = q->plane_sizes[plane];
> >> }
> >> }
> >>
> >> @@ -314,10 +315,10 @@ static void __setup_offsets(struct vb2_queue *q,
> >> unsigned int n)
> >> unsigned long off;
> >>
> >> if (q->num_buffers) {
> >> - struct v4l2_plane *p;
> >> + struct vb2_plane *p;
> >> vb = q->bufs[q->num_buffers - 1];
> >> - p = &vb->v4l2_planes[vb->num_planes - 1];
> >> - off = PAGE_ALIGN(p->m.mem_offset + p->length);
> >> + p = &vb->planes[vb->num_planes - 1];
> >> + off = PAGE_ALIGN(p->m.offset + p->length);
> >> } else {
> >> off = 0;
> >> }
> >> @@ -328,12 +329,12 @@ static void __setup_offsets(struct vb2_queue *q,
> >> unsigned int n)
> >> continue;
> >>
> >> for (plane = 0; plane < vb->num_planes; ++plane) {
> >> - vb->v4l2_planes[plane].m.mem_offset = off;
> >> + vb->planes[plane].m.offset = off;
> >>
> >> dprintk(3, "buffer %d, plane %d offset 0x%08lx\n",
> >> buffer, plane, off);
> >>
> >> - off += vb->v4l2_planes[plane].length;
> >> + off += vb->planes[plane].length;
> >> off = PAGE_ALIGN(off);
> >> }
> >> }
> >> @@ -347,7 +348,7 @@ static void __setup_offsets(struct vb2_queue *q,
> >> unsigned int n)
> >> * Returns the number of buffers successfully allocated.
> >> */
> >> static int __vb2_queue_alloc(struct vb2_queue *q, enum v4l2_memory
> >> memory,
> >> - unsigned int num_buffers, unsigned int num_planes)
> >> + unsigned int num_buffers, unsigned int num_planes)
> >> {
> >> unsigned int buffer;
> >> struct vb2_buffer *vb;
> >> @@ -361,16 +362,12 @@ static int __vb2_queue_alloc(struct vb2_queue *q,
> >> enum v4l2_memory memory,
> >> break;
> >> }
> >>
> >> - /* Length stores number of planes for multiplanar buffers */
> >> - if (V4L2_TYPE_IS_MULTIPLANAR(q->type))
> >> - vb->v4l2_buf.length = num_planes;
> >> -
> >> vb->state = VB2_BUF_STATE_DEQUEUED;
> >> vb->vb2_queue = q;
> >> vb->num_planes = num_planes;
> >> - vb->v4l2_buf.index = q->num_buffers + buffer;
> >> - vb->v4l2_buf.type = q->type;
> >> - vb->v4l2_buf.memory = memory;
> >> + vb->index = q->num_buffers + buffer;
> >> + vb->type = q->type;
> >> + vb->memory = memory;
> >>
> >> /* Allocate video buffer memory for the MMAP type */
> >> if (memory == V4L2_MEMORY_MMAP) {
> >> @@ -418,7 +415,7 @@ static void __vb2_free_mem(struct vb2_queue *q,
> >> unsigned int buffers)
> >> struct vb2_buffer *vb;
> >>
> >> for (buffer = q->num_buffers - buffers; buffer < q->num_buffers;
> >> - ++buffer) {
> >> + ++buffer) {
> >> vb = q->bufs[buffer];
> >> if (!vb)
> >> continue;
> >> @@ -451,7 +448,7 @@ static int __vb2_queue_free(struct vb2_queue *q,
> >> unsigned int buffers)
> >> * just return -EAGAIN.
> >> */
> >> for (buffer = q->num_buffers - buffers; buffer < q->num_buffers;
> >> - ++buffer) {
> >> + ++buffer) {
> >> if (q->bufs[buffer] == NULL)
> >> continue;
> >> if (q->bufs[buffer]->state == VB2_BUF_STATE_PREPARING) {
> >> @@ -462,7 +459,7 @@ static int __vb2_queue_free(struct vb2_queue *q,
> >> unsigned int buffers)
> >>
> >> /* Call driver-provided cleanup function for each buffer, if provided */
> >> for (buffer = q->num_buffers - buffers; buffer < q->num_buffers;
> >> - ++buffer) {
> >> + ++buffer) {
> >> struct vb2_buffer *vb = q->bufs[buffer];
> >>
> >> if (vb && vb->planes[0].mem_priv)
> >> @@ -536,7 +533,7 @@ static int __vb2_queue_free(struct vb2_queue *q,
> >> unsigned int buffers)
> >>
> >> /* Free videobuf buffers */
> >> for (buffer = q->num_buffers - buffers; buffer < q->num_buffers;
> >> - ++buffer) {
> >> + ++buffer) {
> >> kfree(q->bufs[buffer]);
> >> q->bufs[buffer] = NULL;
> >> }
> >> @@ -590,23 +587,22 @@ static int __verify_length(struct vb2_buffer *vb,
> >> const struct v4l2_buffer *b)
> >> if (V4L2_TYPE_IS_MULTIPLANAR(b->type)) {
> >> for (plane = 0; plane < vb->num_planes; ++plane) {
> >> length = (b->memory == V4L2_MEMORY_USERPTR ||
> >> - b->memory == V4L2_MEMORY_DMABUF)
> >> - ? b->m.planes[plane].length
> >> - : vb->v4l2_planes[plane].length;
> >> + b->memory == V4L2_MEMORY_DMABUF)
> >> + ? b->m.planes[plane].length
> >> + : vb->planes[plane].length;
> >> bytesused = b->m.planes[plane].bytesused
> >> - ? b->m.planes[plane].bytesused : length;
> >> + ? b->m.planes[plane].bytesused : length;
> >>
> >> if (b->m.planes[plane].bytesused > length)
> >> return -EINVAL;
> >>
> >> if (b->m.planes[plane].data_offset > 0 &&
> >> - b->m.planes[plane].data_offset >= bytesused)
> >> + b->m.planes[plane].data_offset >= bytesused)
> >> return -EINVAL;
> >> }
> >> } else {
> >> length = (b->memory == V4L2_MEMORY_USERPTR)
> >> - ? b->length : vb->v4l2_planes[0].length;
> >> - bytesused = b->bytesused ? b->bytesused : length;
> >> + ? b->length : vb->planes[0].length;
> >>
> >> if (b->bytesused > length)
> >> return -EINVAL;
> >> @@ -656,12 +652,21 @@ static bool __buffers_in_use(struct vb2_queue *q)
> >> */
> >> static void __fill_v4l2_buffer(struct vb2_buffer *vb, struct v4l2_buffer
> >> *b)
> >> {
> >> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> >> struct vb2_queue *q = vb->vb2_queue;
> >> + unsigned int plane;
> >>
> >> /* Copy back data such as timestamp, flags, etc. */
> >> - memcpy(b, &vb->v4l2_buf, offsetof(struct v4l2_buffer, m));
> >> - b->reserved2 = vb->v4l2_buf.reserved2;
> >> - b->reserved = vb->v4l2_buf.reserved;
> >> + b->index = vb->index;
> >> + b->type = vb->type;
> >> + b->memory = vb->memory;
> >> + b->bytesused = 0;
> >> +
> >> + b->flags = vbuf->flags;
> >> + b->field = vbuf->field;
> >> + b->timestamp = vbuf->timestamp;
> >> + b->timecode = vbuf->timecode;
> >> + b->sequence = vbuf->sequence;
> >>
> >> if (V4L2_TYPE_IS_MULTIPLANAR(q->type)) {
> >> /*
> >> @@ -669,21 +674,33 @@ static void __fill_v4l2_buffer(struct vb2_buffer
> >> *vb, struct v4l2_buffer *b)
> >> * for it. The caller has already verified memory and size.
