As Gcc6.1 warned, those tables are currently unused:
        drivers/media/tuners/r820t.c:349:18: warning: 'r820t_mixer_gain_steps' 
defined but not used [-Wunused-const-variable=]
         static const int r820t_mixer_gain_steps[]  = {
                          ^~~~~~~~~~~~~~~~~~~~~~
        drivers/media/tuners/r820t.c:345:18: warning: 'r820t_lna_gain_steps' 
defined but not used [-Wunused-const-variable=]
         static const int r820t_lna_gain_steps[]  = {
                          ^~~~~~~~~~~~~~~~~~~~

They're actually used only by a routine that it is currently
commented out. So, move those tables to be together with such
code and comment them out.

Signed-off-by: Mauro Carvalho Chehab <mche...@s-opensource.com>
---
 drivers/media/tuners/r820t.c | 29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

diff --git a/drivers/media/tuners/r820t.c b/drivers/media/tuners/r820t.c
index 6ab35e315fe7..08dca40356d2 100644
--- a/drivers/media/tuners/r820t.c
+++ b/drivers/media/tuners/r820t.c
@@ -337,20 +337,6 @@ static int r820t_xtal_capacitor[][2] = {
 };
 
 /*
- * measured with a Racal 6103E GSM test set at 928 MHz with -60 dBm
- * input power, for raw results see:
- *     http://steve-m.de/projects/rtl-sdr/gain_measurement/r820t/
- */
-
-static const int r820t_lna_gain_steps[]  = {
-       0, 9, 13, 40, 38, 13, 31, 22, 26, 31, 26, 14, 19, 5, 35, 13
-};
-
-static const int r820t_mixer_gain_steps[]  = {
-       0, 5, 10, 10, 19, 9, 10, 25, 17, 10, 8, 16, 13, 6, 3, -8
-};
-
-/*
  * I2C read/write code and shadow registers logic
  */
 static void shadow_store(struct r820t_priv *priv, u8 reg, const u8 *val,
@@ -1216,6 +1202,21 @@ static int r820t_read_gain(struct r820t_priv *priv)
 
 #if 0
 /* FIXME: This routine requires more testing */
+
+/*
+ * measured with a Racal 6103E GSM test set at 928 MHz with -60 dBm
+ * input power, for raw results see:
+ *     http://steve-m.de/projects/rtl-sdr/gain_measurement/r820t/
+ */
+
+static const int r820t_lna_gain_steps[]  = {
+       0, 9, 13, 40, 38, 13, 31, 22, 26, 31, 26, 14, 19, 5, 35, 13
+};
+
+static const int r820t_mixer_gain_steps[]  = {
+       0, 5, 10, 10, 19, 9, 10, 25, 17, 10, 8, 16, 13, 6, 3, -8
+};
+
 static int r820t_set_gain_mode(struct r820t_priv *priv,
                               bool set_manual_gain,
                               int gain)
-- 
2.7.4


--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to