Hi Christian, Thanks for reporting back your experience. Certainly there's a chance of supporting the second tuner too. There are still two issues that I have not solved:
1. I haven't gotten the 2nd tuner working yet (alone, without the first tuner), even if I think all the pieces of the puzzle are there. 2. em28xx driver is built with one tuner in mind and needs significant structural changes. If there's anyone very familiar with the em28xx driver here, I'd be happy to hear your idea of what is entailed for this. Cheers, -olli On 10 April 2016 at 18:23, Christian Steiner <christian.stei...@outlook.de> wrote: > > On 04.04.2016 17:12, Olli Salonen wrote: > > Hauppauge WinTV-dualHD is a USB 2.0 dual DVB-T/T2/C tuner with > > following components: > > > > USB bridge: Empia EM28274 (chip id is the same as EM28174) > > Demodulator: 2x Silicon Labs Si2168-B40 > > Tuner: 2x Silicon Labs Si2157-A30 > > > > This patch adds support only for the first tuner. > > > > [...] > > Thank you very much! > Works fine for me: > > > [ 419.413188] em28xx: New device HCW dualHD @ 480 Mbps (2040:0265, > > interface 0, class 0) > > [ 419.413195] em28xx: DVB interface 0 found: isoc > > [ 419.413265] em28xx: chip ID is em28174 > > [ 420.529619] em28174 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x7addc1c8 > > [ 420.529626] em28174 #0: EEPROM info: > > [ 420.529630] em28174 #0: microcode start address = 0x0004, boot > > configuration = 0x01 > > [ 420.536077] em28174 #0: AC97 audio (5 sample rates) > > [ 420.536084] em28174 #0: 500mA max power > > [ 420.536089] em28174 #0: Table at offset 0x27, strings=0x0e6a, > > 0x1888, 0x087e > > [ 420.536188] em28174 #0: Identified as Hauppauge WinTV-dualHD DVB > > (card=98) > > [ 420.537974] tveeprom 8-0050: Hauppauge model 204109, rev B2I6, serial# > > 11XXXXXX > > [ 420.537981] tveeprom 8-0050: tuner model is SiLabs Si2157 (idx 186, type > > 4) > > [ 420.537986] tveeprom 8-0050: TV standards PAL(B/G) NTSC(M) PAL(I) > > SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) > > [ 420.537989] tveeprom 8-0050: audio processor is None (idx 0) > > [ 420.537993] tveeprom 8-0050: has no radio, has IR receiver, has no IR > > transmitter > > [ 420.537997] em28174 #0: dvb set to isoc mode. > > [ 420.538056] usbcore: registered new interface driver em28xx > > [ 420.541087] em28174 #0: Binding DVB extension > > [ 420.544008] i2c i2c-8: Added multiplexed i2c bus 9 > > [ 420.544016] si2168 8-0064: Silicon Labs Si2168 successfully attached > > [ 420.548372] si2157 9-0060: Silicon Labs Si2147/2148/2157/2158 > > successfully attached > > [ 420.548389] DVB: registering new adapter (em28174 #0) > > [ 420.548396] usb 2-2: DVB: registering adapter 0 frontend 0 (Silicon Labs > > Si2168)... > > [ 420.549737] em28174 #0: DVB extension successfully initialized > > [ 420.549743] em28xx: Registered (Em28xx dvb Extension) extension > > [ 435.418798] si2168 8-0064: found a 'Silicon Labs Si2168-B40' > > [ 435.418823] si2168 8-0064: downloading firmware from file > > 'dvb-demod-si2168-b40-01.fw' > > [ 435.617181] si2168 8-0064: firmware version: 4.0.11 > > [ 435.619791] si2157 9-0060: found a 'Silicon Labs Si2157-A30' > > [ 435.642006] si2157 9-0060: firmware version: 3.0.5 > > (I have replaced the last digits of the serial number with X) > > Is there any chance to add support for the second tuner, too? > This would be awesome. > > Best, > Christian > > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
