Hi Roger, > I'm not able to enable any protocols. Nothing happens when running > ir-keytable with "-p rc-5". Nothing shows in the row "Enabled protocols" and > nothing happens when testing with "ir-keytable -t". try to give it the device, e.g.
ir-keytable -d /dev/input/event14 -t I was able to get output from it. The device is now running for a week under mythbackend. greetings, Erik Am 19.09.2015 um 23:48 schrieb Roger Mårtensson: > Den 2015-09-19 kl. 23:39, skrev Roger Mårtensson: >> Den 2015-09-11 kl. 17:04, skrev Erik Andresen: >>> Hi, >>> >>> I recently got a Terratec H7 in Revision 4 and turned out that it is not >>> just a new revision, but a new product with USB ProductID 0x10a5. >>> Previous revisions have been AZ6007, but this revision does not work >>> with this driver [1]. >>> >>> Output of lsusb (extended output attached): >>> Bus 001 Device 011: ID 0ccd:10a5 TerraTec Electronic GmbH >>> >>> The revision 4 seems to a DVBSky variant, adding its Product ID to >>> dvbsky.c with the attached patch enabled me to scan for channels and >>> watch DVB-C and DVB-T. >>> >>> greetings, >>> Erik >>> >>> [1] https://www.mail-archive.com/linux-media@vger.kernel.org/msg70934.html >> Do I feel lucky or what.. >> Just got my H7 devices delivered and noticed the lack of supported driver >> and some quick searches gave me this e-mail. >> Maybe should take a trip to the race track. :) >> >> I have tried this driver and it works wonderfully. I have noticed a freeze >> or two when handling the device (powering off, ripping USB etc) but I'm not >> sure it is the driver that is causing this. >> >> I do notice something weird. The remote doesn't seem to work. >> Found /sys/class/rc/rc0/ (/dev/input/event14) with: >> Driver dvb_usb_dvbsky, table rc-tt-1500 >> Supported protocols: RC-5 >> Enabled protocols: >> Name: Terratec H7 Rev.4 >> bus: 3, vendor/product: 0ccd:10a5, version: 0x0000 >> Repeat delay = 500 ms, repeat period = 125 ms >> >> I'm not able to enable any protocols. Nothing happens when running >> ir-keytable with "-p rc-5". Nothing shows in the row "Enabled protocols" and >> nothing happens when testing with "ir-keytable -t". >> >> I've tested on a Ubuntu 14.04 (Mythbuntu) with Linux Kernel 4.2 that I have >> to compile myself. (Don't know in which kernel dvbsky was released) >> Tested using both Kaffeine and MythTV and it works like a charm (with the >> exception of missing IR). >> I tested using DVB-C with CI for encrypted channels > One more this.. > Is there a possibility that Signal strength support could be added to the > driver? > MythTV uses this and I think Kaffeine also uses it (not sure). Currently the > logs are filling up with "Operation not supported".
signature.asc
Description: OpenPGP digital signature