Hi Laurent, On Monday 09 November 2015 14:46:42 Laurent Pinchart wrote: > Hi Markus, > > Thank you for the patch. > > On Friday 06 November 2015 14:13:44 Markus Pargmann wrote: > > The power_on function of the driver resets the chip and sets the > > CHIP_CONTROL register to 0. This switches the operating mode to slave. > > The s_stream function sets the correct mode. But this caused problems on > > a board where the camera chip is operated as master. The camera started > > after a random amount of time streaming an image, I observed between 10 > > and 300 seconds. > > > > The STRFM_OUT and STLN_OUT pins are not connected on this board which > > may cause some issues in slave mode. I could not find any documentation > > about this. > > > > Keeping the chip in master mode after the reset helped to fix this > > issue for me. > > > > Signed-off-by: Markus Pargmann <m...@pengutronix.de> > > --- > > drivers/media/i2c/mt9v032.c | 3 ++- > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c > > index 4aefde9634f5..943c3f39ea73 100644 > > --- a/drivers/media/i2c/mt9v032.c > > +++ b/drivers/media/i2c/mt9v032.c > > @@ -344,7 +344,8 @@ static int mt9v032_power_on(struct mt9v032 *mt9v032) > > if (ret < 0) > > return ret; > > > > - return regmap_write(map, MT9V032_CHIP_CONTROL, 0); > > + return regmap_write(map, MT9V032_CHIP_CONTROL, > > + MT9V032_CHIP_CONTROL_MASTER_MODE); > > This makes sense, but shouldn't you also fix the mt9v032_s_stream() function > then ? It clears the MT9V032_CHIP_CONTROL_MASTER_MODE bit when turning the > stream off.
Oh yes, thanks. Will fix it for the next version. Best Regards, Markus -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
signature.asc
Description: This is a digitally signed message part.