> >> */
> >> b->length = vb->num_planes;
> >> - memcpy(b->m.planes, vb->v4l2_planes,
> >> - b->length * sizeof(struct v4l2_plane));
> >> + for (plane = 0; plane < vb->num_planes; ++plane) {
> >> + struct v4l2_plane *pdst = &b->m.planes[plane];
> >> + struct vb2_plane *psrc = &vb->planes[plane];
> >> +
> >> + pdst->bytesused = psrc->bytesused;
> >> + pdst->length = psrc->length;
> >> + if (q->memory == V4L2_MEMORY_MMAP)
> >> + pdst->m.mem_offset = psrc->m.offset;
> >> + else if (q->memory == V4L2_MEMORY_USERPTR)
> >> + pdst->m.userptr = psrc->m.userptr;
> >> + else if (q->memory == V4L2_MEMORY_DMABUF)
> >> + pdst->m.fd = psrc->m.fd;
> >> + pdst->data_offset = psrc->data_offset;
> >> + }
> >> } else {
> >> /*
> >> * We use length and offset in v4l2_planes array even for
> >> * single-planar buffers, but userspace does not.
> >> */
> >> - b->length = vb->v4l2_planes[0].length;
> >> - b->bytesused = vb->v4l2_planes[0].bytesused;
> >> + b->length = vb->planes[0].length;
> >> + b->bytesused = vb->planes[0].bytesused;
> >> if (q->memory == V4L2_MEMORY_MMAP)
> >> - b->m.offset = vb->v4l2_planes[0].m.mem_offset;
> >> + b->m.offset = vb->planes[0].m.offset;
> >> else if (q->memory == V4L2_MEMORY_USERPTR)
> >> - b->m.userptr = vb->v4l2_planes[0].m.userptr;
> >> + b->m.userptr = vb->planes[0].m.userptr;
> >> else if (q->memory == V4L2_MEMORY_DMABUF)
> >> - b->m.fd = vb->v4l2_planes[0].m.fd;
> >> + b->m.fd = vb->planes[0].m.fd;
> >> }
> >>
> >> /*
> >> @@ -692,7 +709,7 @@ static void __fill_v4l2_buffer(struct vb2_buffer *vb,
> >> struct v4l2_buffer *b)
> >> b->flags &= ~V4L2_BUFFER_MASK_FLAGS;
> >> b->flags |= q->timestamp_flags & V4L2_BUF_FLAG_TIMESTAMP_MASK;
> >> if ((q->timestamp_flags & V4L2_BUF_FLAG_TIMESTAMP_MASK) !=
> >> - V4L2_BUF_FLAG_TIMESTAMP_COPY) {
> >> + V4L2_BUF_FLAG_TIMESTAMP_COPY) {
> >> /*
> >> * For non-COPY timestamps, drop timestamp source bits
> >> * and obtain the timestamp source from the queue.
> >> @@ -767,7 +784,7 @@ EXPORT_SYMBOL(vb2_querybuf);
> >> static int __verify_userptr_ops(struct vb2_queue *q)
> >> {
> >> if (!(q->io_modes & VB2_USERPTR) || !q->mem_ops->get_userptr ||
> >> - !q->mem_ops->put_userptr)
> >> + !q->mem_ops->put_userptr)
> >> return -EINVAL;
> >>
> >> return 0;
> >> @@ -780,7 +797,7 @@ static int __verify_userptr_ops(struct vb2_queue *q)
> >> static int __verify_mmap_ops(struct vb2_queue *q)
> >> {
> >> if (!(q->io_modes & VB2_MMAP) || !q->mem_ops->alloc ||
> >> - !q->mem_ops->put || !q->mem_ops->mmap)
> >> + !q->mem_ops->put || !q->mem_ops->mmap)
> >> return -EINVAL;
> >>
> >> return 0;
> >> @@ -793,8 +810,8 @@ static int __verify_mmap_ops(struct vb2_queue *q)
> >> static int __verify_dmabuf_ops(struct vb2_queue *q)
> >> {
> >> if (!(q->io_modes & VB2_DMABUF) || !q->mem_ops->attach_dmabuf ||
> >> - !q->mem_ops->detach_dmabuf || !q->mem_ops->map_dmabuf ||
> >> - !q->mem_ops->unmap_dmabuf)
> >> + !q->mem_ops->detach_dmabuf || !q->mem_ops->map_dmabuf ||
> >> + !q->mem_ops->unmap_dmabuf)
> >> return -EINVAL;
> >>
> >> return 0;
> >> @@ -808,7 +825,7 @@ static int __verify_memory_type(struct vb2_queue *q,
> >> enum v4l2_memory memory, enum v4l2_buf_type type)
> >> {
> >> if (memory != V4L2_MEMORY_MMAP && memory != V4L2_MEMORY_USERPTR &&
> >> - memory != V4L2_MEMORY_DMABUF) {
> >> + memory != V4L2_MEMORY_DMABUF) {
> >> dprintk(1, "unsupported memory type\n");
> >> return -EINVAL;
> >> }
> >> @@ -927,7 +944,7 @@ static int __reqbufs(struct vb2_queue *q, struct
> >> v4l2_requestbuffers *req)
> >> * Driver also sets the size and allocator context for each plane.
