On Fri, 28 Aug 2015, Peter Griffin wrote:

> This patch adds in the required DT node for the c8sectpfe
> Linux DVB demux driver which allows the tsin channels
> to be used on an upstream kernel.
> 
> Signed-off-by: Peter Griffin <peter.grif...@linaro.org>
> ---
>  arch/arm/boot/dts/stihxxx-b2120.dtsi | 35 +++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)

Acked-by: Lee Jones <lee.jo...@linaro.org>

> diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi 
> b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> index 62994ae..f9fca10 100644
> --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
> +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> @@ -6,6 +6,9 @@
>   * it under the terms of the GNU General Public License version 2 as
>   * published by the Free Software Foundation.
>   */
> +
> +#include <dt-bindings/clock/stih407-clks.h>
> +#include <dt-bindings/media/c8sectpfe.h>
>  / {
>       soc {
>               sbc_serial0: serial@9530000 {
> @@ -85,5 +88,37 @@
>                       status = "okay";
>               };
>  
> +             demux@08a20000 {
> +                     compatible      = "st,stih407-c8sectpfe";
> +                     status          = "okay";
> +                     reg             = <0x08a20000 0x10000>,
> +                                       <0x08a00000 0x4000>;
> +                     reg-names       = "c8sectpfe", "c8sectpfe-ram";
> +                     interrupts      = <GIC_SPI 34 IRQ_TYPE_NONE>,
> +                                       <GIC_SPI 35 IRQ_TYPE_NONE>;
> +                     interrupt-names = "c8sectpfe-error-irq",
> +                                       "c8sectpfe-idle-irq";
> +                     pinctrl-0       = <&pinctrl_tsin0_serial>;
> +                     pinctrl-1       = <&pinctrl_tsin0_parallel>;
> +                     pinctrl-2       = <&pinctrl_tsin3_serial>;
> +                     pinctrl-3       = <&pinctrl_tsin4_serial_alt3>;
> +                     pinctrl-4       = <&pinctrl_tsin5_serial_alt1>;
> +                     pinctrl-names   = "tsin0-serial",
> +                                       "tsin0-parallel",
> +                                       "tsin3-serial",
> +                                       "tsin4-serial",
> +                                       "tsin5-serial";
> +                     clocks          = <&clk_s_c0_flexgen CLK_PROC_STFE>;
> +                     clock-names     = "c8sectpfe";
> +
> +                     /* tsin0 is TSA on NIMA */
> +                     tsin0: port@0 {
> +                             tsin-num        = <0>;
> +                             serial-not-parallel;
> +                             i2c-bus         = <&ssc2>;
> +                             rst-gpio        = <&pio15 4 GPIO_ACTIVE_HIGH>;
> +                             dvb-card        = <STV0367_TDA18212_NIMA_1>;
> +                     };
> +             };
>       };
>  };

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to