From: Richard Röjfors <richard.rojf...@mocean-labs.com>
Add support for ADMA on SDHCI hosts, not supporting SDMA.
According to the SDHCI specifications a host can support ADMA but not SDMA
Signed-off-by: Richard Röjfors <richard.rojf...@mocean-labs.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <a...@linux-foundation.org>
---
drivers/mmc/host/sdhci-pci.c | 2 -
drivers/mmc/host/sdhci.c | 38 +++++++++++++++------------------
drivers/mmc/host/sdhci.h | 4 +--
3 files changed, 21 insertions(+), 23 deletions(-)
diff -puN drivers/mmc/host/sdhci-pci.c~sdhci-support-for-adma-only-hosts
drivers/mmc/host/sdhci-pci.c
--- a/drivers/mmc/host/sdhci-pci.c~sdhci-support-for-adma-only-hosts
+++ a/drivers/mmc/host/sdhci-pci.c
@@ -396,7 +396,7 @@ static int sdhci_pci_enable_dma(struct s
if (((pdev->class & 0xFFFF00) == (PCI_CLASS_SYSTEM_SDHCI << 8)) &&
((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) &&
- (host->flags & SDHCI_USE_DMA)) {
+ (host->flags & SDHCI_USE_SDMA)) {
dev_warn(&pdev->dev, "Will use DMA mode even though HW "
"doesn't fully claim to support it.\n");
}
diff -puN drivers/mmc/host/sdhci.c~sdhci-support-for-adma-only-hosts
drivers/mmc/host/sdhci.c
--- a/drivers/mmc/host/sdhci.c~sdhci-support-for-adma-only-hosts
+++ a/drivers/mmc/host/sdhci.c
@@ -655,7 +655,7 @@ static void sdhci_prepare_data(struct sd
count = sdhci_calc_timeout(host, data);
sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
- if (host->flags & SDHCI_USE_DMA)
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
host->flags |= SDHCI_REQ_USE_DMA;
/*
@@ -1600,7 +1600,7 @@ int sdhci_resume_host(struct sdhci_host
{
int ret;
- if (host->flags & SDHCI_USE_DMA) {
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma)
host->ops->enable_dma(host);
}
@@ -1681,23 +1681,20 @@ int sdhci_add_host(struct sdhci_host *ho
caps = sdhci_readl(host, SDHCI_CAPABILITIES);
if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
- host->flags |= SDHCI_USE_DMA;
- else if (!(caps & SDHCI_CAN_DO_DMA))
- DBG("Controller doesn't have DMA capability\n");
+ host->flags |= SDHCI_USE_SDMA;
+ else if (!(caps & SDHCI_CAN_DO_SDMA))
+ DBG("Controller doesn't have SDMA capability\n");
else
- host->flags |= SDHCI_USE_DMA;
+ host->flags |= SDHCI_USE_SDMA;
if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
- (host->flags & SDHCI_USE_DMA)) {
+ (host->flags & SDHCI_USE_SDMA)) {
DBG("Disabling DMA as it is marked broken\n");
- host->flags &= ~SDHCI_USE_DMA;
+ host->flags &= ~SDHCI_USE_SDMA;
}
- if (host->flags & SDHCI_USE_DMA) {
- if ((host->version >= SDHCI_SPEC_200) &&
- (caps & SDHCI_CAN_DO_ADMA2))
- host->flags |= SDHCI_USE_ADMA;
- }
+ if ((host->version >= SDHCI_SPEC_200) && (caps & SDHCI_CAN_DO_ADMA2))
+ host->flags |= SDHCI_USE_ADMA;
if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
(host->flags & SDHCI_USE_ADMA)) {
@@ -1705,13 +1702,14 @@ int sdhci_add_host(struct sdhci_host *ho
host->flags &= ~SDHCI_USE_ADMA;
}
- if (host->flags & SDHCI_USE_DMA) {
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma) {
if (host->ops->enable_dma(host)) {
printk(KERN_WARNING "%s: No suitable DMA "
"available. Falling back to PIO.\n",
mmc_hostname(mmc));
- host->flags &= ~(SDHCI_USE_DMA |
SDHCI_USE_ADMA);
+ host->flags &=
+ ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
}
}
}
@@ -1739,7 +1737,7 @@ int sdhci_add_host(struct sdhci_host *ho
* mask, but PIO does not need the hw shim so we set a new
* mask here in that case.
*/
- if (!(host->flags & SDHCI_USE_DMA)) {
+ if (!(host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))) {
host->dma_mask = DMA_BIT_MASK(64);
mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
}
@@ -1816,7 +1814,7 @@ int sdhci_add_host(struct sdhci_host *ho
*/
if (host->flags & SDHCI_USE_ADMA)
mmc->max_hw_segs = 128;
- else if (host->flags & SDHCI_USE_DMA)
+ else if (host->flags & SDHCI_USE_SDMA)
mmc->max_hw_segs = 1;
else /* PIO */
mmc->max_hw_segs = 128;
@@ -1899,10 +1897,10 @@ int sdhci_add_host(struct sdhci_host *ho
mmc_add_host(mmc);
- printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s%s\n",
+ printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s\n",
mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
- (host->flags & SDHCI_USE_ADMA)?"A":"",
- (host->flags & SDHCI_USE_DMA)?"DMA":"PIO");
+ (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
+ (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
sdhci_enable_card_detection(host);
diff -puN drivers/mmc/host/sdhci.h~sdhci-support-for-adma-only-hosts
drivers/mmc/host/sdhci.h
--- a/drivers/mmc/host/sdhci.h~sdhci-support-for-adma-only-hosts
+++ a/drivers/mmc/host/sdhci.h
@@ -143,7 +143,7 @@
#define SDHCI_CAN_DO_ADMA2 0x00080000
#define SDHCI_CAN_DO_ADMA1 0x00100000
#define SDHCI_CAN_DO_HISPD 0x00200000
-#define SDHCI_CAN_DO_DMA 0x00400000
+#define SDHCI_CAN_DO_SDMA 0x00400000
#define SDHCI_CAN_VDD_330 0x01000000
#define SDHCI_CAN_VDD_300 0x02000000
#define SDHCI_CAN_VDD_180 0x04000000
@@ -252,7 +252,7 @@ struct sdhci_host {
spinlock_t lock; /* Mutex */
int flags; /* Host attributes */
-#define SDHCI_USE_DMA (1<<0) /* Host is DMA capable */
+#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */
#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */
#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */
#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */
_
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