> >> */
> >> ret = call_qop(q, queue_setup, q, NULL, &num_buffers, &num_planes,
> >> - q->plane_sizes, q->alloc_ctx);
> >> + q->plane_sizes, q->alloc_ctx);
> >> if (ret)
> >> return ret;
> >>
> >> @@ -952,7 +969,7 @@ static int __reqbufs(struct vb2_queue *q, struct
> >> v4l2_requestbuffers *req)
> >> num_buffers = allocated_buffers;
> >>
> >> ret = call_qop(q, queue_setup, q, NULL, &num_buffers,
> >> - &num_planes, q->plane_sizes, q->alloc_ctx);
> >> + &num_planes, q->plane_sizes, q->alloc_ctx);
> >>
> >> if (!ret && allocated_buffers < num_buffers)
> >> ret = -ENOMEM;
> >> @@ -1040,7 +1057,7 @@ static int __create_bufs(struct vb2_queue *q, struct
> >> v4l2_create_buffers *create
> >> * buffer and their sizes are acceptable
> >> */
> >> ret = call_qop(q, queue_setup, q, &create->format, &num_buffers,
> >> - &num_planes, q->plane_sizes, q->alloc_ctx);
> >> + &num_planes, q->plane_sizes, q->alloc_ctx);
> >> if (ret)
> >> return ret;
> >>
> >> @@ -1063,7 +1080,7 @@ static int __create_bufs(struct vb2_queue *q, struct
> >> v4l2_create_buffers *create
> >> * queue driver has set up
> >> */
> >> ret = call_qop(q, queue_setup, q, &create->format, &num_buffers,
> >> - &num_planes, q->plane_sizes, q->alloc_ctx);
> >> + &num_planes, q->plane_sizes, q->alloc_ctx);
> >>
> >> if (!ret && allocated_buffers < num_buffers)
> >> ret = -ENOMEM;
> >> @@ -1183,8 +1200,8 @@ void vb2_buffer_done(struct vb2_buffer *vb, enum
> >> vb2_buffer_state state)
> >> return;
> >>
> >> if (WARN_ON(state != VB2_BUF_STATE_DONE &&
> >> - state != VB2_BUF_STATE_ERROR &&
> >> - state != VB2_BUF_STATE_QUEUED))
> >> + state != VB2_BUF_STATE_ERROR &&
> >> + state != VB2_BUF_STATE_QUEUED))
> >> state = VB2_BUF_STATE_ERROR;
> >>
> >> #ifdef CONFIG_VIDEO_ADV_DEBUG
> >> @@ -1195,7 +1212,7 @@ void vb2_buffer_done(struct vb2_buffer *vb, enum
> >> vb2_buffer_state state)
> >> vb->cnt_buf_done++;
> >> #endif
> >> dprintk(4, "done processing on buffer %d, state: %d\n",
> >> - vb->v4l2_buf.index, state);
> >> + vb->index, state);
> >>
> >> /* sync buffers */
> >> for (plane = 0; plane < vb->num_planes; ++plane)
> >> @@ -1268,25 +1285,26 @@ static void vb2_warn_zero_bytesused(struct
> >> vb2_buffer *vb)
> >> * v4l2_buffer by the userspace. The caller has already verified that
> >> struct
> >> * v4l2_buffer has a valid number of planes.
> >> */
> >> -static void __fill_vb2_buffer(struct vb2_buffer *vb, const struct
> >> v4l2_buffer *b,
> >> - struct v4l2_plane *v4l2_planes)
> >> +static void __fill_vb2_buffer(struct vb2_buffer *vb,
> >> + const struct v4l2_buffer *b, struct vb2_plane *planes)
> >> {
> >> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> >> unsigned int plane;
> >>
> >> if (V4L2_TYPE_IS_MULTIPLANAR(b->type)) {
> >> if (b->memory == V4L2_MEMORY_USERPTR) {
> >> for (plane = 0; plane < vb->num_planes; ++plane) {
> >> - v4l2_planes[plane].m.userptr =
> >> + planes[plane].m.userptr =
> >> b->m.planes[plane].m.userptr;
> >> - v4l2_planes[plane].length =
> >> + planes[plane].length =
> >> b->m.planes[plane].length;
> >> }
> >> }
> >> if (b->memory == V4L2_MEMORY_DMABUF) {
> >> for (plane = 0; plane < vb->num_planes; ++plane) {
> >> - v4l2_planes[plane].m.fd =
> >> + planes[plane].m.fd =
> >> b->m.planes[plane].m.fd;
> >> - v4l2_planes[plane].length =
> >> + planes[plane].length =
> >> b->m.planes[plane].length;
> >> }
> >> }
> >> @@ -1310,7 +1328,7 @@ static void __fill_vb2_buffer(struct vb2_buffer *vb,
> >> const struct v4l2_buffer *b
> >> * applications working.
> >> */
> >> for (plane = 0; plane < vb->num_planes; ++plane) {
> >> - struct v4l2_plane *pdst = &v4l2_planes[plane];
> >> + struct vb2_plane *pdst = &planes[plane];
> >> struct v4l2_plane *psrc = &b->m.planes[plane];
> >>
> >> if (psrc->bytesused == 0)
> >> @@ -1340,13 +1358,13 @@ static void __fill_vb2_buffer(struct vb2_buffer
> >> *vb, const struct v4l2_buffer *b
> >> * old userspace applications working.
> >> */
> >> if (b->memory == V4L2_MEMORY_USERPTR) {
> >> - v4l2_planes[0].m.userptr = b->m.userptr;
> >> - v4l2_planes[0].length = b->length;
> >> + planes[0].m.userptr = b->m.userptr;
> >> + planes[0].length = b->length;
> >> }
> >>
> >> if (b->memory == V4L2_MEMORY_DMABUF) {
> >> - v4l2_planes[0].m.fd = b->m.fd;
> >> - v4l2_planes[0].length = b->length;
> >> + planes[0].m.fd = b->m.fd;
> >> + planes[0].length = b->length;
> >> }
> >>
> >> if (V4L2_TYPE_IS_OUTPUT(b->type)) {
> >> @@ -1354,25 +1372,26 @@ static void __fill_vb2_buffer(struct vb2_buffer
> >> *vb, const struct v4l2_buffer *b
> >> vb2_warn_zero_bytesused(vb);
> >>
> >> if (vb->vb2_queue->allow_zero_bytesused)
> >> - v4l2_planes[0].bytesused = b->bytesused;
> >> + planes[0].bytesused = b->bytesused;
> >> else
> >> - v4l2_planes[0].bytesused = b->bytesused ?
> >> - b->bytesused : v4l2_planes[0].length;
> >> + planes[0].bytesused = b->bytesused ?
