Le 12/05/2010 23:19, Andrew Morton : > On Tue, 11 May 2010 19:09:53 +0200 > Nicolas Ferre <nicolas.fe...@atmel.com> wrote: > >> As we were using an internal dma flushing routine, this patch changes to the >> DMA API flush_kernel_dcache_page(). Driver is able to compile now. >> >> Signed-off-by: Nicolas Ferre <nicolas.fe...@atmel.com> >> --- >> drivers/mmc/host/at91_mci.c | 2 +- >> 1 files changed, 1 insertions(+), 1 deletions(-) >> >> diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c >> index a6dd7da..813d208 100644 >> --- a/drivers/mmc/host/at91_mci.c >> +++ b/drivers/mmc/host/at91_mci.c >> @@ -315,7 +315,7 @@ static void at91_mci_post_dma_read(struct at91mci_host >> *host) >> } >> >> kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ); >> - dmac_flush_range((void *)sgbuffer, ((void *)sgbuffer) + amount); >> + flush_kernel_dcache_page(sg_page(sg)); >> data->bytes_xfered += amount; >> if (size == 0) >> break; > > The flush_kernel_dcache_page() documentation specifically says that > thou shalt run flush_kernel_dcache_page() _prior_ to kunmapping the > page. > > I don't know if that makes a difference in the real world, but heck why > not: > > --- a/drivers/mmc/host/at91_mci.c~mmc-at91_mci-modify-cache-flush-routines-fix > +++ a/drivers/mmc/host/at91_mci.c > @@ -314,8 +314,8 @@ static void at91_mci_post_dma_read(struc > dmabuf = (unsigned *)tmpv; > } > > - kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ); > flush_kernel_dcache_page(sg_page(sg)); > + kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ); > data->bytes_xfered += amount; > if (size == 0) > break; > _
Andrew, thanks a lot for folding this in my patch. I had no access to my emails last days and it was good to learn that this patch went to 2.6.34-final. Best regards, -- Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
