If suspend called when kmmcd is doing host->ops->disable,
as kmmcd already increased host->en_dis_recurs to 1, the mmc_host_enable
in suspend function will return directly without increase the nesting_cnt,
which will cause the followed register access carried out to the disabled host.
mmc_suspend_host will enable host itself. No need to enable host before it.
Also works on kmmcd will get flushed in mmc_suspend_host, enable host after
it will be safe. So make the mmc_host_enable after it.
Signed-off-by: Ethan <ethan....@gmail.com>
---
drivers/mmc/host/omap_hsmmc.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index b032828..fc74263 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2291,8 +2291,8 @@ static int omap_hsmmc_suspend(struct device *dev)
}
}
cancel_work_sync(&host->mmc_carddetect_work);
- mmc_host_enable(host->mmc);
ret = mmc_suspend_host(host->mmc);
+ mmc_host_enable(host->mmc);
if (ret == 0) {
omap_hsmmc_disable_irq(host);
OMAP_HSMMC_WRITE(host->base, HCTL,
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