> >> + b->bytesused : planes[0].length;
> >> } else
> >> - v4l2_planes[0].bytesused = 0;
> >> + planes[0].bytesused = 0;
> >>
> >> }
> >>
> >> /* Zero flags that the vb2 core handles */
> >> - vb->v4l2_buf.flags = b->flags & ~V4L2_BUFFER_MASK_FLAGS;
> >> + vbuf->flags = b->flags & ~V4L2_BUFFER_MASK_FLAGS;
> >> if ((vb->vb2_queue->timestamp_flags & V4L2_BUF_FLAG_TIMESTAMP_MASK) !=
> >> - V4L2_BUF_FLAG_TIMESTAMP_COPY || !V4L2_TYPE_IS_OUTPUT(b->type)) {
> >> + V4L2_BUF_FLAG_TIMESTAMP_COPY ||
> >> + !V4L2_TYPE_IS_OUTPUT(b->type)) {
> >> /*
> >> * Non-COPY timestamps and non-OUTPUT queues will get
> >> * their timestamp and timestamp source flags from the
> >> * queue.
> >> */
> >> - vb->v4l2_buf.flags &= ~V4L2_BUF_FLAG_TSTAMP_SRC_MASK;
> >> + vbuf->flags &= ~V4L2_BUF_FLAG_TSTAMP_SRC_MASK;
> >> }
> >>
> >> if (V4L2_TYPE_IS_OUTPUT(b->type)) {
> >> @@ -1382,11 +1401,11 @@ static void __fill_vb2_buffer(struct vb2_buffer
> >> *vb, const struct v4l2_buffer *b
> >> * The 'field' is valid metadata for this output buffer
> >> * and so that needs to be copied here.
> >> */
> >> - vb->v4l2_buf.flags &= ~V4L2_BUF_FLAG_TIMECODE;
> >> - vb->v4l2_buf.field = b->field;
> >> + vbuf->flags &= ~V4L2_BUF_FLAG_TIMECODE;
> >> + vbuf->field = b->field;
> >> } else {
> >> /* Zero any output buffer flags as this is a capture buffer */
> >> - vb->v4l2_buf.flags &= ~V4L2_BUFFER_OUT_FLAGS;
> >> + vbuf->flags &= ~V4L2_BUFFER_OUT_FLAGS;
> >> }
> >> }
> >>
> >> @@ -1395,7 +1414,7 @@ static void __fill_vb2_buffer(struct vb2_buffer *vb,
> >> const struct v4l2_buffer *b
> >> */
> >> static int __qbuf_mmap(struct vb2_buffer *vb, const struct v4l2_buffer
> >> *b)
> >> {
> >> - __fill_vb2_buffer(vb, b, vb->v4l2_planes);
> >> + __fill_vb2_buffer(vb, b, vb->planes);
> >> return call_vb_qop(vb, buf_prepare, vb);
> >> }
> >>
> >> @@ -1404,7 +1423,7 @@ static int __qbuf_mmap(struct vb2_buffer *vb, const
> >> struct v4l2_buffer *b)
> >> */
> >> static int __qbuf_userptr(struct vb2_buffer *vb, const struct
> >> v4l2_buffer *b)
> >> {
> >> - struct v4l2_plane planes[VIDEO_MAX_PLANES];
> >> + struct vb2_plane planes[VIDEO_MAX_PLANES];
> >> struct vb2_queue *q = vb->vb2_queue;
> >> void *mem_priv;
> >> unsigned int plane;
> >> @@ -1419,9 +1438,9 @@ static int __qbuf_userptr(struct vb2_buffer *vb,
> >> const struct v4l2_buffer *b)
> >>
> >> for (plane = 0; plane < vb->num_planes; ++plane) {
> >> /* Skip the plane if already verified */
> >> - if (vb->v4l2_planes[plane].m.userptr &&
> >> - vb->v4l2_planes[plane].m.userptr == planes[plane].m.userptr
> >> - && vb->v4l2_planes[plane].length == planes[plane].length)
> >> + if (vb->planes[plane].m.userptr &&
> >> + vb->planes[plane].m.userptr == planes[plane].m.userptr
> >> + && vb->planes[plane].length == planes[plane].length)
> >> continue;
> >>
> >> dprintk(3, "userspace address for plane %d changed, "
> >> @@ -1447,12 +1466,15 @@ static int __qbuf_userptr(struct vb2_buffer *vb,
> >> const struct v4l2_buffer *b)
> >> }
> >>
> >> vb->planes[plane].mem_priv = NULL;
> >> - memset(&vb->v4l2_planes[plane], 0, sizeof(struct v4l2_plane));
> >> + vb->planes[plane].bytesused = 0;
> >> + vb->planes[plane].length = 0;
> >> + vb->planes[plane].m.userptr = 0;
> >> + vb->planes[plane].data_offset = 0;
> >>
> >> /* Acquire each plane's memory */
> >> mem_priv = call_ptr_memop(vb, get_userptr, q->alloc_ctx[plane],
> >> - planes[plane].m.userptr,
> >> - planes[plane].length, dma_dir);
> >> + planes[plane].m.userptr,
> >> + planes[plane].length, dma_dir);
> >> if (IS_ERR_OR_NULL(mem_priv)) {
> >> dprintk(1, "failed acquiring userspace "
> >> "memory for plane %d\n", plane);
> >> @@ -1466,8 +1488,12 @@ static int __qbuf_userptr(struct vb2_buffer *vb,
> >> const struct v4l2_buffer *b)
> >> * Now that everything is in order, copy relevant information
> >> * provided by userspace.
