On 05/26/2016 04:59 PM, Andrey Utkin wrote:
Could anybody please give a hint - which kernel-defined i2c objects, and how
many of them, I need to define and use to substitute these driver-defined
functions i2c_read(), i2c_write() ?
https://github.com/bluecherrydvr/linux/blob/release/tw5864/1.16/drivers/media/pci/tw5864/tw5864-config.c
In a word, there's 4 chips with different addresses, to which this code
communicates via main chip's dedicated registers.
Do i need a single i2c_adapter or several?
Do i need i2c_client entities?
where should I put what is named "devid" here?
Thanks in advance.
It depends how those are connected at hardware level. Quickly looking I
think "devid" is here to select proper I2C adapter. So I think there is
4 I2C adapters and each of those adapter has 1 slave device. Is that
correct? If yes, then register 4 I2C adapters and register single client
for each of those adapters.
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
