This patch adds MMC1 and MMC2 Controller data for OMAP4430 Board
file.
Signed-off-by: Kishore Kadiyala <kishore.kadiy...@ti.com>
---
arch/arm/mach-omap2/Makefile | 3 +-
arch/arm/mach-omap2/board-4430sdp.c | 39 ++++++++++++++++++++++++++++------
2 files changed, 34 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ffe600a..65d8d11 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -140,7 +140,8 @@ obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
hsmmc.o
obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
hsmmc.o
-obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
+obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \
+ hsmmc.o
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
diff --git a/arch/arm/mach-omap2/board-4430sdp.c
b/arch/arm/mach-omap2/board-4430sdp.c
index f1b9708..c4e61d5 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -33,6 +33,7 @@
#include <plat/control.h>
#include <plat/timer-gp.h>
#include <plat/usb.h>
+#include "hsmmc.h"
#define ETHERNET_KS8851_IRQ 34
#define ETHERNET_KS8851_POWER_ENABLE 48
@@ -93,16 +94,27 @@ static struct omap_musb_board_data musb_board_data = {
.power = 100,
};
-static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
+static struct omap2_hsmmc_info mmc[] = {
{
- .supply = "vmmc",
+ .mmc = 1,
+ .wires = 8,
+ /* "mmc0_cd" is not a gpio interrupt
+ * but is a phoenix interrupt
+ */
+ .gpio_cd = TWL6030_IRQ_BASE + MMCDETECT_INTR_OFFSET,
+ .gpio_wp = -EINVAL,
},
{
- .supply = "vmmc",
- },
- {
- .supply = "vmmc",
+ .mmc = 2,
+ .wires = 8,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ .nonremovable = true,
},
+ {} /* Terminator */
+};
+
+static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
{
.supply = "vmmc",
},
@@ -111,6 +123,18 @@ static struct regulator_consumer_supply
sdp4430_vmmc_supply[] = {
},
};
+static int __init sdp4430_mmc_init(void)
+{
+ omap2_hsmmc_init(mmc);
+
+ /* link regulators to MMC adapters ... we "know" the
+ * regulators will be set up only *after* we return.
+ */
+ sdp4430_vmmc_supply[0].dev = mmc[0].dev;
+ sdp4430_vmmc_supply[1].dev = mmc[1].dev;
+ return 0;
+}
+
static struct regulator_init_data sdp4430_vaux1 = {
.constraints = {
.min_uV = 1000000,
@@ -162,7 +186,7 @@ static struct regulator_init_data sdp4430_vmmc = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 5,
+ .num_consumer_supplies = 2,
.consumer_supplies = sdp4430_vmmc_supply,
};
@@ -281,6 +305,7 @@ static void __init omap_4430sdp_init(void)
omap4_i2c_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
omap_serial_init();
+ sdp4430_mmc_init();
/* OMAP4 SDP uses internal transceiver so register nop transceiver */
usb_nop_xceiv_register();
/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
--
1.6.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