> >> */
> >> - for (plane = 0; plane < vb->num_planes; ++plane)
> >> - vb->v4l2_planes[plane] = planes[plane];
> >> + for (plane = 0; plane < vb->num_planes; ++plane) {
> >> + vb->planes[plane].bytesused = planes[plane].bytesused;
> >> + vb->planes[plane].length = planes[plane].length;
> >> + vb->planes[plane].m.userptr = planes[plane].m.userptr;
> >> + vb->planes[plane].data_offset = planes[plane].data_offset;
> >> + }
> >>
> >> if (reacquired) {
> >> /*
> >> @@ -1494,10 +1520,11 @@ err:
> >> /* In case of errors, release planes that were already acquired */
> >> for (plane = 0; plane < vb->num_planes; ++plane) {
> >> if (vb->planes[plane].mem_priv)
> >> - call_void_memop(vb, put_userptr,
> >> vb->planes[plane].mem_priv);
> >> + call_void_memop(vb, put_userptr,
> >> + vb->planes[plane].mem_priv);
> >> vb->planes[plane].mem_priv = NULL;
> >> - vb->v4l2_planes[plane].m.userptr = 0;
> >> - vb->v4l2_planes[plane].length = 0;
> >> + vb->planes[plane].m.userptr = 0;
> >> + vb->planes[plane].length = 0;
> >> }
> >>
> >> return ret;
> >> @@ -1508,7 +1535,7 @@ err:
> >> */
> >> static int __qbuf_dmabuf(struct vb2_buffer *vb, const struct v4l2_buffer
> >> *b)
> >> {
> >> - struct v4l2_plane planes[VIDEO_MAX_PLANES];
> >> + struct vb2_plane planes[VIDEO_MAX_PLANES];
> >> struct vb2_queue *q = vb->vb2_queue;
> >> void *mem_priv;
> >> unsigned int plane;
> >> @@ -1544,7 +1571,7 @@ static int __qbuf_dmabuf(struct vb2_buffer *vb,
> >> const struct v4l2_buffer *b)
> >>
> >> /* Skip the plane if already verified */
> >> if (dbuf == vb->planes[plane].dbuf &&
> >> - vb->v4l2_planes[plane].length == planes[plane].length) {
> >> + vb->planes[plane].length == planes[plane].length) {
> >> dma_buf_put(dbuf);
> >> continue;
> >> }
> >> @@ -1558,11 +1585,15 @@ static int __qbuf_dmabuf(struct vb2_buffer *vb,
> >> const struct v4l2_buffer *b)
> >>
> >> /* Release previously acquired memory if present */
> >> __vb2_plane_dmabuf_put(vb, &vb->planes[plane]);
> >> - memset(&vb->v4l2_planes[plane], 0, sizeof(struct v4l2_plane));
> >> + vb->planes[plane].bytesused = 0;
> >> + vb->planes[plane].length = 0;
> >> + vb->planes[plane].m.fd = 0;
> >> + vb->planes[plane].data_offset = 0;
> >>
> >> /* Acquire each plane's memory */
> >> - mem_priv = call_ptr_memop(vb, attach_dmabuf,
> >> q->alloc_ctx[plane],
> >> - dbuf, planes[plane].length, dma_dir);
> >> + mem_priv = call_ptr_memop(vb, attach_dmabuf,
> >> + q->alloc_ctx[plane], dbuf, planes[plane].length,
> >> + dma_dir);
> >> if (IS_ERR(mem_priv)) {
> >> dprintk(1, "failed to attach dmabuf\n");
> >> ret = PTR_ERR(mem_priv);
> >> @@ -1592,8 +1623,12 @@ static int __qbuf_dmabuf(struct vb2_buffer *vb,
> >> const struct v4l2_buffer *b)
> >> * Now that everything is in order, copy relevant information
> >> * provided by userspace.
> >> */
> >> - for (plane = 0; plane < vb->num_planes; ++plane)
> >> - vb->v4l2_planes[plane] = planes[plane];
> >> + for (plane = 0; plane < vb->num_planes; ++plane) {
> >> + vb->planes[plane].bytesused = planes[plane].bytesused;
> >> + vb->planes[plane].length = planes[plane].length;
> >> + vb->planes[plane].m.fd = planes[plane].m.userptr;
> >> + vb->planes[plane].data_offset = planes[plane].data_offset;
> >> + }
> >>
> >> if (reacquired) {
> >> /*
> >> @@ -1644,6 +1679,7 @@ static void __enqueue_in_driver(struct vb2_buffer
> >> *vb)
> >>
> >> static int __buf_prepare(struct vb2_buffer *vb, const struct v4l2_buffer
> >> *b)
> >> {
> >> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> >> struct vb2_queue *q = vb->vb2_queue;
> >> int ret;
> >>
> >> @@ -1672,9 +1708,9 @@ static int __buf_prepare(struct vb2_buffer *vb,
> >> const struct v4l2_buffer *b)
> >> }
> >>
> >> vb->state = VB2_BUF_STATE_PREPARING;
> >> - vb->v4l2_buf.timestamp.tv_sec = 0;
> >> - vb->v4l2_buf.timestamp.tv_usec = 0;
> >> - vb->v4l2_buf.sequence = 0;
> >> + vbuf->timestamp.tv_sec = 0;
> >> + vbuf->timestamp.tv_usec = 0;
> >> + vbuf->sequence = 0;
> >>
> >> switch (q->memory) {
> >> case V4L2_MEMORY_MMAP:
> >> @@ -1701,7 +1737,7 @@ static int __buf_prepare(struct vb2_buffer *vb,
> >> const struct v4l2_buffer *b)
> >> }
> >>
> >> static int vb2_queue_or_prepare_buf(struct vb2_queue *q, struct
> >> v4l2_buffer *b,
> >> - const char *opname)
> >> + const char *opname)
> >> {
> >> if (b->type != q->type) {
> >> dprintk(1, "%s: invalid buffer type\n", opname);
> >> @@ -1768,7 +1804,7 @@ int vb2_prepare_buf(struct vb2_queue *q, struct
> >> v4l2_buffer *b)
> >> /* Fill buffer information for the userspace */
> >> __fill_v4l2_buffer(vb, b);
> >>
> >> - dprintk(1, "prepare of buffer %d succeeded\n",
> >> vb->v4l2_buf.index);
> >> + dprintk(1, "prepare of buffer %d succeeded\n", vb->index);
> >> }
> >> return ret;
> >> }
> >> @@ -1800,7 +1836,7 @@ static int vb2_start_streaming(struct vb2_queue *q)
> >> /* Tell the driver to start streaming */
> >> q->start_streaming_called = 1;
> >> ret = call_qop(q, start_streaming, q,
> >> - atomic_read(&q->owned_by_drv_count));
> >> + atomic_read(&q->owned_by_drv_count));
> >> if (!ret)
> >> return 0;
> >>
> >> @@ -1810,7 +1846,7 @@ static int vb2_start_streaming(struct vb2_queue *q)
> >> /*
> >> * If you see this warning, then the driver isn't cleaning up properly
> >> * after a failed start_streaming(). See the start_streaming()
> >> - * documentation in videobuf2-v4l2.h for more information how buffers
> >> + * documentation in videobuf2-core.h for more information how buffers
> >> * should be returned to vb2 in start_streaming().
> >> */
> >> if (WARN_ON(atomic_read(&q->owned_by_drv_count))) {
> >> @@ -1841,11 +1877,13 @@ static int vb2_internal_qbuf(struct vb2_queue *q,
> >> struct v4l2_buffer *b)
> >> {
> >> int ret = vb2_queue_or_prepare_buf(q, b, "qbuf");
> >> struct vb2_buffer *vb;
> >> + struct vb2_v4l2_buffer *vbuf;
> >>
> >> if (ret)
> >> return ret;
> >>
> >> vb = q->bufs[b->index];
> >> + vbuf = to_vb2_v4l2_buffer(vb);
> >>
> >> switch (vb->state) {
> >> case VB2_BUF_STATE_DEQUEUED:
> >> @@ -1877,11 +1915,11 @@ static int vb2_internal_qbuf(struct vb2_queue *q,
> >> struct v4l2_buffer *b)
> >> * and the timecode field and flag if needed.
> >> */
> >> if ((q->timestamp_flags & V4L2_BUF_FLAG_TIMESTAMP_MASK) ==
> >> - V4L2_BUF_FLAG_TIMESTAMP_COPY)
> >> - vb->v4l2_buf.timestamp = b->timestamp;
> >> - vb->v4l2_buf.flags |= b->flags & V4L2_BUF_FLAG_TIMECODE;
> >> + V4L2_BUF_FLAG_TIMESTAMP_COPY)
> >> + vbuf->timestamp = b->timestamp;
> >> + vbuf->flags |= b->flags & V4L2_BUF_FLAG_TIMECODE;
> >> if (b->flags & V4L2_BUF_FLAG_TIMECODE)
> >> - vb->v4l2_buf.timecode = b->timecode;
> >> + vbuf->timecode = b->timecode;
> >> }
> >>
> >> trace_vb2_qbuf(q, vb);
> >> @@ -1903,13 +1941,13 @@ static int vb2_internal_qbuf(struct vb2_queue *q,
> >> struct v4l2_buffer *b)
> >> * then we can finally call start_streaming().
> >> */
> >> if (q->streaming && !q->start_streaming_called &&
> >> - q->queued_count >= q->min_buffers_needed) {
> >> + q->queued_count >= q->min_buffers_needed) {
> >> ret = vb2_start_streaming(q);
> >> if (ret)
> >> return ret;
> >> }
> >>
> >> - dprintk(1, "qbuf of buffer %d succeeded\n", vb->v4l2_buf.index);
> >> + dprintk(1, "qbuf of buffer %d succeeded\n", vb->index);
> >> return 0;
> >> }
> >>
> >> @@ -2099,9 +2137,11 @@ static void __vb2_dqbuf(struct vb2_buffer *vb)
> >> }
> >> }
> >>
> >> -static int vb2_internal_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b,
> >> bool nonblocking)
> >> +static int vb2_internal_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b,
> >> + bool nonblocking)
> >> {
> >> struct vb2_buffer *vb = NULL;
> >> + struct vb2_v4l2_buffer *vbuf = NULL;
> >> int ret;
> >>
> >> if (b->type != q->type) {
> >> @@ -2134,14 +2174,15 @@ static int vb2_internal_dqbuf(struct vb2_queue *q,
> >> struct v4l2_buffer *b, bool n
> >>
> >> trace_vb2_dqbuf(q, vb);
> >>
> >> + vbuf = to_vb2_v4l2_buffer(vb);
> >> if (!V4L2_TYPE_IS_OUTPUT(q->type) &&
> >> - vb->v4l2_buf.flags & V4L2_BUF_FLAG_LAST)
> >> + vbuf->flags & V4L2_BUF_FLAG_LAST)
> >> q->last_buffer_dequeued = true;
> >> /* go back to dequeued state */
> >> __vb2_dqbuf(vb);
> >>
> >> dprintk(1, "dqbuf of buffer %d, with state %d\n",
> >> - vb->v4l2_buf.index, vb->state);
> >> + vb->index, vb->state);
> >>
> >> return 0;
> >> }
> >> @@ -2197,7 +2238,7 @@ static void __vb2_queue_cancel(struct vb2_queue *q)
> >> /*
> >> * If you see this warning, then the driver isn't cleaning up properly
> >> * in stop_streaming(). See the stop_streaming() documentation in
> >> - * videobuf2-v4l2.h for more information how buffers should be returned
> >> + * videobuf2-core.h for more information how buffers should be returned
> >> * to vb2 in stop_streaming().
> >> */
> >> if (WARN_ON(atomic_read(&q->owned_by_drv_count))) {
> >> @@ -2399,7 +2440,7 @@ static int __find_plane_by_offset(struct vb2_queue
> >> *q, unsigned long off,
> >> vb = q->bufs[buffer];
> >>
> >> for (plane = 0; plane < vb->num_planes; ++plane) {
> >> - if (vb->v4l2_planes[plane].m.mem_offset == off) {
> >> + if (vb->planes[plane].m.offset == off) {
> >> *_buffer = buffer;
> >> *_plane = plane;
> >> return 0;
> >> @@ -2557,7 +2598,7 @@ int vb2_mmap(struct vb2_queue *q, struct
> >> vm_area_struct *vma)
> >> * The buffer length was page_aligned at __vb2_buf_mem_alloc(),
> >> * so, we need to do the same here.
> >> */
> >> - length = PAGE_ALIGN(vb->v4l2_planes[plane].length);
> >> + length = PAGE_ALIGN(vb->planes[plane].length);
> >> if (length < (vma->vm_end - vma->vm_start)) {
> >> dprintk(1,
> >> "MMAP invalid, as it would overflow buffer length\n");
> >> @@ -2577,10 +2618,10 @@ EXPORT_SYMBOL_GPL(vb2_mmap);
> >>
> >> #ifndef CONFIG_MMU
> >> unsigned long vb2_get_unmapped_area(struct vb2_queue *q,
> >> - unsigned long addr,
> >> - unsigned long len,
> >> - unsigned long pgoff,
> >> - unsigned long flags)
> >> + unsigned long addr,
> >> + unsigned long len,
> >> + unsigned long pgoff,
> >> + unsigned long flags)
> >> {
> >> unsigned long off = pgoff << PAGE_SHIFT;
> >> struct vb2_buffer *vb;
> >> @@ -2731,7 +2772,7 @@ EXPORT_SYMBOL_GPL(vb2_poll);
> >> * responsible of clearing it's content and setting initial values for
> >> some
> >> * required entries before calling this function.
> >> * q->ops, q->mem_ops, q->type and q->io_modes are mandatory. Please
> >> refer
> >> - * to the struct vb2_queue description in include/media/videobuf2-v4l2.h
> >> + * to the struct vb2_queue description in include/media/videobuf2-core.h
> >> * for more information.
> >> */
> >> int vb2_queue_init(struct vb2_queue *q)
> >> @@ -2739,16 +2780,16 @@ int vb2_queue_init(struct vb2_queue *q)
> >> /*
> >> * Sanity check
> >> */
> >> - if (WARN_ON(!q) ||
> >> - WARN_ON(!q->ops) ||
> >> - WARN_ON(!q->mem_ops) ||
> >> - WARN_ON(!q->type) ||
> >> - WARN_ON(!q->io_modes) ||
> >> - WARN_ON(!q->ops->queue_setup) ||
> >> - WARN_ON(!q->ops->buf_queue) ||
> >> - WARN_ON(q->timestamp_flags &
> >> - ~(V4L2_BUF_FLAG_TIMESTAMP_MASK |
> >> - V4L2_BUF_FLAG_TSTAMP_SRC_MASK)))
> >> + if (WARN_ON(!q) ||
> >> + WARN_ON(!q->ops) ||
> >> + WARN_ON(!q->mem_ops) ||
> >> + WARN_ON(!q->type) ||
> >> + WARN_ON(!q->io_modes) ||
> >> + WARN_ON(!q->ops->queue_setup) ||
> >> + WARN_ON(!q->ops->buf_queue) ||
> >> + WARN_ON(q->timestamp_flags &
> >> + ~(V4L2_BUF_FLAG_TIMESTAMP_MASK |
> >> + V4L2_BUF_FLAG_TSTAMP_SRC_MASK)))
> >> return -EINVAL;
> >>
> >> /* Warn that the driver should choose an appropriate timestamp type */
> >> @@ -2852,7 +2893,7 @@ static int __vb2_init_fileio(struct vb2_queue *q,
> >> int read)
> >> * Sanity check
> >> */
> >> if (WARN_ON((read && !(q->io_modes & VB2_READ)) ||
> >> - (!read && !(q->io_modes & VB2_WRITE))))
> >> + (!read && !(q->io_modes & VB2_WRITE))))
> >> return -EINVAL;
> >>
> >> /*
> >> @@ -3063,9 +3104,12 @@ static size_t __vb2_perform_fileio(struct vb2_queue
> >> *q, char __user *data, size_
> >> buf->queued = 0;
> >> buf->size = read ? vb2_get_plane_payload(q->bufs[index], 0)
> >> : vb2_plane_size(q->bufs[index], 0);
> >> - /* Compensate for data_offset on read in the multiplanar case.
> >> */
> >> + /*
> >> + * Compensate for data_offset on read
> >> + * in the multiplanar case
> >> + */
> >> if (is_multiplanar && read &&
> >> - fileio->b.m.planes[0].data_offset < buf->size) {
> >> + fileio->b.m.planes[0].data_offset < buf->size) {
> >> buf->pos = fileio->b.m.planes[0].data_offset;
> >> buf->size -= buf->pos;
> >> }
> >> @@ -3257,7 +3301,7 @@ static int vb2_thread(void *data)
> >> * contact the linux-media mailinglist first.
> >> */
> >> int vb2_thread_start(struct vb2_queue *q, vb2_thread_fnc fnc, void *priv,
> >> - const char *thread_name)
> >> + const char *thread_name)
> >> {
> >> struct vb2_threadio_data *threadio;
> >> int ret = 0;
> >> @@ -3491,7 +3535,7 @@ ssize_t vb2_fop_write(struct file *file, const char
> >> __user *buf,
> >> if (vb2_queue_is_busy(vdev, file))
> >> goto exit;
> >> err = vb2_write(vdev->queue, buf, count, ppos,
> >> - file->f_flags & O_NONBLOCK);
> >> + file->f_flags & O_NONBLOCK);
> >> if (vdev->queue->fileio)
> >> vdev->queue->owner = file->private_data;
> >> exit:
> >> @@ -3515,7 +3559,7 @@ ssize_t vb2_fop_read(struct file *file, char __user
> >> *buf,
> >> if (vb2_queue_is_busy(vdev, file))
> >> goto exit;
> >> err = vb2_read(vdev->queue, buf, count, ppos,
> >> - file->f_flags & O_NONBLOCK);
> >> + file->f_flags & O_NONBLOCK);
> >> if (vdev->queue->fileio)
> >> vdev->queue->owner = file->private_data;
> >> exit:
> >> diff --git a/include/media/videobuf2-core.h
> >> b/include/media/videobuf2-core.h
> >> index 155991e..8787a6c 100644
> >> --- a/include/media/videobuf2-core.h
> >> +++ b/include/media/videobuf2-core.h
> >> @@ -115,6 +115,16 @@ struct vb2_plane {
> >> void *mem_priv;
> >> struct dma_buf *dbuf;
> >> unsigned int dbuf_mapped;
> >> +
> >> + /* plane information */
> >> + unsigned int bytesused;
> >> + unsigned int length;
> >> + union {
> >> + unsigned int offset;
> >> + unsigned long userptr;
> >> + int fd;
> >> + } m;
> >> + unsigned int data_offset;
> >> };
> >
> > Nitpick: it would be good to add a documentation for struct vb2_plane,
> > describing what each field means on this struct. Granted, this could
> > be added after this patch series.
> >
> > Btw, I don't see much reason to have the:
> > /* plane information */
> > comment here, as this struct is all about plane information, right?
> > Or, maybe you wanted, instead, to comment that those fields should
> > have what's there at struct v4l2_plane? That would make sense ;)
>
> Latter is right.
>
> > So, I would change this comment to something like:
> >
> > /*
> > * Should contain enough plane information to contain the
> > * fields needed to fill struct v4l2_plane at videodev2.h
> > */
> >
> OK, I will change it.
> >
> >>
> >> /**
> >> @@ -161,41 +171,33 @@ struct vb2_queue;
> >>
> >> /**
> >> * struct vb2_buffer - represents a video buffer
> >> - * @v4l2_buf: struct v4l2_buffer associated with this buffer;
> >> can
> >> - * be read by the driver and relevant entries can
> >> be
> >> - * changed by the driver in case of CAPTURE types
> >> - * (such as timestamp)
> >> - * @v4l2_planes: struct v4l2_planes associated with this buffer; can
> >> - * be read by the driver and relevant entries can
> >> be
> >> - * changed by the driver in case of CAPTURE types
> >> - * (such as bytesused); NOTE that even for
> >> single-planar
> >> - * types, the v4l2_planes[0] struct should be used
> >> - * instead of v4l2_buf for filling bytesused -
> >> drivers
> >> - * should use the vb2_set_plane_payload() function
> >> for that
> >> * @vb2_queue: the queue to which this driver belongs
> >> - * @num_planes: number of planes in the buffer
> >> - * on an internal driver queue
> >> * @state: current buffer state; do not change
> >> * @queued_entry: entry on the queued buffers list, which holds
> >> all
> >> * buffers queued from userspace
> >> * @done_entry: entry on the list that stores all buffers ready
> >> to
> >> * be dequeued to userspace
> >> + * @index: id number of the buffer
> >> + * @type: buffer type
> >> + * @memory: the method, in which the actual data is passed
> >> + * @num_planes: number of planes in the buffer
> >> + * on an internal driver queue
> >> * @planes: private per-plane information; do not change
> >> */
> >> struct vb2_buffer {
> >> - struct v4l2_buffer v4l2_buf;
> >> - struct v4l2_plane v4l2_planes[VIDEO_MAX_PLANES];
> >> -
> >> struct vb2_queue *vb2_queue;
> >>
> >> - unsigned int num_planes;
> >> -
> >> -/* Private: internal use only */
> >> + /* Private: internal use only */
> >> enum vb2_buffer_state state;
> >>
> >> struct list_head queued_entry;
> >> struct list_head done_entry;
> >>
> >> + /* buffer information */
> >> + unsigned int index;
> >> + unsigned int type;
> >> + unsigned int memory;
> >> + unsigned int num_planes;
> >
> > Nitpick: Those comments that follow Documentation/kernel-doc-nano-HOWTO.txt
> > are used to produce DocBook data, on both html and manpages formats.
> > As documented there, DocBook discards documentation for all fields after a
> > /*private: ...*/ comment.
> >
> > In other words, we need to take care of putting things after /*private:*/
> > only when we're 100% sure that such fields are not meant to be filled/used
> > by the callers, and will be used only internally, and don't deserve any
> > documentation for the kABI.
> >
> > As you're adding documentation for those fields, and num_planes were
> > documented before your series, I suspect that this is not what you want.
> > So, please move them to be before the private: comment.
>
> Oh, I didn't know that /*private: ...*/ comment have so much meaning.
> I will change it at next round.
>
> >
> > Btw, if your patches are based on top of the current patchwork tree
> > e. g. if it has this patch:
> >
> > http://git.linuxtv.org/cgit.cgi/media_tree.git/commit/?id=d071c833a0d30e7aae0ea565d92ef83c79106d6f
> >
> > Then you can make the Kernel to handle all those kernel-doc-nano
> > comments with:
> >
> > make cleandocs && make DOCBOOKS=device-drivers.xml htmldocs
> >
> > It will produce some html pages like:
> >
> > http://linuxtv.org/downloads/v4l-dvb-internals/device-drivers/mediadev.html
> >
> > With can be useful to check if the documentation tags are properly placed.
> >
> >> struct vb2_plane planes[VIDEO_MAX_PLANES];
> >>
> >> #ifdef CONFIG_VIDEO_ADV_DEBUG
> >> @@ -390,7 +392,7 @@ struct v4l2_fh;
> >> * @threadio: thread io internal data, used only if thread is active
> >> */
> >> struct vb2_queue {
> >> - enum v4l2_buf_type type;
> >> + unsigned int type;
> >> unsigned int io_modes;
> >> unsigned fileio_read_once:1;
> >> unsigned fileio_write_immediately:1;
> >> @@ -409,7 +411,7 @@ struct vb2_queue {
> >>
> >> /* private: internal use only */
> >> struct mutex mmap_lock;
> >> - enum v4l2_memory memory;
> >> + unsigned int memory;
> >
> > Will the vb2-core use type/memory fields or just vb2-v4l2? As you
> > removed the enum, I suspect you won't be relying on having the videodev2.h
> > header included here, right.
>
> Exactly.
>
> >
> > If so, then the meaning of the type/memory fields are private to the
> > caller of the VB2-core (e. .g. the meaning are private to vb2-v4l2 and
> > vb2-dvb). So, you should be changing the description of those fields
> > at the doc-nano to:
> > ...
> > * @type: private type whose content is defined by the vb2-core caller.
> > * For example, for V4L2, it should match the V4L2_BUF_TYPE_*
> > * in include/uapi/linux/videodev2.h
> > ...
> >
> > to let it clear.
> >
>
> 0k, I will change it as your comment.
>
> >> struct vb2_buffer *bufs[VIDEO_MAX_FRAME];
> >> unsigned int num_buffers;
> >>
> >> @@ -571,7 +573,7 @@ static inline void vb2_set_plane_payload(struct
> >> vb2_buffer *vb,
> >> unsigned int plane_no, unsigned long size)
> >> {
> >> if (plane_no < vb->num_planes)
> >> - vb->v4l2_planes[plane_no].bytesused = size;
> >> + vb->planes[plane_no].bytesused = size;
> >> }
> >>
> >> /**
> >> @@ -583,7 +585,7 @@ static inline unsigned long
> >> vb2_get_plane_payload(struct vb2_buffer *vb,
> >> unsigned int plane_no)
> >> {
> >> if (plane_no < vb->num_planes)
> >> - return vb->v4l2_planes[plane_no].bytesused;
> >> + return vb->planes[plane_no].bytesused;
> >> return 0;
> >> }
> >>
> >> @@ -596,7 +598,7 @@ static inline unsigned long
> >> vb2_plane_size(struct vb2_buffer *vb, unsigned int plane_no)
> >> {
> >> if (plane_no < vb->num_planes)
> >> - return vb->v4l2_planes[plane_no].length;
> >> + return vb->planes[plane_no].length;
> >> return 0;
> >> }
> >>
> >> diff --git a/include/media/videobuf2-v4l2.h
> >> b/include/media/videobuf2-v4l2.h
> >> index d4a4d9a..fc2dbe9 100644
> >> --- a/include/media/videobuf2-v4l2.h
> >> +++ b/include/media/videobuf2-v4l2.h
> >> @@ -12,6 +12,32 @@
> >> #ifndef _MEDIA_VIDEOBUF2_V4L2_H
> >> #define _MEDIA_VIDEOBUF2_V4L2_H
> >>
> >> +#include <linux/videodev2.h>
> >> #include <media/videobuf2-core.h>
> >>
> >> +/**
> >> + * struct vb2_v4l2_buffer - video buffer information for v4l2
> >> + * @vb2_buf: video buffer 2
> >> + * @flags: buffer informational flags
> >> + * @field: enum v4l2_field; field order of the image in the buffer
> >> + * @timestamp: frame timestamp
> >> + * @timecode: frame timecode
> >> + * @sequence: sequence count of this frame
> >> + */
> >> +struct vb2_v4l2_buffer {
> >> + struct vb2_buffer vb2_buf;
> >> +
> >> + __u32 flags;
> >> + __u32 field;
> >> + struct timeval timestamp;
> >> + struct v4l2_timecode timecode;
> >> + __u32 sequence;
> >> +};
> >> +
> >> +/**
> >> + * to_vb2_v4l2_buffer() - cast struct vb2_buffer * to struct
> >> vb2_v4l2_buffer *
> >> + */
> >> +#define to_vb2_v4l2_buffer(vb) \
> >> + (container_of(vb, struct vb2_v4l2_buffer, vb2_buf))
> >> +
> >> #endif /* _MEDIA_VIDEOBUF2_V4L2_H */
> >
> > Regards,
> > Mauro
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-media" in
> > the body of a message to majord...@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
